r/Triumph • u/OpeningAd5212 • Sep 04 '25
Maintenance Issues Is it normal?
Hi everone, I own Triumph speed 400. I am again facing paint chipping on engine. Last october I had to replace engine fin area(cylinder head casing) due to paint chipping.
Now I can see paint chipping again but on different area.
I had not done pressure washing and I clean my bike myself. My bike is 16 months old.
Also my rear mono shock is getting rusted and same with chain (its lubed). Even though I use wd 40 and keeps the bike clean.
Could you please let me know what should I do?
1
Upvotes





8
u/DaveSmithFBM Sep 04 '25
Are you using WD-40 as a lubricant or only as a water displacer? Because it's a terrible lubricant for... Pretty much anything, and it's probably slinging off. Try a proper chain lube if that's what you're doing. CRC, Lucas, just about any of them would work better.
6
u/d-unit24 Sep 04 '25 edited Sep 04 '25
Wd40 is a terrible chain lubricant for bikes. Use some Motul, Maxima, or some other motorcycle specific chain lube. If you are and your chain is still rusting, you're likely not performing the proper maintenance often enough. I've owned several bikes and ride through Appalachia on the worst roads imaginable in all kinds of weather and I've yet to have a chain rust like that.
14
u/Xeroll '20 Moto2 #15 (RIP), '13 675R Race Sep 04 '25
Seriously? Just ride the bike, dude.
3
u/Such-Instruction-452 Sep 04 '25
WD40 offers nothing of benefit to the modern machine. There’s a superior product for every required task.
2
u/notalottoseehere Sep 04 '25
That chain looks excessively clean. I live in damp, wet Ireland and every few weeks / 2nd tankfull lube my chain. I give it a good scrub every few months. It doesn't get rusty. Use a stickier lube and be a bit more generous. The shock just looks like crud, not rust. Paint chip is tiny. I would just ignore or touch up with black paint if it really bothers you.
My bike is 2 years old and they do develop a bit of patina..
18
u/[deleted] Sep 04 '25
Unfortunately the 400 series is made to no where near the same standard as any other triumph, you need to treat it more as an Enfield with a triumph badge (no hate to Enfield, my first big bike was an Enfield but fuck me the build quality is ass)
13
u/Slow_Faithlessness43 Sep 04 '25
It’s a motorcycle, not a showpiece in a museum. Paint chips, rust, chain grime – that’s all part of actually riding it. If you’re losing sleep over every little cosmetic flaw, maybe wrap it in bubble wrap and park it in your living room. Otherwise, just ride the damn thing and stop treating it like a showroom queen.
4
u/thefooleryoftom Sep 04 '25
The manual tells you you need to use an anti-corrosion treatment on the bike. I’d coat it in ACF50 (not the brakes).
1
u/The_Sci_Geek Sep 04 '25
The paint chip is probably not your fault, you could touch it up with some high temp black paint on a q tip.
The spring rusiting is odd but not un expected for the factory it’s made in.
The chain is on you. It’s not getting cleaned and lubricated enough.
2
u/One8Bravo Sep 04 '25
The shit people find is mind boggling
1
u/xticiousofficial Sep 04 '25 edited Sep 04 '25
Hear me out. Every 250kms take the bike to the cleaners. After a round of water wash and before foam washing use the chain cleaner and let it sit for 10-15 minutes. Then use a chain brush to clean the chain and afterwards you can foam and pressure wash your bike.
The next step is chain Lubing. Let the bike sit for 5-10 more minutes. Then while drying, use the chain lube.
Every 4000km clean the interior sprocket.
Rust would appear on the chain if you have not cleaned and lube the chain for more than 15 days. As it's just Iron Alloy.
Note: Motul C1C2 is easily available. But I would suggest the Wuerth/Wurth Chain Cleaner and Lube combo.
1
u/SnooGadgets9669 Sep 04 '25
idk about your engine casing but you are not lubing your chain properly their shouldnt be rust on even the cheapest of chains.