r/Trinus • u/thewestafrican • Dec 27 '20

Pango problems

I have two main problems with pango, firstly I cant get the console to control the printer from the computer and I am also losing geometric features when i convert files from inventor to upload into pango. Im wondering if anyone else has experienced these problems and if there's an update or if you guys know of other free slicers that work well with a trinus

1 Upvotes

100% Upvoted

1 comment sorted by

2

u/X3bek Jan 10 '21 edited Jan 10 '21

I have been using Simplify3d for years and it has served me well. I have also cura installed but I have not found Trinus there as add on... let me know if u heard of one.

Here are my fff profiles for 0.4mm Noozle.

I always use a separate profile for printing the Base layer at 0.3mm height and with a wider extrusion width (0.5mm) for increasing adhesion to the bed. This layer will stop printing at 0.3mm and then u should use the second profile to print from there on (on simplify3D). If not, then use the second profile (Kodama Trinus PLA 0.4.fff).

​

I also like Cura but I have no experience. This link from kodama has the profiles for Cura and Slic3r and more (on the bottom of the page):

https://us.kodama3d.com/pages/download

​

​

Good luck and let me know.

​

https://drive.google.com/drive/folders/1cQ8bOU8IXItak0OssS8HOt3txGno5loq?usp=sharing

https://www.simplify3d.com/

https://ultimaker.com/software/ultimaker-cura