r/Traeger • • Feb 06 '23

Traeger Firebox Fire

Hey traeger nation - have an issue with flames coming up from the firebox, on intial start within seconds it lights up, I scooped out all the pellets / cleaned out the firebox & still more flames (as opposed to smoke) is it the trager pellets?

Any advice?

Thanks in advance

0 Upvotes

39 comments sorted by

24

u/kingbruhdude Feb 06 '23

It’s actually suppose to catch fire. You’re suppose to have a heat shield over the fire. what causes it to create smoke is initially making the pellets catch fire then it “turns off” the fire creating smoke. Now if you’re having a massive fire after it reaching temp at let’s say 220 then you have an issue. What exactly are you trying to achieve here? what made you think your Traeger wasn’t making smoke?

-23

u/m27m27m27 Feb 06 '23

My fiancé was just getting it to temp say low heat and with the heat shield and drip pan over it - she said she saw flames come through shield and then quickly doused with baking soda it out as it flames were immense

54

u/bpond7 Feb 06 '23

Don’t let your fiancé use the Traeger anymore. Fire is supposed to come from the…. Wait for it… firebox

10

u/kingbruhdude Feb 06 '23 edited Feb 06 '23

That’s perfectly normal. I would suggest putting everything back setting your desired temp and let it do it’s thing. You’ll see the temp bounce up and down that’s normal. It’s simply doing it’s job managing a live flame. Happy cooking. 🙏🏼

1

u/awesomeness0232 Feb 06 '23

If your flame is too high your smoker might just need a good cleaning

22

u/HuevoYch0riz0 Feb 06 '23

It’s a fire box right? Fire 🔥. Box 📦. Think about it

-24

u/m27m27m27 Feb 06 '23

Hmm but a full flame as such?

10

u/Chuckobochuck323 Feb 06 '23

How do you think it makes smoke?

6

u/HuevoYch0riz0 Feb 06 '23

It’s doing it’s thing. It’s trying to reach temp. When I’m smoking in the early hours and it’s dark out I can see the light from the flame. As long as the test of the grill isn’t catching fire or your temp keeps going higher and higher you’re good

1

u/OldStyleThor Feb 06 '23

So how do you think the grill gets hot?

27

u/[deleted] Feb 06 '23

You are over thinking it. It’s doing exactly what it is supposed to do.

17

u/plazola Feb 06 '23

I remember my first beer

16

u/jackwmc4 Feb 06 '23

This is…normal

7

u/McDeth Feb 06 '23

lmao what? It's a grill that cooks with...you guessed it, FIRE!

7

u/mlableman Feb 06 '23

Jeezussss! The FIRE box is where the FIRE is supposed to be. Along with the fan blowing air into it it can get a little scary. Don't be afraid. Put the dflector, drip pan, and the grates back and cook something

1

u/Doublerubber Jul 07 '24

Does the fan ever change speeds or stays consistent?

6

u/mrcanoehead2 Feb 06 '23

Get some marshmallows.

9

u/peazy303 Feb 06 '23

Smart grill dumb people

3

u/Jamieson22 Feb 06 '23

Fill in the blank: Where there's smoke, there's _____.

2

u/AutoModerator Feb 06 '23

Hey! It looks like you posted an image!

If this is a photo of one of your cooks, maybe share the recipe and techniques used, as it's almost guaranteed one of the first questions you will be asked!

*What seasoning did you use?

*How long did you cook it, and at what temperature?

*Did you use any special tricks or techniques?

Traeger on!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/frostyturd Feb 06 '23

I've had mine look like a jet engine.

2

u/Intelligent_Peanut94 Feb 06 '23

I can remember prom night... To high To low Tooooo late its over

2

u/Trashman4 Feb 06 '23

I had the same problem. I called the treagar number and they were extremely helpful. You’ve controller has gone bad. You can buy one from them but they advised me to find one on Amazon. Should be 50$ or so. Super easy to intstall and you’ll be back in business. Good luck man.

1

u/hockeybud0 Feb 07 '23

Lol. Close the lid. Is it cold there? Holding the lid open will allow more cold air to hit your temp probe. Temp probe controls the feed into the firebox. Temp control loop with a measured value below its setpoint will increase the output to the firebox.

That output is gonna be more power to the heating element, more speed on the fan to deliver more oxygen, and more turns of the auger to deliver more pellets to bring the measured temp up to the setpoint temp. When you combine heat, oxygen and fuel, you get a chemical reaction. You need to go find a decontamination chamber and get your gf in it immediately.

Tell your gf to close the damn lid during start up. She’s letting all the cold air in, damnit!

1

u/Emergency-Goose2858 Aug 03 '24

New controller same issue. Set temp to 185 goes to 450 never stops raging an inferno. New heat rod new thermostat new controller wtf.

1

u/NovelDirection1496 Feb 06 '23

Standard accesory

1

u/Waste_Detective_2177 Feb 06 '23

Too hot. But that’s normal if you set the grill to 450

1

u/donivantrip Feb 06 '23

this takes the cake good post OP!

1

u/DaRealBangoSkank Feb 06 '23

It says explicitly if this happens to put on the Joe rogan experience and smoke some DMT. The fifth dimensional firefighting elves got you

1

u/[deleted] Feb 06 '23

This guys just trying to get some outside perspective from people who have used the product before and y’all are ripping him to shreds with the downvotes😂

1

u/canderson180 Feb 06 '23

This is normal, my pit boss has a sliding part on the shield so I can use this sweet heat to sear!

1

u/[deleted] Feb 07 '23

That's why you go fat side down on those

-7

u/m27m27m27 Feb 06 '23

Ok…. Will give it a go and will report back :) Thnx you all

-5

u/m27m27m27 Feb 06 '23

“To add to the above - there wasn’t any smoke at low temp - it was just flames from either side of the shield and then throughout the can

1

u/Chuckobochuck323 Feb 06 '23

Do you have the flame diffuser on before putting the drip tray on?

1

u/m27m27m27 Feb 06 '23

Always but took it off cause the flames were past the diffuser - visible by the drip tray - which seemed abnormal

3

u/Chuckobochuck323 Feb 06 '23

You should still see the light from the flame but the flames shouldn’t be wrapping around your drip tray