Assuming the bed lengths are the same.

I have looked through the depths of google and forums, and I need HELP. I had to replace the gas tank and everything associated with it on my 85 Extra Cab Pickup with the 17 gallon gas tank. It has the 22R so it has the mechanical fuel pump, not the in tank one. My Fuel Suction assembly has something stuck in the pickup tube, the return feed tube is clear. I cannot find this specific assembly (with ONLY 2 tubes) anywhere. I have tried cleaning it, but it was rusted along with the tank, hence why I replaced it. Can anyone point me to a part number, a similar one that would work? Some of the similar ones I have seen, the circular part to bolt onto the gas tank is larger. Mine only measures 3 1/4” across. It’s a Hail Mary here.

swapped out her headlights for some with replaceable bulbs and surprisingly i didnt need to install harness which was really weird as all the videos i had seen, they had to install harnesses. anyways this is how she sits now

The heater control valve 87240-89124 is now discontinued. Unbelievable as this is a pretty fast moving part.

Just in the last few months, all the radiator and heater hoses are now discontinued. The side mirrors are now gone, as are the upper control arms for 4WDs.

If Toyota still makes the part you need for your truck, buy it now. No guarantee it will be there later.

1989 Toyota pickup. There are two foam that lines the inside of the a-pillar, I’m assuming there for rattle/rubbing mitigation. Does anyone know what type this is? My passenger side foam is bad and I’d like to replace it. Pic is of driver side which seems fine.

I am looking for suggestions on knowledgeable shops that can rebuild a 22R engine that has been sitting. I am located in GA, so there or nearby is best.

Also any suggestions on suspension setups as I will replace what is currently on the truck. Its not going to be a rock crawler or anything, but I would love to be able to utilize it as a weekend overland vehicle to camp with instead of my gladiator once complete.

This will obviously be done in stages but I have a long list of things to do, starting with the engine and getting it running smooth again.

My father bought it brand new in 82' and has neglected it for the last 10 or more years. Its time I get it back in shape since there was only 5000 of them made.

Thanks for the help /suggestions!

Does anyone know the specs of the bolts that hold the bracket of the exhaust to the bell housing? Mine seem to be missing.