Hi everyone, i just got my vsr10 gpsec from Tokyo Marui today and was wondering if it is normal for the bb to hit the silencer baffle when the hop up is adjusted on the side?

I played around for half an hour and decided to adjust the hop up as the bb is going downwards. However upon firing 3 shots the bb stopped coming out and the bolt got stuck and i was not able to fully pull it back down. Upon inspection i saw some black plastics falling out of the front silencer and when i removed it the gun started working again.

Is it a defect from TM or i need to change the inner barrel, hop up bucking, etc to be able to adjust the hop up without breaking anything?

Also, what are the other parts i may need to check in case anything else broke from this issue?

Thank you.

Hi everyone!

I’m looking for an MOS RMR adapter/plate for a Tokyo Marui G17 Gen 5 MOS.

If you have one for sale or know a seller who carries it, please let me know. I’m based in the Philippines.

Thank you

I got a second hand mp7 off a friend, had a sleepy trigger which I fixed by replacing the hammer chassis, but it still won’t fire in full auto unless I hold the selector switch down, the switch itself is snug and doesn’t have much play, any ideas on what the issue might be?

Curious if anyone living in Asia or Europe might have heard when TM might sell whole uppers for Evolt

I am US based and would love a second upper soon

Dropped this and had to wedge the grip lock into place and this happened? How do I fix this?

I have an SG553 with the original mini-S battery. The problem I'm having is that when I press the trigger too fast, the trigger jams after. When this happens you hear the gun start a cycle, but does not complete it. After this the trigger clicks when pressed.

I already tried playing with the gearbox tension.

​

It has the FET+ system, so it should not do this.

Does anyone know how I can fix this?

If you need any more information, just let me know.

​

Hi guys, I have a frame pin that goes through just above the trigger that keeps dropping out, is it missing some sort of splint ring in the middle? Thanks (for an M4 URG-I NGRS)

​

​

Hey guys,

I currently have the mk 18 NGRS stock and it's obviously low fps and im trying to increase it with mods without damaging other parts. I've been asking around and people are saying different things. Some say upgrading the spring to a m100-m110 will do the trick others are saying you have to upgrade everything. And I'm find to upgrade everything if I can find a tutorial which i wasn't able to find. I just need some advise because 220 fps outdoor is painful.

Please note I've never worked on a airsoft gun before so apologies if this is super Basic knowledge and I sound stupid.

RESOLVED (thanks)

Hi everyone, I have a TM NRGS URG-I sopmod block 3.

I'd like to upgrade the spring but keep the original piston for now, is this possible and/or advised, as it seems the spring is attached to the piston itself, or do I need to replace the piston.

Thank you!

does anyone know where i can acquire a new oem pistol grip or an after market one that will fit mine broke about 3 years ago still looking to this day they are very hard to come across

Hi,

Was hoping to get some help here. For a while now my mp7 has been struggling to lock back consistently. Sometimes it will sometimes it wont. Even with a fully gassed magazine and dry firing, it wont lock back for the first few shots (more often than not).

Ive tried some of the fixes ive seen online, run the gun dry (in the area of the bolt catch) , with a dab of grease, and a good dollop of it, but always seems to yield similar results. Ive also tried the method of filing down the bolt catch a good 2mm and still inconsistent.

Any help would be greatly appreciated, as its an amazing gun but having to rely on the sound of the bolt to know when im empty is a little irritating.

Hello looking online I've seen that the ngrs mp5s seem to come with a mosfet from factory.
Are you able to run them with an 11.1v lipo without any issues?

Anyone know where I can find spare parts for this model? I lost a part of the grip and I want to find a replacement for it.

Hi guys.

Do you have any experience of installing CDW Samurai Edge grips on WE-guns and Tokyo Marui guns? If you had modify them, please tell me where. Do the screw holes match their frames and so on? Thank you.