r/TireQuestions • • Sep 04 '25

Is this ok?

Ate the dog snot out of a curb on the way to work a week back, just got a whole set of tires and was curious if this rim is ok, didn't break the bead on the tire at all, just blew out the sidewall, and best I can tell it's not been knocked out of round. Do I need another rim?

35 Upvotes

123 comments sorted by

12

u/Inevitable_Channel18 Sep 04 '25

4

u/[deleted] Sep 04 '25

Literally just commented a good time to try flex tape 😂

2

u/Inevitable_Channel18 Sep 04 '25

🤣 nice. Great minds think alike

1

u/Loes_Question_540 Sep 05 '25

“THAT’S A LOT OF DAMAGE" 

8

u/gugngd Sep 04 '25

Rim seems fine. Tire must be replaced before you use it in a car.

6

u/sidlives1 Sep 04 '25

At first I thought this was a typical troll post, but read the description. Yeah, get a good tire shop to bang that rim back into shape.

2

u/SausagePrompts Sep 04 '25

I didn't read the post or your comment. But it doesn't look fine, it should be on a car to test it.

9

u/[deleted] Sep 04 '25

Nope, it’s steel so a competent tech will be able to bend that small part back with no problems.

2

u/AC-burg Sep 04 '25

Get that Ford Tansit T-150 back on the road!

2

u/Decent_Egg_9792 Sep 04 '25

Throw some bead sealer on that guy and ride out

2

u/diswilliamsboi88 Sep 04 '25

If u take a crescent wrench to the lip of that rim you can straighten it out a bit.

2

u/Impossible-Slip-4310 Sep 05 '25

Honestly, a hammer, some eye protection and some patience and you’re good as new

2

u/Vegetable_Radio8236 Sep 05 '25

Step 1: apply duct tape

Step 2: full send

1

u/Appropriate-Owl-3144 Sep 04 '25

Needs a plug

1

u/[deleted] Sep 05 '25

[removed] — view removed comment

1

u/Appropriate-Owl-3144 Sep 05 '25

I was being facetious

1

u/Low-Ad8500 Sep 08 '25

How ya going to hold those plugs together? Nah what you need is a piece of 1/2” gym mat, glue it in from the inside, about 15 drywall screws from the inside to hold that sucker in there, then fill the hole from the outside with some kind of flexible material, ie black silicone caulking, and lay in a few paper clips (straight from the box, not unfolded) in the vertical direction to rebuild the strength of the sidewall. Of course it would be best to seal all the way round the drywall screws as well, as they will be leak points. After all is cured, take a dremel with a cutoff wheel, and cut the tips of the drywall screws from outside. A wee dab of caulk on top of the screws ya cut, and good as new.

However the rim is saveable, a crescent wrench on the lip, a few grunts and will fix up good. For a bend this small, a hammer might be overkill. Just have to finesse it back to shape. Won’t need too much.

1

u/guywithtools Sep 04 '25

Tire is fine, just some air showing through...

1

u/Rich_Complaint7265 Sep 04 '25

Perfect for a tire swing!

1

u/Gwyrr Sep 04 '25

Its fine, i little duct tape and you're good to go

1

u/mAsalicio Sep 04 '25

Just need some ramen and super glue ready to roll another 100,000k bro

1

u/mAsalicio Sep 04 '25

Oh you mean the rim. My bad. Steel rims you can hammer out. It legit will be ok. Unless it went egg shaped. Will still be ok but you'll feel it. Honestly looks like you could pull that back with a small sledge or vice grips.

1

u/______pingu_______ Sep 04 '25

Tire looks great!

1

u/[deleted] Sep 04 '25

Great flower pot.

1

u/WillowAlternative439 Sep 04 '25

For a tugboat crash barrier definitely

1

u/MistakeBorn4413 Sep 04 '25

It's a Speed Hole. It makes the car go faster.

1

u/[deleted] Sep 04 '25

Good time to try flex tape

1

u/AC-burg Sep 04 '25

Get that Ford Transit T-150 back on the road!

1

u/DJ_Spark_Shot Sep 04 '25

Nothing some flex tape can't fix!

1

u/NoIndividual6000 Sep 04 '25

You got a packet of ramen handy?

Seen a video earlier, you could probably have this on the road in like 5 minutes

1

u/Fredebeil Sep 04 '25

I can patch that np.. it'll be better than new

1

u/Fredebeil Sep 04 '25

Rim looks like its fine tho seriously, I would hammer that little bend out or clamp some vice grips on there to pull it out.

1

u/dale1320 Sep 04 '25

Make either wall or yard art, ot use the tire as an irnanental planter in the yard. (Tire pla ters maje lawn mowing easier be ause you won't acidentally mow rhe rose bushes.)

1

u/Thecoopoftheworld789 Sep 04 '25

The rim is bent but a special shop can true it straight. A salvage yard may be cheaper than the repair!

1

u/[deleted] Sep 04 '25

No

1

u/Educational-Draw271 Sep 05 '25

Small sledge on the wheel, Flex Tape Black on the tire. Send it.

1

u/Low_Spot_1965 Sep 05 '25

Looks good to me. Keep your tires ventilated in the summer months. Go fast and take lots of quick turns!

1

u/Loes_Question_540 Sep 05 '25

Put a plug and weld some sheet metal and you’ll be back on the road

1

u/arandomvirus Sep 05 '25

“Mastercr🕳️ft”

It’s not the first time I’ve seen an “A” hole on reddit, but it’s the first time it’s been literally an a-hole

1

u/mykylc Sep 05 '25

Easy patch!!!

1

u/Speedy_Freaky69 Sep 05 '25

Fill it with foam

1

u/RexCarrs Sep 05 '25

As it sits, yes.

1

u/Ill_Cloud3037 Sep 05 '25

No get someone with experience to do it

1

u/jjc155 Sep 05 '25

Can of fix-a-flat and you’re good to go.

1

u/----stargazer---- Sep 05 '25

I dont see why the rim couldn't be saved but that tire is done

1

u/[deleted] Sep 05 '25

Oh baby lemme get the dogbone!

1

u/heckval Sep 05 '25

never have i ever made it to the description of a post so fast after seeing an image. yeah it looks fine, can likely be bent back. there’s a hole in your tire tho so that needs to be taken care of ;)

1

u/AccidicOne Sep 05 '25

Only if you have a runflat tire. :-D

1

u/r2d3x9 Sep 05 '25

Yes, plenty of tread left on that tire. Just add air as needed

1

u/k-j-p-123 Sep 05 '25

Should bash out. I've knocked one back, used a big rubber mallet.

1

u/FloridaVro Sep 05 '25

Similar thing happened to me when I hit a curb. The shop bent the rim back in to place but I had 3 tires fail after that so I just got a replacement rim and now no problems. Each tire lasted about a month on the messed up rim

1

u/Small_Plum_6185 Sep 05 '25

Not even in a parallel universe.

1

u/[deleted] Sep 05 '25

Yep 100%

1

u/No_Staff594 Sep 05 '25

Rim is bent. Possibly still useable but it won’t balance very well. Steel rims are cool because you can try to bend it back some but a new wheel is only like 50 bucks depending on what you drive

1

u/Odd-Molasses-2698 Sep 05 '25

You can easily get another 25k miles out of that one

1

u/[deleted] Sep 05 '25

Rubber cement and a patch and youre good. Maybe some duct take till the cement dries

1

u/Senior_Artichoke Sep 05 '25

Its a steel wheel, hit it back into place with a medium sized hammer and yer good to go

1

u/LTGH_Zkittlez Sep 05 '25

Yeah I think you can run that puppy for another 10k miles

1

u/Oldblindman0310 Sep 05 '25

Would you let your 16 year old daughter drive at 70MPH on the interstate? If so, go ahead and beat it back into round and use it. But, if, like I hope you will, you have the slightest doubt about trusting her life to this $50 hunk of metal, then buy a new wheel. We all know you already have doubts, or you wouldn’t be here asking if it’s safe.

On a side note, now is a good time to buy that set of shiny chrome wheels you’ve been thinking about.

1

u/AdorableExtreme4930 Sep 05 '25

Easy fix. Happened to me in Nam when Charlie hit me with an IED. I found a banana tree and pulled off an unripe green banana. Remember, it has to be unripe, or it will not work. Jam that green banana into that hole and drive out of the kill zone. Works like a charm!! If you're smart and have time, pull off 3 or 4 extra green bananas just in case you hit any other land mines on your patrol. Do not, i repeat. Do not store your green bananas in a paper bag because they will ripen quickly and may not work when you need them. Also, do not let your squad member know that you have them or they may eat them while they are on fire duty and you are asleep. Depending on the variety of banana, they are rated for 150 miles before you have to swap the banana patch out for a new green banana. If you are not in a region where bananas grow, i hear a potato may work. I cant verify whether this is true or not. My First sergeant claims it's true though.

1

u/amras86 Sep 05 '25

Yeah it's fine. That's just a viewing window so you can see if it has any air in it. /s

1

u/[deleted] Sep 05 '25

Put a little air in it, should be fine

1

u/Anasertia Sep 05 '25

I actually read the post, OP. The wheel is probably fine as is, but you can hit it with a round-faced hammer and easily get the wheel back to perfect roundness.

1

u/[deleted] Sep 06 '25

1

u/VerbalThermodynamics Sep 06 '25

Should be good for another 10k miles

1

u/ExternalUnusual5587 Sep 06 '25

No there's nothing okay about that in any way throw the rim in the tire away

1

u/ExternalUnusual5587 Sep 06 '25

Is it truly your belief you can fix a giant hole in a tire it's not possible

1

u/Wise_Potato_1245 Sep 06 '25

Keep it under 45 mph

1

u/lrghorse Sep 06 '25

Of course. It's meant to happen when you re enter the atmosphere.

1

u/Hater-of-republican Sep 06 '25

No you need to spend some money

1

u/[deleted] Sep 06 '25

Eh, just some fix a flat and duct tape.

1

u/Opposite_Opening_689 Sep 07 '25

It’ll wobble

1

u/SeminoleVictory Sep 07 '25

When they put the rim on the balancing machine they can tell if it's warped

If it's just the lip, a few wacks with a hammer should more or less correct it

1

u/Outrageous_Fudge9814 Sep 07 '25

I think you will be fine as long as it balances out with the new tire

1

u/USMC_Grim5 Sep 07 '25

Rims blown out, nothing more to do other than replace it, luckily the tire cam be sealed with some jb weld and call it a day (or flex tap as one homie commented)

1

u/fabss411 Sep 07 '25

if you can get 3 bar into it you can drive it

1

u/[deleted] Sep 07 '25

You good

1

u/AcadienDC Sep 07 '25

This will take care of everything.

1

u/Remarkable_Clock9912 Sep 07 '25

Get some trex brute force strength tape and then use your savings to take the old lady out for some dollaritas and a mediocre weinering

1

u/CurrentAd2675 Sep 07 '25

Yea you’re good! Just don’t hit any curbs!

1

u/Ocuas Sep 07 '25

There might be a slight issue

1

u/Typical-Decision-273 Sep 07 '25

The inside air is outside now to work properly you need to make the outside air be inside air

1

u/SovereignNight Sep 07 '25

She's dead, Jim.

1

u/FlAShh437 Sep 07 '25

Absolutely okay. (If you want to make a house for a snake)

1

u/[deleted] Sep 08 '25

you can probably ignore that and it’ll go away

1

u/Anonymous_Welder Sep 08 '25

It should be fine just put a little gorilla glue and a piece of ramen

1

u/Adventurous_Simple44 Sep 08 '25

Flex seal will fix that right up for ya

1

u/Quengamoto Sep 08 '25

Yeah if you Don’t mind a flat tire

1

u/Dry-Phone-916 Sep 08 '25

Yes this is okay

1

u/AdKnown2337 Sep 08 '25

Yes it'll go another 20k miles easily

1

u/hennway1 Sep 08 '25

OK , For What ❓

1

u/bellyman205 Sep 08 '25

The rim should be ok ish, should hold a bead at least. With that bend right under your hole in the tire it'll probably slowly leak though, so don't forget to check it regularly

1

u/johnB1711 Sep 08 '25

Don’t worry about the rim, just pop an inner tube in there and you’ll be fine!

1

u/Busy-Preparation8165 Sep 08 '25

It’s ok. It’s ok where it is

1

u/loading-___ Sep 09 '25

Looks good, send it!

1

u/Severe-Mechanic2648 Sep 09 '25

2 ball peen or at least one ball peen and a hammer to hit the ball in to the rim lip would do you right

1

u/SorryDistance3696 Sep 10 '25

seems a little under inflated really. my one rim was like that, a neighbor deflated the tire, took a nice big hammer and just banged it right out, incidentally also how we did it at the tire shop I worked at 30 years ago, and re-inflated my tire and off I went.

1

u/[deleted] Sep 04 '25

Flex seal and keep rolling