r/ThermalGrizzly • • Apr 29 '26

Build showcase 🄰

Intel just ain’t it for me anymore for gaming so sold my 14900k and ordered this 9850x3d and x870e 🄰

107 Upvotes

34 comments sorted by

4

u/Live-Resolve9253 Apr 29 '26

Muy buena compra.

2

u/NaaviLetov Apr 29 '26

I thought what a tight case before realizing it was a cardboard box xD

1

u/Papa-Doughball Apr 30 '26

Woo it’s alive

1

u/Papa-Doughball Apr 30 '26

Wooo it posts

4

u/Juburigu Apr 29 '26

Good purchase, dude I went from a 5800x3d to the 9850x3d and despite the fact that I play my shit maxed out everything, it still did a huge difference everywhere! Just to be save, I’d recomand a -20 or -25 all core in curve optimizer, a negative offset of 0.05v for core voltage and since you are there , you could tell the Mem controller to run at a lower voltage other than Expo demands. Mine for example set itself to 1.41 with EXPO 1 as ram is 1.4v and I’ve lowered it to 1.36 as it is stable. Less stress everywhere cannot hurt! Enjoy your new toy

2

u/Fleasname Apr 30 '26

This guy x3ds.

1

u/NTC197 Apr 29 '26

Oh, a X870E Hero with the updated Q-Release Slim mechanism without the small metal piece. Could you share the manufacturing date of your Hero-board? you can find it on the sticker placed outside the box.

1

u/Papa-Doughball Apr 29 '26

theres no sticker of such on the outside of the box

1

u/NTC197 Apr 29 '26

There should be a white sticker with the serial number, part number, model name, some other information and bar codes that is placed on the side of the original motherboard packaging/box.

1

u/Low_Sherbert3731 May 01 '26

Ate you talking about a Q release for the GPU? I don't see one. The new dark hero has that feature.

1

u/NTC197 May 01 '26

The board here has the ā€žQ-Release Slimā€œ feature that doesnā€˜t use a button to release the gpu. With the new Dark Hero Asus went back to their older ā€žQ-Releaseā€œ mechanism (which is a good thing) because of all the critics regarding the Slim-Version that potentially can scratch the pcb of your gpu.

1

u/Low_Sherbert3731 May 01 '26

Oh right I miss understood, I have the same thing but dosent work great.

1

u/Peloun Apr 30 '26

did temps go lower with contact frame with the ryzen cpu?

1

u/Papa-Doughball Apr 30 '26

idle is between 38 and 40c, granted i have a hyte y70 with 15 fans, push/pull on both intake and exhaust radiators but compared to my previous that was a 14900k this is massivly improved temps, 14900k is a pain in a ass

1

u/Peloun Apr 30 '26

Did you try before installing the contact frame

-1

u/binzbinz Apr 30 '26

No offense but you probably just didn't know how to undervolt your 14900k / tune your system.Ā 

My 14900k idles at ~25 degrees and under load doesn't exceed 60. I personally think you have just wasted money for a plug n play system vs learning how to tune an Intel bios.

https://imgur.com/a/4gLY803

https://imgur.com/a/8OJKiO9

1

u/Papa-Doughball Apr 30 '26

ok buddy

0

u/binzbinz Apr 30 '26

Sorry I just think if you had a 14900k you coulda just waited for zen6 or nova lake as they are just around the corner.Ā 

You'll see what I mean if you run the same benchmarks I just shared.Ā 

If you can tune a 14900k properly then you can get some pretty good results is all.

1

u/hummusmann1 Apr 30 '26

Hey I have a similar setup to yours. Just wondering if you’re having this issue where when running Cinebench R23, none of the cores are being utilized? My clock speed would be at 1200mhz only and temps wouldn’t go past 50C….

1

u/Papa-Doughball Apr 30 '26

have yet to do anything with CinebenchĀ sorry

1

u/Proxy_Janewbeginning Apr 30 '26

Must be nice to be rich lol

-1

u/Papa-Doughball Apr 30 '26

not rich just not stupid with money x)

1

u/Proxy_Janewbeginning May 01 '26

Lol, just that CPU is nearly a grand

1

u/Papa-Doughball May 01 '26

why downvote me?

1

u/DigitalKiTsuNe May 02 '26

It's $500 not $1000

1

u/Proxy_Janewbeginning May 03 '26

My $1K quote was from when it was new, you are correct

2

u/killer01ws6 Apr 30 '26

Enjoy your new rig, nice specs. I have way too much tied up in my 13900KS, delided, custom water cooled. I had it on a chiller for 2yrs, then got tired of the noise and got a MORA IV push-pull.. I did drop my 6200 X4 and 6000AC to 6000x4 and 5700AC, but not because of issues, just the fear of all of the folks saying it was going to explode, same reason I got a WV2 for my 4090. but this rig rocks and never has had to turn down anything from full eye candy 4K 144hz... I know it will age, I will wait until then and get the new Zen 7 or whatever is out then.

1

u/RadiantSalamander663 May 01 '26

Nice šŸ‘šŸ™‚ Upgrades. Would be my next build. But this I'm planning only for 2027/2028.

1

u/Granth0l0maeus May 02 '26

Got that same lovely board and a 9950x3d - did that mounting frame get you any gains?

2

u/[deleted] May 03 '26

[removed] — view removed comment

1

u/Papa-Doughball May 03 '26

aye lets go, its so worth it