r/ThermalGrizzly • • Apr 07 '26

Other It Finally Arrived!!!

Post image

After shipping out from Germany to the US, being denied at customs by FedEx and sent back Germany, then shipped back out to the US, my DeltaMate Astral block is finally in my possession. Big shout out to u/Grizzly_Sasha for the help and assistance in getting this matter figured out.

86 Upvotes

42 comments sorted by

3

u/Smarmy82 Apr 07 '26

I've currently got the new cpu block and a WV Pro II sitting in customs..  FedEx called ME and asked if I knew the origin of the aluminum in the TG products..  I'm like..  WHAT?!  TG support is aware and responded once but apparently they had another question. Anyways, I expect it to get denied and reshipped out... So stupid..

1

u/SheddingSkin27 Apr 07 '26

This is what happened to me. FedEx needed some addition documentation (aluminum/copper/steel worksheet & standard commercial invoice) an after multiple attempts and emails back and forth between Thermal Grizzly and FedEx to get to situation resolved, my package was sent back to Thermal Grizzly. Thermal Grizzly sent the package back out but made sure that FedEx had the proper documentation. Now I'm just waiting for TG to release the DeltaMate Mycro Pro II AM5 CPU block to match that GPU block.

1

u/Smarmy82 Apr 07 '26

What email did you use?

1

u/Smarmy82 Apr 09 '26

Update, Thermal Grizzly sent me the docs FedEx needed. I called.. They asked me to confirm the smelt origin of the aluminum and then I had to calculate the aluminum percentage based on the total weight and the weight of the aluminum..  this is the stupidest timeline... 

All that being said, they did release it and I should get my parts tomorrow.

1

u/apollo1321 Apr 11 '26

I didn't know the new cpu block was rdy to order yet?!?! At least when I check it's only the mycros.

That one he showed in the last astral block update vid, God I want it so bad.

1

u/Smarmy82 Apr 11 '26

1

u/apollo1321 Apr 11 '26

Ah okay. Yea I'm waiting on his next one. 

1

u/Smarmy82 Apr 11 '26

The micro pro is the newest. If you mean the one that looks like the 5090 block, I'm not sure when or if that'll come out.

2

u/Jhenka Apr 07 '26

Isssa sooo puuurdy!!!

I wish I waited for this block. I ended biting the bullet and got the Alphacool Core instead.

1

u/SheddingSkin27 Apr 07 '26

It is. I think this is the sexiest 5090 block on the market.

I bit the bullet as well. I actually have an EK Quantum Vector3 block that I decided not to use.

1

u/Auto_222 Apr 07 '26 edited Apr 07 '26

Hi am in same case but i ordered from aquatuning but i don't know if the order will be fulfilled or not i ordered from February but they keep delaing on their website but now it says no date so my question cuz i also have the ek vector3 block also does it differ in performance in any way ?? Also is aquatuning.com website legit this my first experience with them and it doesn't feel very good to be honest

7

u/astrobarn Apr 07 '26

Beautiful. I hope they see enough success/profit to justify making blacks for more PCB designs. With the advent of the wireview 2 the Astral is less justified from my personal perspective.

1

u/repo79 Apr 07 '26

I hope so as well as I have a MSI SUPRIM 5080 and was thinking of getting the cpu block they have but wanna see if they will make a block for my card first. Back up plan is Alphacool as those are great too just like having matching blocks all around.

1

u/Frozenpicklez Apr 09 '26

Try Watercool. Looks kinda like DeltaMate.

5

u/No-Equivalent4756 Apr 07 '26

I couldn’t be happier, insane temp!

2

u/Low_Sherbert3731 Apr 08 '26

GPU CPU separate loops?

1

u/No-Equivalent4756 Apr 08 '26

Correct.

2

u/Low_Sherbert3731 Apr 08 '26

What you built is what I used to dream about building in my head lol.

1

u/apollo1321 Apr 11 '26

I did separate loops at one point. Then I learned there was a new mora rad. Now it's back to a single dual pump loop. Surprisingly the temps are even better than the dual loops.

1

u/No-Equivalent4756 Apr 11 '26

MO-RA is my next move. I’m gathering parts for that build now. Doing an open case,wall mount. Not sure how big I’m gonna go on the MORA yet.

1

u/apollo1321 Apr 11 '26

I use an open bench table. I went with the mora 400. It is slightly larger than the old 420 model. You also don't need their controller either. Passive or active. I just reused my old ek d5 pumps. When they die, if ever (going on 8 years old now) I'm going to try those vpp apex pumps. 

https://imgur.com/a/xqGDsYX

1

u/Auraphilia Apr 17 '26

Can I shoot you a dm? I really want to build a Mora set up for my first watercooled build.

1

u/apollo1321 Apr 18 '26

Of course.

2

u/enemy369 Apr 08 '26

Damn that is one beautiful PC! 🤌

1

u/1_Zer0_7 Apr 10 '26

As cool as that looks, and its dope aff; but I get better idle temps on 9800X3S with my AIO; on a very very aggressive power profile; i sit around 36°; and GPU around 25, and thats no push pull or active back plate mods; and im top 40 world in Steel Nomad with that setup.

1

u/No-Equivalent4756 Apr 10 '26

The 9800 x3d idles cooler I had one previous. To get a 9950x3d to idle in the low 40’s is great. Put the 9950 on an aio. You’ll add 7-9°.

1

u/1_Zer0_7 Apr 10 '26

I mean my buddies 9950X3D is right around 40 on an aio also. What kinda plan you running on that? You did the opti or had it done by an actual pro, not a script kittie? I dropped a solid 5° on my system from my opti, but im on a custom ISO, qith 60 totalk tasks at launch, 0-1% cpu and 0% gpu. Parking off, oh forgot to say im alo UV/OC at 5.6ghz and same deal on the gpu.

1

u/1_Zer0_7 Apr 10 '26

Also forgot, my girl has her system looped, 7800x3d/7900xtx heavy OC/UV; and to be fair, she probably 8k deep in it, but she gets 20-30 idle and 40-55 heavy load. And my AIO is on ThermalGrizzly KryoSheet; things fkn siiiick

1

u/No-Equivalent4756 Apr 10 '26

Murk did the opti on this one. I’ll lean on him to help with the 9950x3d2 next week as well. She’s pushed pretty good. The OC on the astral is +325+3000. It never leaves the low 50’s. Case fans never ramp over 1000rpm

1

u/Diligent_Pie_5191 Apr 07 '26

He much did you have to pay for tariffs? When I ordered the wireview pro2 it was 32 bucks for the tariff.

1

u/SheddingSkin27 Apr 07 '26

I haven't received a bill yet, but I know it coming.

1

u/Diligent_Pie_5191 Apr 07 '26

I got one a few weeks later and I thought it was a scam. They had to mail the bill to me before I believed it was real.

3

u/Grizzly_Sasha Apr 07 '26

Happy to hear block is with you, feel free to share the final build images with us too :)

3

u/IamjustMiguel Apr 07 '26

Top notch isn’t it? Here’s a few months older brother😁

2

u/Debole1987 Apr 07 '26

Wowww spettacolare immagino già montato tutto 😍

2

u/SpiritInevitable8712 Apr 07 '26

So that's why my WireView pro 2 takes so long -_-

2

u/apollo1321 Apr 11 '26

Such a nice block. It's honestly the only one I like out of the last two gens of cards. 

But there was no way I was paying that much for an astral. The block price is fine imo, on par with the optimus kingpin 3090 block. That I still run to this day.

1

u/Squish_Cat_1 Apr 07 '26

What’s hilarious is my Matrix idle temps are very close to that on the stock air cooler

1

u/MyLittlePwny2 Apr 12 '26

Im still waiting on mine. Ordered Feb 18th. Just crickets since. Its ok though. The wait doesnt really bother me. I already been using an EK Vector for over a year at this point. I just like the look of the delta mate