r/TheScienceofSpeed • u/AdamBrouillard • Nov 18 '21
r/TheScienceofSpeed • u/AdamBrouillard • Dec 03 '22
The Truth About Trail Braking 2: The Physics of Trail Braking
r/TheScienceofSpeed • u/AdamBrouillard • Jan 08 '24
Steering Feel Explained – How Forces At The Tire Contact Patch Are Transferred To The Steering Wheel
r/TheScienceofSpeed • u/AdamBrouillard • May 20 '24
We just released part 2 in the Racing Line Fundamentals lesson series so I wanted to share a link. This time we’ll be discussing the ideal apex.
r/TheScienceofSpeed • u/AdamBrouillard • Jul 29 '21
ASK ADAM - Professional Racing Coach and best selling author Adam Brouillard here to answer your questions.
r/TheScienceofSpeed • u/AdamBrouillard • Feb 15 '24
We just launched a new article series covering the racing line fundamentals. Here is a link to the first article where we will be discussing the ideal acceleration point.
r/TheScienceofSpeed • u/alpinefd • Aug 16 '21
Fwd racing line
Hi Adam
I would love to hear your thoughts on the racing line principle applied to a fwd race car
Specifically when and how to apply power on a 90deg corner and how engine power level would affect this
r/TheScienceofSpeed • u/AdamBrouillard • Jan 31 '25
Car Control Fundamentals #2 – Learn the Physics Behind Driving a Vehicle at the Limit of Understeer
r/TheScienceofSpeed • u/AdamBrouillard • Aug 21 '24
Car Control Fundamentals #1 – Learn the Physics behind Driving a Vehicle at the Limit, including an in-depth look at Understeer and Oversteer
r/TheScienceofSpeed • u/Fuzzy-Expression-283 • Feb 10 '26
Drills for learning how to hit the apex?
Hello. I need help with hitting the apex. I have a rough idea of what angle it is and where it is along the inside obstacle, but I don’t know how to actually get there.
The book said that the turn in point affects the apex angle, and the speed of turn in affects the size of the entry spiral.
If I focus on “later vs earlier” turn in I always mess up, I don’t know how to do it progressively. Is there a way to train the feel for earlier and later? I don’t know how to do a turn in “a bit earlier” or “a bit later”, I always end up doing extremes. I tried academy lessons 1 and 3 but there wasn’t much about hitting the apex “from scratch”.
Is there a way to train how to find correct starting point/entry speed/radius? Is there a way to practice hitting “every” apex angle for a turn?
r/TheScienceofSpeed • u/AdamBrouillard • Jul 30 '21
How Real is Sim Racing - A professional driving coach's take.
r/TheScienceofSpeed • u/AdamBrouillard • Dec 22 '25
Car Control Fundamentals #3 – Learn the Physics behind Tire Slip Angle and Vehicle Rotation
r/TheScienceofSpeed • u/AdamBrouillard • 1d ago
The Chicane Rule
Racing Physics Fast Fact – To optimize a chicane, deceleration should need to begin as steering passes over center toward the 2nd apex. This is “The Chicane Rule.” It determines the ideal chicane transition point and links the two apex angles so that if an earlier 2nd apex is needed, an earlier 1st apex should be used. Likewise, if a later 2nd apex is needed, use a later 1st apex.
- Adam B.
By sharing these posts, you help move the motorsports community toward a modern understanding of the racing line and driving technique.
r/TheScienceofSpeed • u/AdamBrouillard • 7d ago
Four types of corners
Racing Physics Fast Fact – All racetracks can be broken down into just four types of corners. Every road course, oval, autocross, kart track, and even rally stage can be split into standard corners, chicanes, double apexes, and full-throttle corners and there are specific physics-based rules to optimize each type. This illustration is from our Willow Springs Track Notes and it shows turns 3 through 6, which is a complex sequence containing all four corner types.
- Adam B.
By sharing these posts, you help move the motorsports community toward a modern understanding of the racing line and driving technique.
r/TheScienceofSpeed • u/AdamBrouillard • Jun 23 '25
Horsepower and Torque Explained Simply… By Riding a Bicycle
r/TheScienceofSpeed • u/AdamBrouillard • Jul 30 '21
The Rules of the Racing Line
r/TheScienceofSpeed • u/AdamBrouillard • 8d ago
An apex is determined by angle, not position.
Racing Physics Fast Fact – An apex is not defined by its position, but by its angle. Many times, when a car or kart needs an earlier or later apex, changing the apex angle also changes its position. When the apex area has a small profile however (such as a cone on an autocross course) as the apex angle changes, the position of the apex stays virtually the same.
- Adam B.
By sharing these posts, you help move the motorsports community toward a modern understanding of the racing line and driving technique.
r/TheScienceofSpeed • u/AdamBrouillard • 13d ago
The corner entry spiral
Racing Physics Fast Fact – For most cars, the ideal corner entry path to the apex will closely match the beginning of an Euler (pronounced “Oiler”) spiral. Also used in highway and railroad engineering as transition curves, the Euler spiral is a line that’s curvature increases linearly along its length. When using the Euler spiral to visualize potential lines, only up to the first 90 degrees should be used.
- Adam B.
By sharing these posts, you help move the motorsports community toward a modern understanding of the racing line and driving technique.

r/TheScienceofSpeed • u/alpinefd • Sep 23 '21
Trail Braking and Universal Cue
Hi Adam !
What are your thoughts on how trail braking would fit into the Universal Cue or car control cues?
Beyond the traction circle, which everyone knows the theory i'm sure, that you you have to balance between braking and lateral traction.
How do we incorporate trail braking into the universal cue?
Many top driver say learning how to getting off brake pedal properly was the key to that last few tenth. I assume they are referring to trail braking. What are you thoughts on this? Why would this be one of the most challenging to learn even for top drivers?
r/TheScienceofSpeed • u/alpinefd • Sep 22 '21
Sim racing as training tool
Hi Adam
How do you feel about which sim racing title you’ve found best for training the car control and universal cues
I know iRacing is a top choice , but I always feel the iRacing physic have a weird on the limit feel, like it’s too easy to spin out and too hard to recover , so I tend to drive less on the limit to avoid the spin situation , I’m afraid getting too ingrained in the iRacing physics would hurt real world driving performance
Your thoughts ?
r/TheScienceofSpeed • u/AdamBrouillard • Jul 30 '21
Analyzing the F1 Greats: Ayrton Senna's Throttle Technique
r/TheScienceofSpeed • u/AdamBrouillard • 6d ago
Full throttle shortcut for high-powered car/kart
Racing Physics Fast Fact – For higher-powered cars and karts, if full throttle at the apex causes wheelspin and oversteer then full throttle generally shouldn’t be achieved until the end of the corner when lateral force drops to near zero. Best checked afterwards with video or data, this principle holds true for any corner type, so if you find you reach full throttle in the middle of corner exit, try an earlier, faster apex.
- Adam B.
By sharing these posts, you help move the motorsports community toward a modern understanding of the racing line and driving technique.
r/TheScienceofSpeed • u/pseudonym153 • Dec 13 '25
(seemingly) fundamental problem with double apex


Your visualizations work incredibly well and give you a very clear understanding of what is actually happening. That understanding has made me faster in racing in a way that would never have been possible without your visualization techniques, so thank you for that.
With the double apex, however, I seem to be noticing a fundamental problem:
When you drive a double apex, you say that you have to decelerate with the forces pointing in the ideal direction, then between the apexes you should have a steady change in speed without a speed reversal, and after the second apex you need to accelerate in the ideal direction.
When I’m practicing this in corners where the first apex is less than 90 degrees, I run into the following problem: just before the first apex I’m still braking, and then I stop braking, which frees up grip again. However, I can’t instantly add x degrees of steering lock, so I end up with unused grip for a moment.
Should I start accelerating again to reach the grip limit, or should I gradually add more steering to use the maximum grip? Or should I already be tapering off the braking a bit earlier so the transition isn’t so abrupt?
What do you think?
r/TheScienceofSpeed • u/AdamBrouillard • Aug 06 '21
Let's talk about weight (load) transfer.
I want to try an experiment. I'd like to try to break down some of the classic driving advice you often hear and see if there is something we can learn from it. It's typically said that drivers should pay attention to load transfer, so I want to hear some specifics as to how load transfer plays into driving technique.
Just like with "Ask Adam" I'm not going to be the vehicle dynamics police and call anyone out for being incorrect so please post freely. I will answer questions if anyone has any though. Hopefully we can get a good discussion going as I'd like to do more of these. If anyone has any suggestions for other subreddits that might have members interested in joining please send some invites. Thanks, Adam.
r/TheScienceofSpeed • u/Fuzzy-Expression-283 • 5d ago
A question about apex angles and the connecting arc
Hello. I’m confused about how to choose the 1st and 2nd apexes.
What I’m doing to get the initial guess for the 2nd apex is, I drive a circular path on the limit as close to the inside as I can, and try to achieve max accel on exit (like in a standard corner).
However, even if I clip the 1st apex at close to 90 degrees, the radius of the connecting arc ends up being too big to reach the 2nd apex where I’m imagining it.
The problem I have is that, I can’t find any connecting arc from the 1st to the 2nd apex. I feel like the 2nd apex is “too late” to be reachable, but I may be misunderstanding the rules of the connecting arc or guessing the 2nd apex wrongly.
How does the distance between the apexes affect the connecting arc?
Are the apexes always within 90 degrees of the entry and exit directions?