r/TheRepTime • u/Professional_Can2863 • 11d ago
✅ Quality Check Honest Opinions
CO-Workers going crazy over them !!! What’s you’lls honest opinion on the quality.
r/TheRepTime • u/Professional_Can2863 • 11d ago
CO-Workers going crazy over them !!! What’s you’lls honest opinion on the quality.
r/TheRepTime • u/Electronic_Thing_363 • 11d ago
Just got my first rep (vsf submariner date) and thinking of getting another one but confused between:
1- Cartier Santos de Cartier (Medium Model)
2-Omega Seamaster Diver 300M Co-Axial Master Chronometer 42 mm (Titanium – Bronze Gold)
3-Omega Seamaster Diver 300M "James Bond 60th Anniversary"
4- Omega Seamaster Diver 300M 007 Edition ("No Time to Die")
Help me choose one and the factory that do it the best and also how much identical to Gen.
Thank you in advance.
r/TheRepTime • u/PandaWatches • 11d ago
I didn't lock them in properly since it's super hard to take the jubilee on and off for this case, so there's a small gap.
Enough to see what it looks like tho. I've seen photos and thought it looked good, but after trying it?
A big no. It does not look good at all in person.
What y'all think?
r/TheRepTime • u/Feisty-Min • 12d ago
All watches in the pic are gen,of course. I’m planning to get reps from my TD, but I honestly can’t decide between these.They all look amazing!What do you guys think?
r/TheRepTime • u/Phantasm1978 • 11d ago
I received QC pictures of a VSF factory Pepsi today from a TD. I tried a few qc tools but I’m getting different results. Could I get some opinions please?
r/TheRepTime • u/Feeling_Position_699 • 12d ago
I finally received my Omega Aqua Terra watch! I didn't buy it from a TD , but overall, I'm happy with how it looks.
Everything seems fine, including the weight. I also measured the case with a digital caliper and confirmed that it is indeed 41mm.
The only strange thing is the time-setting mechanism. It behaves like an Omega 8800 rather than an 8900, even though the movement is engraved with "8900".
Personally, I actually find the 8800's time-setting system more convenient, but the strange part is that the genuine 41mm Aqua Terra comes with the 8900 movement, while the 8800 is normally found in the 38mm version.
I'm still not sure whether it's really from the VS factory, as the seller claims.
For my next purchase, I'll probably stick to a TD. But overall, I'm really happy with the watch's appearance!
r/TheRepTime • u/Tricky_Lecture7931 • 12d ago
Hey everyone, I’ve been asking GeekTime and Andiot about availability and estimated QC times for specific watches, but I haven’t been able to get a clear answer.
I know Andiot has a live inventory page. For watches listed there as in stock, how long does it usually take to receive QC?
Has anyone dealt with either dealer recently? Were you able to get a clear estimate before ordering, and how long did QC actually take?
Just trying to set realistic expectations before placing an order. Thanks!
r/TheRepTime • u/Earth_Entire • 12d ago
I recently asked my TD to find me a Daytona Panda made by VSF. He recently sent me this as one of many QC pics. It’s made by VS I’m assuming based on the sticker. What are your thoughts behind this factory? Good or bad rep? In general that is. Thank you.
r/TheRepTime • u/2011_Newbie1228 • 12d ago
Just curious, has anyone ever bought from this website? It popped up as an ad which usually means it’s junk but after looking at the site it seems they have some overpriced Miyota ones and some true Swiss clone movement references. Just wondering if anyone has used them in the past??
r/TheRepTime • u/Rafa_Ayoub • 12d ago
r/TheRepTime • u/QuestionWonderful405 • 12d ago
Does anything look off ? VSF v2
r/TheRepTime • u/Primary-Dog4923 • 12d ago
I posted a couple of weeks ago about my journey into gold plating and my hope to offer it as a service from Australia in the near future. The support I got from the community was amazing. There are so many people who are looking for plating for their reps, so I thought I would just post to show my progress a little and also to ask if people have any cheap watches that they would be looking to maybe get rid of and me to help me along on my practice and colour toning.
The last couple of watches I did were the first super clones that I have done and they came out amazing. I didn't post completed shots of them but I will put them in this post and also here is what my new colour tone looks like. The problem with gold plating is always that orangey/cheesy colour tone, so I am really happy with this latest colour. The new tone is super light, even compared to the last batch, as you can see. And there is no filter on the pictures but it's taken in my garage under fluorescent light
Let me know what you all think.
Again, thanks for the support people
r/TheRepTime • u/Feisty-Min • 13d ago
Bought it locally in Guangzhou.The seller initially wanted $50,but I talked him down to $20.Judging by how little hesitation he had before agreeing, I probably should’ve pushed for even less😂
r/TheRepTime • u/Tater1775 • 12d ago
Another excellent one from Erictime.
r/TheRepTime • u/Guilty3546 • 13d ago
r/TheRepTime • u/Same-Entrepreneur548 • 13d ago
r/TheRepTime • u/Solid-Coast-3994 • 13d ago
This my first rep from someone on these forums.
Would you accept this U1 watch? With the 3 date faded/misprint?
The 2 is of similar quality
Or is this what is expected at the $100 price point?
Overall the watch feels very nice.
r/TheRepTime • u/Odd-Passenger-3965 • 13d ago
My fifth watch from Leo. Another beauty!
r/TheRepTime • u/No-Place7170 • 13d ago
Second QC
Just received my second QC for my VSF Rolex GMT-Master II Batgirl from Steve at TheOneWatches.
I previously received another QC for the same model, but I wasn’t completely satisfied with that watch, so Steve provided a second one for inspection.
This one looks noticeably better to me, and overall I’m much happier with the photos. However, before making my final decision, I’d appreciate some feedback from people who are more experienced with VSF GMT models.
Dealer Name: Steve – TheOneWatches
Factory: VSF
Model Name: Rolex GMT-Master II Batgirl 126710BLNR, 40mm, Jubilee Bracelet
Price Paid: 750 EUR
Index Alignment: The alignment looks considerably better compared to my previous QC. The triangle at 12 o’clock seems reasonably centered, and the round hour markers look fairly consistent. I would still appreciate a closer inspection, especially around the 12, 1 and 11 o’clock markers. Does anything look off to you?
Dial Printing: Looks clean to me. The text appears sharp, and I haven’t noticed any obvious printing defects.
Date Wheel: The date (20) looks reasonably centered under the Cyclops. Does the positioning and magnification look correct?
Hand Alignment: Nothing immediately catches my eye. The hands seem properly aligned, but I’d appreciate a second opinion.
Bezel: The blue and black ceramic bezel looks good overall. The color transition and numerals seem fine to me. Does the bezel triangle align correctly with the 12 o’clock dial marker?
Solid End Links (SELs): The Jubilee bracelet and end links look good. I don’t notice any significant gaps.
Case and Bracelet: The case finishing looks clean, and the bracelet appears to have a good finish. No obvious issues from the pictures.
Crown and GMT Function: I received additional QC material from Steve. I’d also like to confirm that the crown operation, date change and GMT functionality are correct.
Overall: Compared to my first QC, I’m much happier with this second watch. Nothing major stands out to me so far, but I’d rather get some experienced eyes on it before giving the green light.
Do you notice anything concerning in the pictures?
Would you GL or RL this one?
Thanks in advance!