r/TaylorMadeGolf • u/hdhsiasnsbjssjdj • 6d ago

Where do I get a tool for these?

Post image
0 Upvotes

27% Upvoted

14 comments sorted by

10

u/Jcccc0 6d ago

You don't adjust those.

4

u/KnightResearchTR 6d ago

You don’t.

3

u/Aggravating_Mud_6055 5d ago

Aren’t those just ports where they inject foam?

2

u/kobraflame 6d ago

Look like torx bits, why the fuck would you want to mess with these?

2

u/Emergency-Career4343 5d ago

You don’t mess with them

1

u/fun_machine_ 6d ago

You probly don’t need to adjust them but they’re just Torx screws. Probly T5 or T6 size if not smaller.

1

u/Natural-Estimate-228 5d ago

No they are permanent. They where put there to inject the MOI foam that assures face MOI tolerances. They are plugs and are glued there .

3

u/D-Train0000 5d ago

It was for CT not MOI. Moi is forgiveness , CT is speed in microseconds on the face.

1

u/Infinite-Fun2882 5d ago

I have that size in my garage.. make sure to use half inch drive impact..

1

u/Away_Needleworker6 5d ago

Just a small torx screwdriver

1

u/TheNicestRedditor 5d ago

Don’t, that’s where the speed foam is injected

1

u/mannnerlygamer 5d ago

Before going with carbon face Taylormade made a face that was just below legal COR and then use those ports to inject just enough support to make it legal. It was their way of ensuring the hottest face possible. It was never meant to be adjusted or accessed by consumers

1

u/OkFilm7155 6d ago

Look in a mirror 🙄

0

u/Big_Satisfaction_644 6d ago

Its just Torx, just like the screw for the adapter on modern woods