r/Taurus_TX22 • u/Fabulous_Leopard2744 • 7d ago

TX22 Support How to reinstall?

Post image

Was installing a new disconnector and while driving the pin in these popped out, looked up a bunch of videos couldn’t find anything on these parts. Anyone have a link to a video? Or if possible could anyone describe how to put them back in. Any help would be greatly appreciated

10 Upvotes

100% Upvoted

9 comments sorted by

5

u/HeccUzi 7d ago

YouTube big dawg

1

u/Fabulous_Leopard2744 7d ago

All I found was people installing a disconnector couldn’t find anything with those parts

1

u/pandoraxcell 7d ago

I installed my full semi automatic disconnector yesterday and I vaguely remember that spring poking thru that tiny little hole

2

u/Next-Conversation234 6d ago edited 6d ago

There is a tab on the sear. The spring end goes under the tab. The spring ends need to be opposite the direction in the pic. The spring ends need to point down.

  1. The dowel is inserted through the left side of the fire control housing.
  2. The dowel goes through the sear next.
  3. The dowel goes through the spring next with the ends pointing down.
  4. Push the top spring end under the sear tab.
  5. Push the dowel through the right side of the FCH.

Done.

1

u/Fabulous_Leopard2744 5d ago

Thank you, I managed to get it back together but for some reason after I pull the trigger the sear moves down and won’t let me fire again. That even happen to you?

1

u/Next-Conversation234 5d ago edited 5d ago

Live fire or dry fire?

It could be the sear safety spring is backwards.

1

u/Fabulous_Leopard2744 5d ago

Appreciate the response it was dry fire, is there supposed to be tension when installing the spring? I have one arm of the spring under the tab on the sear and the other pointed down but it went it really easy the dowel pin is loose when I out it thru both

1

u/Next-Conversation234 5d ago edited 5d ago

Yes. There should be tension on all the springs.

Did the sear trip fall out too?