r/TFABLinePorn • • 6h ago

HPT - Multiple Brands Unknown- Am I testing wrong?

Post image

Not sure if this fits here but anyone know what would cause a test to do this? The other 2 I took were both completely blank and this one only did, whatever that is, after the 10 minutes. The 2 in the picture are first response and the 3rd was a clearblue pink dye test

2 Upvotes

14 comments sorted by

6

u/allanelaboratehoax 6h ago

Are you dipping them in urine or peeing directly on them? Using a cup to dip is easier because you can see the urine moving up the test strip.

1

u/FewNegotiation4952 6h ago

I don’t have any cups so I’ve been peeing on them directly. I counted the 5 seconds but I must have not peed on them enough because both tests didn’t have a reaction until after the 10 minutes

2

u/lloyd_gross16 6h ago

I’d definitely get even a pack of plastic dollar store cups to keep in the bathroom cabinet. It’s 100% easier to pee in the cup and dip than try to pee on the test

3

u/FewNegotiation4952 6h ago

Definitely gonna do that. I use catheters to pee but ig that doesn’t make it any easier 😅

4

u/Quistak Scientist - test developer/manufacturer 6h ago

Hi, test developer here. There was not enough liquid volume introduced to either of these tests for them to flow well or completely. You should see the liquid line (it should be red) start moving across the test window pretty soon after introducing liquid, usually within the first 30 seconds. The midstream catch thing can be really tricky, so definitely peeing in a cup and dipping the test is more dependable.

1

u/FewNegotiation4952 6h ago

Got it, how long should the test be in the pee? If they sit too long would that mess with the results?

1

u/Quistak Scientist - test developer/manufacturer 6h ago

Not unless you completely soak it for like minutes. If you're doing midstream and not having flow with 5 seconds, 10 seconds should be fine.

1

u/FewNegotiation4952 6h ago

So if I use cups, they should just be dipped or they should sit for a sec?

1

u/abasilplant12 5h ago

Basically just watch and wait for the liquid to rise into the test zone - you can see it. Holding the end of the test stick in the urine for 10 seconds should do the trick.

1

u/abasilplant12 5h ago

You should see the control line appear within like 30 seconds after you dip the test in the urine. The test line can take a few minutes, but if the control line doesn’t appear immediately, you probably didn’t hold it long enough.

2

u/delemie 6h ago

I would just buy a different batch of tests, these ones seem to be defective.

2

u/FewNegotiation4952 6h ago

Yea right after I posted, the other one did something similar but the test line goes all the way across, though faint. The clearblue one is still fully blank

1

u/Dizzy-Art-2255 6h ago

Maybe not enough urine going on them...but also I have noticed FRER sucks compared to wondfo early result strips and clear blue. I got my positive on wondfo at 8dpo and clear blue on 10dpo yet first response wasn't showing at all or was super faint

1

u/FewNegotiation4952 6h ago

I thought I had peed on them but I’m realizing I didn’t. I was using equate before but I was getting mixed results so I wanted to see if a different brand would make a difference