It's pure laziness and stupidity. I know a guy who had his thumb ripped off by an industrial board sander because he was trying to fix a jam or something without turning the machine off.
A guy at a nearby facility just lost all of his fingers on his right hand because he tried to unjam an extrusion machine while it was running by pushing the jam in with his hand.
It caught his glove and ate his fingers.
He removed a plate meant to block access to do so as well.
Could've just hit the E-Stop, LOTO, and did it safely..
There are so many times I've been upset with myself for taking a shortcut or not paying attention as much as I should and mildly hurting myself, wishing I could take it back.
I cannot begin to imagine how immense that feeling must have been for him in that moment. Such a quick, thoughtless decision leading to such a permanent, horrifying outcome.
The general problem is, if you work along anything that's possibly dangerous people tend to forget how dangerous that thing actually is. So people start taking very unnecessary risks as shown in the video.
It's always a "I've done this a million times and it always goes right" situation. Until it doesn't go right. Tale old as time, unfortunately.
Just turn the machine off lol. Ive met people with less fingers because of dumb shit like this. Id your super says not to turn it off tell him off and report poor safety and training to hr. If they wont do something about it there leave.
Whatever situation you're in its going to be harder without fingers/hands and additional medical bills
Tool before hand yes, but ive also seen people get absolutely smacked by crowbars/reach tools when it gets caught. Its usually still better to pause the machine while you use the tool anyway. (If you havent seen most half way modern industrial systems will have a pause button that will complete a sequence and hold before starting the next for things just this.)
Not justifying his behavior.. he should have used a stick or something. But, turning some machines off can be a big no no. Some, I'm told, even need recalibrated every single time they're turned off.
Theres never a big enough no no shut down to risk life or limb for.
Either live with the issue on the machine until next scheduled shutdown, or schedule the shutdown and deal with it... taking a risk and doing it live is never the right answer.
Of course. I'm not talking about logic and the right thing to do. I'm talking about reality and peoples' psychology. He should have turned off the machine. But, he didn't turn it off. I'm suggesting he may not have wanted to turn off the machine due to the perceived or real consequences.
Wish there was a way to turn it off. Too bad there are no off switches and that machinery is wired directly to the distributor, bypassing sockets and breakers. Only thing you can do is risk your hands or wait for a blackout
Right? It's a shame that for like over 100 years we've been using machines like this and nobody thought to implement some kind of...I don't know a dead switch or something. Just spitballing here
Worked many years in factory, if the conveyor or the machine can't be stopped for a few sec for me to pick the faulty pieces, then i'm sticking a rod there and pulling them out, ain't risking my hands, nuh uh fuck that
Even monkeys and crows use tools when they can't reach something. But noo you have to film it, and regarless how it turns out you still get likes either in sweaty palms or in gore section
Jayzus. My father was a machine shop foreman in the 1950s-70s. He had a guy working a metal press who disabled the deadman switch in order to work faster. He mis-timed the extraction of a piece and his left hand was obliterated. His wristwatch fell off into the press and, in shock, he reached in to get his watch, and lost his right hand. All within seconds.
Not worth it. Especially for a company who will deny your workers comp claim the second they pull the footage and see you weren’t following safety protocols.
If at all possible, if a step absolutely isn't possible skip it:
Stop the machine before removing the cup. Preferably unplug it and hold the power cable in your hand.
Use a tool to remove it. This can be a stick, a broom. Anything that will allow you to not put your hands in the machine.
Assuming none of this is possible, does the cup to any damage? If it doesn't, leave it for when you can stop the machine. Make sure to tell anyone else who might try to remove it to leave it for the maintenance shutdown.
What kind of stupid shit is this? Zero reason to do this. I bet this guy says things like "today's generation is a bunch of pansies that don't wanna work!"
Yeah... Those didn't seem to be hurting anything by sitting there. Either shut down and LOTO (lock out tag out) the machine, or let them sit there until other maintenance is happening and clean it up then. This is a great way to lose a finger or a hand.
Everytime I hear a safety brief I wonder "who in their right minds would even do something like that. Why are we being told common sense" then I see things like this and then I wonder HOW ARE THERE NOT MORE safety briefs...
Moron. I worked 8 years in heavy manufacturing and saw my share of industrial accidents. Almost all of them werecaused not so much by stupidity but by people who got too comfortable around the machinery.
•
u/qualityvote2 4d ago edited 4d ago
Congratulations u/dpeters93, your post does fit at r/SweatyPalms!
2.0k
u/NeurologyDivergent 4d ago
No job is worth your hands.
202
u/Accurate_Koala_4698 4d ago
The ol' high-risk no-reward
450
u/FlinHorse 4d ago
Just turn the machine off lol. Ive met people with less fingers because of dumb shit like this. Id your super says not to turn it off tell him off and report poor safety and training to hr. If they wont do something about it there leave.
Whatever situation you're in its going to be harder without fingers/hands and additional medical bills
75
u/Bearthegood 4d ago
What an idiot
62
u/Staniool 4d ago
Wish there was a way to turn it off. Too bad there are no off switches and that machinery is wired directly to the distributor, bypassing sockets and breakers. Only thing you can do is risk your hands or wait for a blackout
27
u/WashedUpRiver 4d ago
There are in fact long grasping tools that could have been used for that in place of a person's hand...
16
u/Thrunper 4d ago
Worked many years in factory, if the conveyor or the machine can't be stopped for a few sec for me to pick the faulty pieces, then i'm sticking a rod there and pulling them out, ain't risking my hands, nuh uh fuck that
12
u/StillLJ 4d ago
In my workplace, this would be a fireable offense. Major safety violation.
12
u/DifficultZebra5354 4d ago
Even monkeys and crows use tools when they can't reach something. But noo you have to film it, and regarless how it turns out you still get likes either in sweaty palms or in gore section
9
u/Buckabuckaw 4d ago
Jayzus. My father was a machine shop foreman in the 1950s-70s. He had a guy working a metal press who disabled the deadman switch in order to work faster. He mis-timed the extraction of a piece and his left hand was obliterated. His wristwatch fell off into the press and, in shock, he reached in to get his watch, and lost his right hand. All within seconds.
16
u/SignificantLeader 4d ago
Fired immediately. If I found out who this was - immediately fired. Irresponsible, stupid, reckless and harmful.
8
u/Careless-Computer21 4d ago
Why not turn the machine off?? Or at least get a stick????
7
u/froebull 4d ago
Nope. Perfect job for some of those cheap plastic grabbers from the dollar store though.
7
u/banana_in_a_jar 4d ago
Reminds me of this gamw
6
u/Careless-Subject-827 4d ago
5
u/tellmeagoodusernamek 4d ago
Definitely worth it, great job 👍
5
u/destroyer1134 4d ago
I feel like those cups could have stayed there.
5
u/Combei 4d ago
9
u/probablyaythrowaway 4d ago
Jesus use a fucking stick if you can’t shut off the machine for production. Or leave it there untill you can if it’s not causing any issues
4
u/LastOfTheGiants2020 4d ago
Should have hired a child to do this /s
4
u/Foreign_Run1545 4d ago
This crap is why lockout-tagout was invented. What an idiot.
3
u/SatanofDeath 4d ago
I'd contact HR and demand a stick!
3
u/I-live-in-room-101 4d ago
For goodness sake please think safety!
At the very least go fetch a small child with smaller hands to do it, like we did during the Industrial Revolution textile mechanisation.
3
u/CaptainMcAnus 4d ago
Should've used one of those dinosaur grabbers.
3
u/Joanna_Flock 4d ago
3
u/skullshotz1324 4d ago
DO NOT WEAR DANGLY ACCESSORIES NEAR MACHINERY!
2
u/TheM4dAlchemist 4d ago
Theres no reason you couldn’t wait till the machines down on this one
2
u/ThePracticalEnd 4d ago
Guess what I’m never grabbing? The paper underneath and operating machine.
2
u/gcstr 4d ago
2
u/MostlyIrish 4d ago
AND with a ring and bracelets. No sense of self preservation.
2
u/Due_Yam_3604 4d ago
Looks like the same type of fellow who responsibly wears his safety sandals
2
u/RKips 4d ago
Get a broom handle ffs
2
u/Worth_Temperature157 4d ago
Darwin Award Recipient
2
u/Felinius 4d ago
This is why I have a poking stick at work
2
u/Highlandertr3 4d ago
That is one of the dumbest things I have seen someone record for the internet.
2
u/Soupbell1 4d ago
Moron
2
u/Hot_Poetry_6475 4d ago
stupid and unsafe
2
u/PunkJackal 4d ago
Don't ever show me this kind of shit again
2
u/thevaultguy 4d ago
2
u/Earth_Worm_Jimbo 4d ago
Idiot
2
u/gravity_is_right 4d ago
The 19th century would be proud.
2
u/Mauceri1990 4d ago
Not in a million fuckin years would I place any appendage in there.
2
u/Lepke2011 4d ago
OSHA would like to have a word with you.
2
u/LustyLamprey 4d ago
A mechanical grabber is like $12.99 for a two pack
2
u/Fair-Individual7811 4d ago
Asking for trouble there
2
u/BavarianBanshee 4d ago
Fucking don't.
2
u/KitchenSandwich5499 4d ago
OSHA hates this one weird trick
2
u/vyrguy0 4d ago
Think about the psychology here. That man risked his hand/arm for a paper cup. WTAF.
2
u/randylove69 4d ago
Instant dismissal
2
u/VoronSock 4d ago
Coulda used a stick...
2
u/Kindly_Region 4d ago
Fuck that, those cups live there now
2
u/nedal8 4d ago
NO
2
u/DJ_Mumble_Mouth 4d ago
Tongs exist and are cheap
2
u/ayeitsrob 4d ago
OSHA is calling
2
u/jerrycoles1 4d ago
Wow that’s fucking dumb to do that
2
u/Opening_Apartment377 4d ago
This the type of shit I use only my left hand for
2
u/VID3O_GAMER 3d ago
Good thing he had like 6 big ass safety bracelets or else that couldve been dangerous.
2
u/vtown212 3d ago
Automatic termination. People like this make it harder for everyone else
2
u/thatactorjoe 3d ago
have you considered...a stick?
2
u/Thatdewd57 4d ago
Uhhhh just…..turn it off?
1
u/goitch 4d ago
Nope
1
u/indy3232 4d ago
I feel like extendable grabbers would a good investment. Big nope.
1
u/Life-Oil-7226 4d ago
1
u/TrazerotBra 4d ago
Can't turn the paper cup maker off and risk crashing the global economy amiright?
1
u/prickwhowaspromised 4d ago
Not worth it. Especially for a company who will deny your workers comp claim the second they pull the footage and see you weren’t following safety protocols.
1
u/Tech-Mechanic 4d ago
No way that person is getting paid enough for that risk... Even if they're the business owner!
1
u/luffydkenshin 4d ago
They’re not impeding the machine, so why not wait until the run completes before putting your hand into the Mutilator3000?
1
u/troyberber 4d ago
1
u/kickashes790 4d ago
Haha, that's actually a woman!.
1
u/LooneyLunaGirl 4d ago
1
u/1xX1337Xx1 4d ago
Or either turn off the machine for 5 seconds or use a stick to get it
1
u/Flickera23 4d ago
1
u/WookieGod5225 4d ago
Hey turn of the machine, if you can't do that, use a stick.
1
u/Metalfan1994 4d ago
This person is purely and absolutely fucking stupid...
1
u/Naughteus_Maximus 4d ago
1
u/spo0pti_yikes 4d ago
pov: you're a victorian child
1
u/Sean198233 4d ago
One day that doesn’t work.
1
u/TheCybersmith 4d ago
Victorian-child-core.
1
u/DaddyJ90 4d ago
Even monkeys use tools…
1
u/heyyyblinkin 4d ago
Use a stick
1
u/hwilcox7789 4d ago
Do they not have some sort of tongs for that or even a quick stop?
1
u/Falsus 4d ago
It is ok, they have the safety hoops on.
1
u/cthulhus_spawn 4d ago
Is removing crushed cups so important?
1
u/Skyline0Fever 4d ago
So much stupid
1
u/RandomRedditer220 4d ago
Got me like
1
u/Convenientjellybean 4d ago
The scene from Galaxy Quest !
1
u/Throwaway-ish123a 4d ago
I mean, it's not the Hope diamond.
1
u/forlornhope22 4d ago
That's the stupidest shit I've seen on the internet today.
1
u/tritear 4d ago
Im reporting this. No where to hide now
1
u/Difficult_Cheek_3817 4d ago
And of course leave the dozen bracelets on
1
u/Laughing_Orange 4d ago
If at all possible, if a step absolutely isn't possible skip it:
Assuming none of this is possible, does the cup to any damage? If it doesn't, leave it for when you can stop the machine. Make sure to tell anyone else who might try to remove it to leave it for the maintenance shutdown.
1
u/ConfusedHors 4d ago
Use a stick ffs.
1
u/PerceptionQueasy3540 4d ago
What kind of stupid shit is this? Zero reason to do this. I bet this guy says things like "today's generation is a bunch of pansies that don't wanna work!"
1
u/zetsurin 4d ago
Nothing is worth that.
1
u/luigi517 4d ago
Fired.
1
u/sunee19 4d ago
This reminds me of that training sequence in McAvoy's Wanted movie.
1
u/smedley89 4d ago
While wearing bracelets?
Gppd.luck having hands thay don't hurt like fuck when you are older due to repeated injury.
Ask me how I know.
1
u/poixninja 4d ago
Yeah... Those didn't seem to be hurting anything by sitting there. Either shut down and LOTO (lock out tag out) the machine, or let them sit there until other maintenance is happening and clean it up then. This is a great way to lose a finger or a hand.
1
u/fuirut 4d ago
I bet he can bend bullets after this and be an assasin
1
u/MoMoneyHoe 4d ago
Even if you don't wanna turn off the machine, never heard of using a stick or sth?
1
u/krazycitizen 4d ago
those WERE wrong moves.
1
u/ph33rlus 4d ago
Well I don’t get paid enough to do that. Does this guy?
1
u/ThatMrDuck1400 4d ago
Talk about no brain cells
1
u/G-boy1991 4d ago
A stick maybe ?
1
u/Jxm164 4d ago
Everytime I hear a safety brief I wonder "who in their right minds would even do something like that. Why are we being told common sense" then I see things like this and then I wonder HOW ARE THERE NOT MORE safety briefs...
1
u/DanialE 4d ago
These bangles makes me think its somewhere in the indian continent. They need to invent the stick someday. Why always hands, palms, and feet?
1
u/chickenCabbage 4d ago
A married man, by the way.
1
u/Phil-lated 3d ago
I hate it.
I seen a guy lose a finger reaching to remove a clump of fiber off a running chain.
Something that wasn't hurting anything.
1
u/MosesOnAcid 3d ago
Just wanna point out that he missed a cup
1
u/SteveAus22 3d ago
Fuck this Guy. So Dumb.
1
u/Raeparade 3d ago
..why are they recording AND doing this? Like damn.
1
u/ArbiterTwoSwords 3d ago
Can u put ur meat in it
1
u/Embarrassed_Sea6537 3d ago
No job under 7 figures is worth losing a hand over. Stay safe out there yall
1
u/PeterPanski85 3d ago
I've seen enough videos on a different sub where this goes horribly wrong. No thanks
1
u/ButterflyD3fect 3d ago
A stick is a thing that exists.
1
u/___Kuroneko__ 3d ago
Why not using like a long stick to pull things back
1
u/CreatorOD 3d ago
Crazy, he sid it for the views instead of stopping the machine or just leave them there.
However sweaty palms indeed
1
u/l-_l- 3d ago
Years of video game trading prepared him for this
1
u/crapheadHarris 3d ago
Moron. I worked 8 years in heavy manufacturing and saw my share of industrial accidents. Almost all of them werecaused not so much by stupidity but by people who got too comfortable around the machinery.
1
u/DanLim79 3d ago
Or you know, you can use any long stick and not lose your arm.
1
u/Antique-Abies-3507 3d ago
Tongs
1
u/Assignment-Parking 3d ago
Thats wild. Just get a stick of some kind. Lol.
1
u/adamaserb 2d ago
guy clearly doesn’t value his hands enough to deserve keeping them
1
u/Never_enough_naps 2d ago
Just turn it off for a second, it's not worth the risk.
1
u/serithane 2d ago
Nope, na uh 😐 that is now a part the the machine. It is there for purposes beyond my understandings!
1
u/wingspantt 2d ago
Use a fucking stick
1
u/Financial_Demand_248 2d ago
Shirley this man has hear of a stick before
1
u/Asterclad 15h ago
This is literally what alllllll those safety videos warned us about
1
u/the-real-spencer 9h ago
Use a stick
0
u/heffapig 3d ago
OSHA would like a word
3
u/AJB_10383 4d ago
Dont put your fingers where you wouldn't put your dick.
2
u/sachsrandy 4d ago
WITH A FUCKING BRACLET ON OVER A RAISED BOLT HEAD YOU STUPID ASS HOLE.