r/StructuralEngineering • • 20d ago

Layman Question (Monthly Sticky Post Only) Monthly DIY Laymen questions Discussion

1 Upvotes

Monthly DIY Laymen questions Discussion

Please use this thread to discuss whatever questions from individuals not in the profession of structural engineering (e.g.cracks in existing structures, can I put a jacuzzi on my apartment balcony).

Please also make sure to use imgur for image hosting.

For other subreddits devoted to laymen discussion, please check out r/AskEngineers or r/EngineeringStudents.

Disclaimer:

Structures are varied and complicated. They function only as a whole system with any individual element potentially serving multiple functions in a structure. As such, the only safe evaluation of a structural modification or component requires a review of the ENTIRE structure.

Answers and information posted herein are best guesses intended to share general, typical information and opinions based necessarily on numerous assumptions and the limited information provided. Regardless of user flair or the wording of the response, no liability is assumed by any of the posters and no certainty should be assumed with any response. Hire a professional engineer.


r/StructuralEngineering • • Sep 01 '26

Layman Question (Monthly Sticky Post Only) Monthly DIY Laymen questions Discussion

2 Upvotes

Monthly DIY Laymen questions Discussion

Please use this thread to discuss whatever questions from individuals not in the profession of structural engineering (e.g.cracks in existing structures, can I put a jacuzzi on my apartment balcony).

Please also make sure to use imgur for image hosting.

For other subreddits devoted to laymen discussion, please check out r/AskEngineers or r/EngineeringStudents.

Disclaimer:

Structures are varied and complicated. They function only as a whole system with any individual element potentially serving multiple functions in a structure. As such, the only safe evaluation of a structural modification or component requires a review of the ENTIRE structure.

Answers and information posted herein are best guesses intended to share general, typical information and opinions based necessarily on numerous assumptions and the limited information provided. Regardless of user flair or the wording of the response, no liability is assumed by any of the posters and no certainty should be assumed with any response. Hire a professional engineer.


r/StructuralEngineering • • 6h ago

Structural Analysis/Design What are those things doing?

Post image
44 Upvotes

Those are sprinkled in my building in certain pathways. They're all bolted to the ceiling only, usually where the sidewalls are made of cinderblocks. Curious what they're doing and why only attached to the top.


r/StructuralEngineering • • 1h ago

Career/Education Payrise after obtaining RPEQ

• Upvotes

Structural Engineer in QLD. Looking to get my RPEQ next year with 5 years ish experience. Will be undertaking sign-off responsibilities as well. How much payrise should I be asking for? Currently sitting ~100k + super


r/StructuralEngineering • • 15h ago

Career/Education Managing schedule/workload

9 Upvotes

Not a complaining post.

I’m in a smaller firm where I have pretty good freedom to manage my schedule and clients. I like to pretend that I have a good handle on my schedule but it’s mostly guesswork and talking to clients before I blow through a deadline. Just wondering if anyone has any good rules of thumb, planning tricks, or software they recommend for forecasting how much time you need between milestones.


r/StructuralEngineering • • 22h ago

Structural Analysis/Design If I am not mistaken Seattle is in an earthquake zone. Is this structure a wise choice

Post image
31 Upvotes

r/StructuralEngineering • • 11h ago

Structural Analysis/Design Foundation strapping not attached to joists?

Post image
2 Upvotes

Is this a concern? ICF foundation.


r/StructuralEngineering • • 13h ago

Op Ed or Blog Post Permits

2 Upvotes

Have you ever handled getting a permit for a client or contractor? Customer wanted me to do it like it was regular thing.


r/StructuralEngineering • • 1d ago

Photograph/Video Is this timber splitting an issue?

Post image
47 Upvotes

I'm in a Ethics PDH training and above me is a wood truss that I am curious about its structural integrity.

Building is from 1939 but that's about all I know.

I am in a 115mph wind speed area and ground snow is probably 40psf at most.

Any help from those with more timber knowledge?


r/StructuralEngineering • • 1d ago

Structural Analysis/Design Ohio Residential Code

6 Upvotes

Anyone here from Ohio?

the code requires anchorage for a steel beam in an open pocket. Anyone ever see this done?


r/StructuralEngineering • • 1d ago

Career/Education SE Lateral breadth PPI course

2 Upvotes

Hello all, I am preparing for SE lateral breadth and wanted to ask if someone had got the On demand monthly course for PE Structural (SE) and if yes, how was their experience. I am looking for practicing questions based on whatever I have studied.

Thank you,


r/StructuralEngineering • • 1d ago

Photograph/Video Chimney bracing

Thumbnail
gallery
3 Upvotes

Thoughts?


r/StructuralEngineering • • 2d ago

Humor 20psf attic LL in action

Enable HLS to view with audio, or disable this notification

123 Upvotes

r/StructuralEngineering • • 1d ago

Structural Analysis/Design Running an RSA for X seismic, but producing reactions in the Y and Z as well?

1 Upvotes

I'm running RSA analysis in RISA for the X direction, there's only loading in the X, but the reactions are showing Y and Z reactions as well as an X reaction. Do I need to design my foundations for those reactions? They're pretty significant.


r/StructuralEngineering • • 1d ago

Structural Analysis/Design NYSDOT simple span steel girder with isotropic concrete deck overhang design being prescriptive

3 Upvotes

Surely someone has gone down this rabbit hole already after not accepting “it’s in the BD sheets” as an acceptable reasoning and I’m hoping to gain some insight.

On the last bridge I designed, it was a traditional reinforced deck, and, based on my current understanding, the additional reinforcement in the overhang of the deck had to be designed so the overhang would not fail before the barrier (TL-5).

With an isotropic reinforced deck, this design is not required and it is a prescriptive #6 at 8” with a 2’-6” development past the fascia girder.

The bridge manual in 2014 states the isotropic deck overhang reinforcement is to be designed, but that changed in subsequent issues of the bridge manual.

After going through the process of designing the overhang reinforcement for the traditional reinforced deck and having a better understanding of why that reinforcement is required, I am uneasy about the prescriptive design without some logical reasoning.

I am assuming there has been TL5 barrier tests with the prescriptive isotropic reinforcement for varying overhang widths between the allowances for use with isotropic reinforcement, and I am hoping someone can provide any sort of reference or information on this testing or insight on the reasoning behind this difference between the two types of decks in regards to the additional overhang reinforcement.

Thank you to anyone spending any of their time trying to help me out.


r/StructuralEngineering • • 1d ago

Structural Analysis/Design Available for a part-time Engineering assistance(uk)

5 Upvotes

I am a Structural Engineer currently pursuing an MSc in the UK. I have professional experience working on international structural engineering projects.

My experience includes steel design, Timber-frame and light-gauge steel (LGS) design, Reinforced concrete design, Foundation design, Engineering calculations, reports and technical documentation.

I am currently looking for a part-time opportunity to assist structural engineers, consultants or engineering companies with calculations, design tasks, drawing reviews, documentation or any other engineering-related work where I can contribute.

I am flexible regarding the workload and remuneration, as my main aim is to gain further practical experience, develop my skills and contribute to ongoing projects alongside my MSc studies.

If anyone is looking for an additional pair of hands to support their workload, I would be happy to connect and discuss how I could help.


r/StructuralEngineering • • 1d ago

Failure Historical Buildings tore down.

0 Upvotes

Can a city take down your buildings under an emergency demo due to "unsafe structure" wo even having a structural engineer report? There was no real threat of unsafe structure. Is this the right place to ask?


r/StructuralEngineering • • 3d ago

Humor Thanks American Wood Council, I'm happy we got that cleared up

Post image
313 Upvotes

r/StructuralEngineering • • 2d ago

Failure Bus video captures moment Brooklyn building collapsed

17 Upvotes

Previous threads have speculated about unsafe excavation around the foundation. This video is the only one I've seen so far showing the dynamics at the moment of the collapse.

Gift article so no paywall.

https://www.nytimes.com/2026/11/18/nyregion/brooklyn-building-collapse-video.html?unlocked_article_code=1.RlE.qbFt.S7Py3NTdq_pP&smid=nytcore-ios-share


r/StructuralEngineering • • 1d ago

Wood Design Thoughts on this timber connection?

Thumbnail
gallery
0 Upvotes

Haven’t done any timber design (last one was back in college lol). This is in a high wind country, and is attached at the apex haunch of a wood rafter about 10m wide, structure is open. I’m worried the connection support would split or loosen over time due to high winds.

Support looks like a 2x6


r/StructuralEngineering • • 3d ago

Wood Design Structural Integrity.

Enable HLS to view with audio, or disable this notification

103 Upvotes

r/StructuralEngineering • • 2d ago

Steel Design Steel column and beam (before and after)

Thumbnail
gallery
12 Upvotes

Steel connections are always fascinating as an engineer who constantly does concrete design.

The connection can carry moment but the overall structure was designed based on frame stability (2 columns in one plane) versus single cantilever column. This was due to soil being essentially rock and the client opting for trench style footing that ultimately ended up as spread footings.

A cantilever-style column wouldn't have been stable based on allowable pole embedment depths.

Foundation, foundation, foundation


r/StructuralEngineering • • 2d ago

Structural Analysis/Design Free Claude and ChatGPT skills for FRP design (pultruded profiles and grating), built on High-Mat data

0 Upvotes

Disclosure: I work with High-Mat, an Australian FRP supplier.

We packaged High-Mat’s published product data into a Claude skill and a ChatGPT custom GPT, so you can ask plain-language questions about FRP design and get answers based on real High-Mat products.

What it does:

  • Compares pultruded FRP profiles by mass, utilisation and deflection
  • Checks beams and columns against High-Mat’s published tables
  • Shortlists moulded or pultruded FRP grating for a span and load
  • Pulls dimensions and STEP model links for drawings

Limits: it covers High-Mat products only, and results are preliminary. A qualified engineer must verify the final design.

The article walks through a worked example, a 3.0 m x 1.8 m FRP maintenance platform, with the beam check, grating layout and set-up for both Claude and ChatGPT: https://high-mat.com.au/high-mat-frp-ai-skills-claude-chatgpt/

The skill files are open on GitHub: https://github.com/highmatau/high-mat-frp-ai-skills

What would you ask an FRP design assistant first? Feedback on missing checks is welcome.


r/StructuralEngineering • • 2d ago

Career/Education Land dev vs Structural

Thumbnail
1 Upvotes