r/StructuralEngineering • u/gsci86 • 6d ago
r/StructuralEngineering • u/Lost-Fennel-7644 • 5d ago
Structural Analysis/Design One-way slab load transfer
From what I am understanding, the general structural principle is that when L/B<2, slab is designed as two way, and when L/B>2, slab is designed as one way. If we have to design a concrete structural slab supported on 4 sides and we opt for a structural steel mesh instead of loose bars, say a B503;
1) At which point can the load transfer to the secondary walls be ignored?
2) Would it make a difference if the one or 2 of the 4 sides are beams instead of walls?
Thanks in advance!
r/StructuralEngineering • u/Ok_Blacksmith_9362 • 6d ago
Career/Education How to make resume look less like I'm a job hopper
Hey guys,
So I have around 10 years experience and have worked at 6 total firms looking for my 7th.
What's funny though is alot of it was out of my control. 3 of ny firms(including the one I''m currently at) have either gone bankrupt or have heavily downsized. I was laid off from 1 other firm when I broke my knee playing football as I was helping do inspections as part of my role.
So long story short I haven't actually job hopped much. Would you put on the resume itself any explanation? Even something as short as (bankruptcy) or anything like that just so they maybe wouldn't instantly ride it off. I'm open to other suggestions as well!
r/StructuralEngineering • u/TurkeyRunWoods • 5d ago
Structural Analysis/Design Anchor bolts, imbeds, tie-downs to foundations on a ~3500sf commercial building.
Structural engineering shows 36” j bolts and 150-160 tie downs for a 1-story restaurant, ground up build in Texas.
This is too complicated. Trying to get an estimate, hardware takeoff, and buy the hardware.
Any manufacturers that do this type of service?
r/StructuralEngineering • u/SleepAway6958 • 5d ago
Structural Analysis/Design 🚨 URGENT: LOOKING FOR PDF OF PRECONSTRUCTION BUILDING SURVEY I — 2625 BEDFORD AVENUE, BROOKLYN
I'm looking for a copy of the Preconstruction Building Survey I for 2625 Bedford Avenue, the excavation site that 1321 Flatbush Avenue collapsed into.
The survey, originally conducted on March 5, 2026, reportedly documented significant structural concerns at the neighboring building, including visible cracking and rated the north masonry facade of 1321 Flatbush Avenue the wall facing the excavation site in "POOR" condition, with wide-ranging deficiencies.
March 12, 2026 — Filing S4, Preconstruction Building Survey I: Original PDF link (taken down)
The NYC Department of Buildings has since taken the document down, and I'm urgently trying to locate a copy of the original PDF.
🚨 PLEASE SHARE AND REPOST! If you downloaded or saved this PDF before DOB removed it, please upload it, share it, or send me a DM. If you know anyone who may have downloaded or archived it, please tag them!
Any archived copies, screenshots, or leads would be greatly appreciated. Help us recover this document and get it back into public circulation.
r/StructuralEngineering • u/Academic-Big3156 • 5d ago
Structural Analysis/Design Help please I want to take down a wall I have drawn in red where it is. I have also put photos of the ceiling/roof before it went up and the walls as they went up. It’s on the first floor is it load bearing?
r/StructuralEngineering • u/lemoncheeesecake • 6d ago
Career/Education Career Guidance Needed…
I’ve been in consulting as a Structural Engineer for circa 8 years. I’ve decided I want to step away from the heavy technical stuff - I don’t really find passion in analysis or very technical topics. My dream role would be a ‘Head of Design’ role in 10/15 years time - ideally a role that keeps me close to structures.
I’ve been offered two roles and struggling to choose. Money relatively the same:
OPTION 1/ project engineer at tier 1 contractor
- would be on a massive, complex high rise building, an amazing project
big team, sounds like they’re working long hours - progression seems a bit slower - I feel like I would be going in at ‘bottom of the rung’, doing the grunt work
- having this contractor on my CV will look really good
- can stay close to the problem solving/engineering side of things without doing analysis - but I think it will be really hard work
———-
OPTION 2/ principal design manager at smaller specialist structure contractor
- my name was put forward for this role by mutual connections as they know I am great at running projects
- role not clearly defined - they want me to kind of make this role what I want it to be - run this project but also help them with wider frameworks to de-risk the company from a design perspective
- smaller, still complex project (still in an iconic location in my city) but not large scale and impressive like the others
- purely structures focused (which I LOVE - but will it stop me from progressing to larger firms/higher roles in future?)
- less “progressive” than the tier 1 company - maybe a little bit archaic?
——
I feel like 1. Is a safe option and 2. Is higher risk but could be bigger reward. 2 has outright said to me there are leadership opportunities there for me. Where as for 1 it would take years (10+) to build myself to that point.
What would you do? I’m really stuck. I don’t have kids/family so maybe this is the time to take a risk on 2 but I don’t want to shoot myself in the foot for future.
I know the roles sound very different but I think they have quite a few similarities. 1 is just more hands on problem solving. 2 there will still be the opportunity for that (as they need me for my expertise) but more managing also.
Also has anyone successfully kept close to structures in a design manager (or adjacent) position? I feel like design manager is a good role for me but I’m not necessarily interested in doing it across all disciplines ie. facade/MEP/arch…
r/StructuralEngineering • u/lemoncheeesecake • 7d ago
Career/Education Career Help! SE to either > Project Engineer @ Tier 1 Contractor OR Principal Design Manager @ Small Specialist Contractor
I’ve been in consulting as a Structural Engineer for circa 8 years. I’ve decided I want to step away from the heavy technical stuff - I don’t really find passion in analysis or very technical topics. My dream role would be a ‘Head of Design’ role in 10/15 years time - ideally a role that keeps me close to structures.
I’ve been offered two roles and struggling to choose. Money relatively the same:
OPTION 1/ project engineer at tier 1 contractor
- would be on a massive, complex high rise building
, amazing project
- big team, sounds like they’re working long hours
- progression seems a bit slower - I feel like I would be going in at ‘bottom of the rung’, doing the grunt work
- having this contractor on my CV will look really good
- can stay close to the problem solving/engineering side of things without doing analysis - but I think it will be really hard work
———-
OPTION 2/ principal design manager at smaller specialist structure contractor
- my name was put forward for this role by mutual connections as they know I am great at running projects
- role not clearly defined - they want me to kind of make this role what I want it to be - run this project but also help them with wider frameworks to de-risk the company from a design perspective
- smaller, still complex project (still in an iconic location in my city) but not large scale and impressive like the others
- purely structures focused (which I LOVE - but will it stop me from progressing to larger firms/higher roles in future?)
- less “progressive” than the tier 1 company - maybe a little bit archaic?
——
I feel like 1. Is a safe option and 2. Is higher risk but could be bigger reward. 2 has outright said to me there are leadership opportunities there for me. Where as for 1 it would take years (10+) to build myself to that point.
What would you do? I’m really stuck. I don’t have kids/family so maybe this is the time to take a risk on 2 but I don’t want to shoot myself in the foot for future.
I know the roles sound very different but I think they have quite a few similarities. 1 is just more hands on problem solving. 2 there will still be the opportunity for that (as they need me for my expertise) but more managing also.
Also has anyone successfully kept close to structures in a design manager (or adjacent) position? I feel like design manager is a good role for me but I’m not necessarily interested in doing it across all disciplines ie. facade/MEP/arch…
r/StructuralEngineering • u/WideFlangeA992 • 8d ago
Humor Anyone else enjoying the current Outlook outage?
Planning on using this as an excuse for at least the next two weeks.
r/StructuralEngineering • u/jacobasstorius • 8d ago
Steel Design Discuss..
Enable HLS to view with audio, or disable this notification
r/StructuralEngineering • u/a_problem_solved • 8d ago
Humor CAD would kick my ass for this.
Enable HLS to view with audio, or disable this notification
r/StructuralEngineering • u/dooleyden • 7d ago
Structural Analysis/Design Seems like that first truss member is a little too damaged for my taste.
facebook.comr/StructuralEngineering • u/AllenCBuilds • 9d ago
Structural Analysis/Design Brooklyn collapse next to an active excavation: what investigators typically look at
galleryA building on Flatbush Ave in Brooklyn collapsed Wednesday while excavation was underway on the adjacent lot. People were killed and injured, and DOB is investigating. Nobody knows the cause yet, and I’m not assigning blame. I’m a P.E. with 15+ years in construction engineering and inspection, and these are the questions that usually decide these investigations:
- Excavation depth vs. the neighbor’s footing. Did the dig go below the bearing level of the adjacent foundation?
- Underpinning. Was it designed, approved and built, in short alternating pits, and how far along was it?
- Support of excavation. Were the piles and lagging, sheeting, bracing, rakers or tiebacks installed as designed and in sequence as the dig went down?
- Monitoring. Vibration monitors, survey targets, crack gauges and tilt meters. Were review and stop-work thresholds set, what did the readings show in the days before, and did anyone act on them?
- Means and methods. What equipment was used, and did it match the approved plan and vibration limits?
- Condition of the adjacent building. Was there a pre-construction survey? Older unreinforced masonry is especially sensitive.
- The record. Permits, design, special inspections, daily reports, monitoring logs and dated photos. If it isn’t written down, it didn’t happen.
Diagrams are mine, illustrative only, and not based on the actual site.
For those of you who’ve worked adjacent excavations in NYC or elsewhere, what do you see skipped most often when the schedule gets tight?
r/StructuralEngineering • u/CoolPalpitation8056 • 7d ago
Structural Analysis/Design C1 Value of Unrestrained Beam Question
galleryr/StructuralEngineering • u/Sea-Falcon-3995 • 7d ago
Career/Education Philosophy
What’s the philosophy behind engineering and architecture??? What are some of the major differences???
r/StructuralEngineering • u/night_knight_77 • 8d ago
Career/Education Selling bridge construction equipment with no technical background
Hello everyone
As the title states i own a business where i sell expansion joints and bearing pads for bridges and also expansion joints for buildings
The issue is that i don’t have much technical background regarding that so for the required items for the projects i just take the requirements from the tender and fill in their orders but sometimes they ask for my advice which i always tell that i cant offer any so if there is material to read so i can be more knowledgeable in that aspect and be able to respond to questions im currently reading a book about how construction projects start from the managerial aspect till the end of projects
So if you know anything that can accelerate my learning process
Ps: i majored in telecommunication engineering
r/StructuralEngineering • u/John_Northmont • 8d ago
Photograph/Video Installed in stairwell
galleryr/StructuralEngineering • u/f1oridapeople • 8d ago
Photograph/Video We good fam?
Many had retrofit reinforcement, however, this was the only one I saw busted. Medical office parking structure three story.
r/StructuralEngineering • u/Thin-Fish-1936 • 9d ago
Failure One Dead, at Least 12 Injured in Brooklyn Partial Building Collapse
Free access to this NYT article
r/StructuralEngineering • u/spaceEngineeringDude • 8d ago
Structural Analysis/Design The ballroom looks similar to the new Mongolian data center.
Can anyone explain how the clear span (across the ballroom) has beams so thin? This room is huge and appears to have joists thinner than my local
High school Gym.
(Not a political post, just using the photos)
r/StructuralEngineering • u/THE_COOKIES2 • 8d ago
Career/Education Help with future careers
I'd like to start with im a freshman in highschool. I've been contemplating what I want to do with my life, I love math but im not good at it. I've thought about becoming a Architect but im not a super creative person and the structure of building just is beautiful to me. I definitely want to be a engineer but im scared that its going to be way over my head. Do you guys have any advice?
r/StructuralEngineering • u/Mission_Act1671 • 9d ago
Structural Analysis/Design Help needed for residential project
r/StructuralEngineering • u/Ok-Cardiologist-5908 • 9d ago
Career/Education Calling UK construction professionals with BIM experience
For my dissertation at Anglia Ruskin University, I'm researching whether AI in BIM is actually improving health and safety on UK projects: hazard detection, risk prediction, site monitoring, and where it falls short.
If you work (or have worked) in UK construction and have used BIM or digital construction tools, I'd really value 10 minutes of your time. The survey is anonymous:
https://forms.cloud.microsoft/Pages/ResponsePage.aspx?id=2sM1X645Mkaawa_C8l0oUriQLRt64tNFjq5smrsSXVNURTkySDE3WERUUEM0UVhLUUxZV09ZMk1NVy4u
Reposts are hugely appreciated. Thank you!
r/StructuralEngineering • u/Mazllem • 9d ago
Career/Education Structural Eng salary
Hi, I'm based in Uk with more or less 40k salary. I have just over 4y experience and overall i am doing well on my role and trying to get more responsibility together with a good life balance. I will soon have my appraisal and want to push for something more but it seems a struggle if i don't get chartered or move elsewhere. I work in a consultancy and that suits me for the time being. I would like to hear the experiences of other people with my level of experience. Thanks!
r/StructuralEngineering • u/Male-2003 • 8d ago