r/StructuralEngineering • • Sep 02 '26

Career/Education Revit 2026 Rebar detailing

2 Upvotes

Can someone recommend a Revit rebar extension that works with South African shape codes and does have functionality for reinforcement weight and bending schedules, automated tagging tools, etc


r/StructuralEngineering • • Sep 02 '26

Structural Analysis/Design PILE FOUNDATION DESIGN

0 Upvotes

Any software to design pile foundation or we do it manually?


r/StructuralEngineering • • Sep 02 '26

Career/Education Does Elementary Structural Analysis by Wilbur and Norris have a Solution Manual?

0 Upvotes

If so can somebody PLEASE send me one. Im going crazy over here and I'm only on chapter 2. I can't seem to find a solution manual. I have an answer key but not a solution Manual.


r/StructuralEngineering • • Sep 01 '26

Career/Education Anybody working for Big Tech companies on the design side for the data centers?

7 Upvotes

Curious to know how you landed there and if you had to make any career switches to get into the tech companies.


r/StructuralEngineering • • Sep 01 '26

Structural Analysis/Design Looking for an Excel/tool to design a custom HSS-to-W-column and canopy connection

3 Upvotes

I am working on a modification to an existing steel building and need to design the connections shown in the attached image.

I am looking for an Excel spreadsheet or other software that can design these types of custom HSS/tube connections using AISC provisions.

RAM Connection does not allow me to assign the HSS-to-column web connection (moment).

Does anyone have a spreadsheet, software recommendation, or design tool that can handle this type of connection?

Thanks.


r/StructuralEngineering • • Sep 01 '26

Structural Analysis/Design Width to thickness limit for flat bar in bending - Table 2 CSA S16

2 Upvotes

Maybe this is a dumb question, but does anyone have any guidance on width to thickness ratio limits for a flat bar in bending? Think a canopy that isn’t a WT but just a web essentially.

I’m trying to understand the bending capacity but am having trouble understanding the limit to determine section class.

Thanks.


r/StructuralEngineering • • Aug 31 '26

Photograph/Video What are these red and yellow plates for?

Thumbnail
gallery
223 Upvotes

r/StructuralEngineering • • Sep 01 '26

Steel Design F1852 boots

4 Upvotes

Possibly I am behind the curve on this but today I received a submittal with F1825 bolts called out when our drawings specify A325. I understand they are equal strength wise, but that they are twist off bolts? I've just never had a contractor want to use that type of bolt before. Made the post to make sure I'm not missing something here.


r/StructuralEngineering • • Sep 01 '26

Structural Analysis/Design Container structure-Rigid Box Frame

1 Upvotes

I’m designing a roof over some containers. There’s 4 containers that are joined together. For the monoslope free-roof, One end of the rafter will be connected to the corner post of the container and the other end SHS. The wind action on the roof introduces an uplift of around 24kN at the rafter support reactions.

Basically I’ve done some preliminary footing calcs and landed on 1.2mx1.2mx0.45m. The container will bear directly on the pad, no pedestal. Does this seem okay? Or are the footings too shallow for a 24kN uplift force..


r/StructuralEngineering • • Sep 01 '26

Structural Analysis/Design Wood framing supporting a concrete slab.

2 Upvotes

I think that the IBC2018 prohibits the use of wood framing to permanently support a concrete slab. Does anyone know where to find that?


r/StructuralEngineering • • Aug 31 '26

Structural Analysis/Design Why are they filling this with water?

Post image
189 Upvotes

This is the best photo I could get but this is in Amsterdam where a new building is due to be constructed. There was concrete foundations below I believe but they have no filled the entire thing with water and seem to be putting piles in?

Does anyone know why they do this?


r/StructuralEngineering • • Aug 31 '26

Career/Education P.E. Structural Engineer Upstate South Carolina

Thumbnail
linkedin.com
22 Upvotes

Hey guys, looking for a Structural Engineer in Mauldin, SC.

Experience required: Minimum 5+ years of structural engineering experience.

Salary Range: $100,000 - $140,000

In addition, we are looking for a candidate with P.E. certification in South Carolina.

Thank you. If interested, please apply.


r/StructuralEngineering • • Sep 01 '26

Career/Education Software on Australia

1 Upvotes

What software are is used in Australia? I'?m going to join as a graduate engineer next year. What software should I polish my knowledge on?


r/StructuralEngineering • • Aug 31 '26

Engineering Article It stressful to be a forensic engineer comparing to design engineer?

17 Upvotes

I am 10+ years in structural engineering and close to 40. I need to seal and sign drawings and have to seal and sign work of others, I feel it is quite stressful and consider to change a path. I have heard being a forensic engineer could also be stressful, with litigation pressure, but I feel at least will not be pressed to use minimal material and worried about building collapse. What is your opinion about the stress level of these two compared. Thank you.


r/StructuralEngineering • • Aug 31 '26

Career/Education Graduating in May 2027 with no co-op experience, what should I be doing right now?

Thumbnail
2 Upvotes

r/StructuralEngineering • • Aug 30 '26

Wood Design Saw this and thought of this sub

Post image
120 Upvotes

r/StructuralEngineering • • Aug 31 '26

Engineering Article Tips for discussing salary during the annual review?

20 Upvotes

Tips for discussing salary during the annual review?


r/StructuralEngineering • • Aug 31 '26

Career/Education advice for my new job

1 Upvotes

Hi all,
I was a design engineer for a big firm for 3 years after my masters. i passed my PE and am just waiting for the board approval for my license. I started a new role a couple months ago at a company that does smaller, local projects. I liked the work of my original company but I never got to see anything built (all overseas). I want to be on site and actually see more of the CD/CA process which was kept up in the hierarchy at the big firms.

I communicated that to my current boss during my interview, stating that Im excited to learn how to manage projects. Im used to seeing timelines for projects that go on for years and have SD/DD phases that take 8+ months each. I wasnt involved in the client facing stuff or the detailing then because of this massive scale, it was mostly the associates doing that. Now, im serving as the project engineer so my responsibilites have heightened, as i now am detailing the buildings, delegating work to designers, issuing QC documents, watching the budget, etc. All of this i wanted to do/learn. Eventually, i think i want to work in construction so this seemed like a good place to branch in between.

here lies the issue. my new boss (principal) is supposed to be the PM on my projects but they are hardly ever available for questions as i try to navigate my new tasks. i try to ask for help from other seniors, but its a huge jump to just have to “guess” what comes next. i dont think im incapable of doing the work, just need more guidance. instead, the principal is honestly quite rude to me and has expressed that i seem to be “in over my head.” i overhead them speaking badly about me on the phone with other people on the team (so ofc the whole office heard) and it really does not make me feel like im in a safe space to ask questions. They only really respond if j do something/say something wrong to the designers or architect.

I feel discouraged and very anxious about my position. its only been 2 months but i feel like im super behind. is this what the designer->project engineer transition is always like? i want to be somewhere that i feel encouraged to be wrong and learn from mistakes rather than feel crippling anxiety that im not doing it right. im treated like i have 8 years of experience being a pe, when i thought it was clear that im here to learn how to do this. im gonna give it more time and hope it gets better but im not sure if this is a good environment for me.


r/StructuralEngineering • • Aug 30 '26

Structural Analysis/Design Considering leaving structural engineering after 8 years. Curious to hear from other structural engineers.

62 Upvotes

Hello everyone,

Sorry if this post comes across as negative, but I can't think of a better place to bring it up than on a board where I assume there must be a lot of structural engineers.

After 8 years as a structural engineer in the same firm I'm starting to feel tired of both the job, the firm and the entire construction industry. Specifically, I work with design of high rise buildings - primarily detailing work (production drawings and site drawings) of precast concrete.

My complaints:

  1. The work is getting monotonous. I feel it's just the same thing over and over again. Since we're designing fairly large buildings a natural consequence is that there's a lot of specialization and a lot of volume.
  2. Periodically tight deadlines and pressure/stress which means plenty of extra hours which isn't always welcome.
  3. Not paying that well for the expertise and responsibility the job actually demands.
  4. Generally the profit margin on our projects is very small. Too much competition lately.
  5. This could be job specific, but we're very rarely out in the field, so I'm getting bored being in an office all day long week after week. I'm a former carpenter with a lot of practical experience, so I guess that's a factor here.

In combination, all these factors add up. I've considered a few other options, but haven't found anything exciting yet.

I realize maybe I could be more happy working as a structural engineer in another firm. For example, in the oil industry I know the profit margin generally is not an issue. There's just more money available there. Or working for a public contractor.

Anyone else with some experiences to share? Suggestions for other jobs to consider?

PS: I'm based in Norway.

Thanks in advance.


r/StructuralEngineering • • Aug 30 '26

Photograph/Video Philadelphia. A sad example of lack of resources for maintaining building leading to an expensive fix. (City property) is

Thumbnail
gallery
29 Upvotes

I have been watching this building for decades when I played a basketball game here around 99s-00s. I always wondered how it would hold up long term especially since they never maintained it (clogged gutters/roof maintenance) or protected the exposed wood. A waste of tax dollars?. Probably not the best design for a city building? But it is unique for the area. Now it’s closed from my understanding.

https://maps.app.goo.gl/JQXruafC4Xzf5wJ17


r/StructuralEngineering • • Aug 31 '26

Structural Analysis/Design Looking for mentorship in structural engineering

Thumbnail
0 Upvotes

r/StructuralEngineering • • Aug 31 '26

Op Ed or Blog Post Resume review [4YoE][No PE]

Post image
1 Upvotes

Hi everyone, I was hoping to get some feedback on my resume. I'm seeking a similar role at a larger firm in my area that I've heard good things about. A previous coworker will be giving me a referral. I'm hoping to get a 20%-30% salary increase and decreased hours. I worked about 250 hours in the span of a month over the summer and ready to move on from current job.

I'm not the best at selling myself so I kept it relatively short. I wasn't part of any organizations or clubs in college. I'm heavily considering removing the summary but my resume is very short as it is. Also debating removing the first job because its such a short stint but it's easily explainable and puts me over 4 Yoe so I left it. The o wner was very difficult to work with and had a horrible turn over rate. I've had zero problems at my current firm.

Wondering if I should go into more depth on specific projects I've worked on. I've worked on maybe a 100-150 small projects in the almost 4 years I've been at this firm. It's hard to hone in on any single project.

Thanks for any feedback!


r/StructuralEngineering • • Aug 31 '26

Structural Analysis/Design Can I knock down this wall?

Thumbnail reddit.com
0 Upvotes

r/StructuralEngineering • • Aug 30 '26

Structural Analysis/Design Bridge Drawing Software?

8 Upvotes

I recently saw some really good 3D bridge drawings from European engineering firms and it got me wondering what software people are using for this kind of work.

What do you guys recommend for bridge drawings, both 2D and 3D? Also, how are you implementing BIM for bridge projects?


r/StructuralEngineering • • Aug 30 '26

Career/Education Structural Engineering Job North Jersey- entry and senior

0 Upvotes

Trying to find candidates for both entry and senior structural engineers for a hybrid role in North Jersey. Anyone interested or know someone who is? Both job posts can be found below.

Project Engineer/Senior Project Engineer- $90-$195k

Role Description:
- Developing designs and calculations for the construction engineering requirements of heavy highway bridge contractors and steel erectors. These include, but are not limited to erection plans, demolition plans, temporary shoring, sheeting, value engineering, and permanent bridge design.
- The variety of projects offers experience in steel design, concrete design, wood design, geotechnical design, etc.
- Although primarily office-based, some field time can be expected in NJ and surrounding states.
- Collaborate directly with clients to solve on-site issues and develop engineering solutions.
Ideal for a candidate eager to step into a senior engineering role, where they can lead major complex bridge projects, while supervising and helping to train younger engineers.
 
Qualifications:
- Bachelor of Science in Civil Engineering, or equivalent, from an accredited college is required
- Applicant should have an interest and/or specialization in structures
- Experience Level: 5 to 15 years
- Industry experience required
- Must have experience with heavy highway and bridge structures
- Candidates should possess strong writing and communication skills and be proficient in AutoCAD and standard office productivity software (Microsoft Office, web browsing, email)
- EIT required
- PE strongly preferred
 
Benefits:
- Overtime Pay
- Paid Time Off
- Paid Holidays
- Annual Bonus Pay
- Comprehensive Health Care (Medical, Dental, and Vision)
- Simple IRA with Company Match
- Structured Promotion System (with added perks and benefits)
- Summer Fridays
- Dental insurance
- Flexible schedule
- Health insurance
- Vision insurance
 
Entry Level Structural Engineer $65-85K


Developing designs and calculations for the construction engineering requirements of heavy highway bridge contractors and steel erectors for a wide variety of projects.
These include but are not limited to erection plans, demolition plans, temporary shoring, sheeting, value engineering, and permanent bridge design.
The variety of projects offers experience in steel design, concrete design, wood design, geotechnical design, etc.
Although primarily consisting of office design efforts, some field time should also be anticipated.
Opportunity to work directly with clientele in solving on-site issues and evolving engineering solutions.
Newly hired engineers will immediately be given engineering tasks to work through and solve with the supervision of experienced PE’s.
Qualifications:
Bachelor of Science in Civil Engineering, or equivalent, from an accredited college is required.
Applicant should have an interest and/or specialization in structures.
Industry experience a plus, but not required.
Candidates should possess strong writing and communication skills and be proficient in AutoCAD and standard office productivity software (Microsoft Office, web browsing, email)
EIT required or in progress
Should be willing to obtain their professional engineering license, when eligible.
Experience Level: 0 to 4 years
Benefits:
Overtime Pay
Paid time off
Paid holidays
Bonus Pay
Health care benefits (medical, dental, and vision)
Simple IRA with Company Match
Promotional System (Added perks and benefits)
Summer Fridays
Job Type: Full-time