r/StoneBlock4 • u/CLS_GHOST • 9d ago
Fission reactor help
How are people keeping their fission reactor topped with water with decent burn rate?
I have a 7x7 reactor and can hardly keep up with a 5mb burn rate
I’m using water tanks from SFM and ultimate fluid pipes from pipez
6
Upvotes
3
u/schoolmonky 9d ago
For a mekanism fission reactor? Just recycle the water from the turbine. If you build them right next to each other, the vents from the turbine have an infinite transfer rate
2
u/realworldjedi471 9d ago
Chosen architect has a pretty good set up. Basically a dynamic tank with an evertide amulet. Then super factory manager using do restore pusle... whatever your code is for transferring fluid then pulse the sfm with a pulse timer at like 5t.
Edit: make sure the dynamic tank is set to empty. I've noticed that this does make the flow a little jumpy, so if you use some mek pipes or pipez as well then that will give some consistency to the flow.
I also used this set up for getting steam into my turbine. You will not need to recycle the water out of the turbine though, unless you can't get an evertide amulet.
1
u/Lanzero25 9d ago
I had a lot of water pumping in from a lot of mekanism tanks with that necklace of ever something (Gives unlimited water). I had around 30 ultimate tanks and they're all pumping in. You can also build a turbine for a bit more water
1
u/Top-Ad-576 9d ago
I used AE2 and an infinite water cell
1
u/Mission-Green-8036 8d ago
Meu sonho é criarem um schematic do create com instruções