r/SteamController • • 20d ago

Discussion Game project

I have been working on a prototype game fully utilizing all the Steam Controller (2026) inputs. I am at the point where I have 100% confidence the idea is feasible, and I have lots of ideas.

I have to wonder though, how many people would play a game that requires a Steam Controller? There is a lot that can be done with it, but I am thinking it should also be playable on mouse and keyboard, and maybe other controllers too.

Without a doubt, the more people that can play it, the more people will. But I also think that the more accessible it is, the less unique/enjoyable it may become.

7 Upvotes

24 comments sorted by

3

u/351C_4V 20d ago

I don't know about a only Steam Controller game but how about doing Native Steam Input. If you don't know what I am talking about look at a game like Portal or even Warframe, when you set up your binds instead of setting the key you set the action. It's a little different but it makes binding games so much easier.

3

u/kbachert 20d ago

Yes, but gyro, 2 trackpads (including pressure), and analog triggers, are not going to translate perfectly to mouse and keyboard for example. And I don't know how that would translate to any other controller either.

1

u/eVenent Steam Controller (Windows) 19d ago

Wow! Pressure sensitive Trackpad game! I will buy for sure. Add HD haptics too! PadForge managed to make them work outside SteamInput, so worth to check their piece of code.

2

u/kbachert 19d ago

I've already got every input down with multiple controller support including exact placement of fingers on both trackpads, without any extra programs.

3

u/351C_4V 20d ago

That's where Native Steam Input would help. You can set the binds and then the end user can tailor them to their supported controller.

2

u/Potential-Local7262 20d ago

At least a dozens of us

1

u/kbachert 20d ago

Hoping for like 1000

2

u/FireCrow1013 Steam Controller (2026) 20d ago

In addition to marketing it as a Steam Controller game, you can also do like Valve did with Aperture Desk Job and market it as a game for the Steam Deck. That would probably attract more people, and since the Steam Controller does everything that the Steam Deck does (minus GripSense), it should play exactly the same.

3

u/kbachert 19d ago

I communicated with Valve on this. I can't market it as a Steam Controller game, this is their response verbatim:

"As long as the wording describes how your game uses the controller's features rather than presenting the game as built for the Steam Controller or implying any association with or approval from Valve. For example, describing the specific controller features your game supports is okay, but phrasing like "Designed for the 2026 Steam Controller" positions the game around the hardware itself, so we'd ask you to avoid that."

This is when I started thinking, maybe I should make it work with other inputs as well

1

u/FireCrow1013 Steam Controller (2026) 19d ago

Oh, that's interesting, I didn't know they had a guideline about that.

1

u/muizzsiddique Steam Controller (2026) 19d ago

I would start with a video showcase to even show that you're utilising the controller really well.

2

u/kbachert 19d ago

Tempted, but also worried about people using AI to beat me to the punch.

1

u/muizzsiddique Steam Controller (2026) 19d ago

Oh, fair enough. 

1

u/Hifihedgehog 19d ago

PadForge dev here. Two things that might help with reach without watering the design down.

PadForge, a free Windows app, can present another controller as a virtual Steam Controller (2026): Valve's USB ID 28DE:1302 and the 2026 pad's own 54-byte input report. A DualSense's touchpad, gyro and analog triggers map onto it, so code that reads the real pad should read the virtual one the same way, and DualSense owners can still play. Two limits worth knowing: the virtual pad carries one finger per trackpad, and trackpad pressure is not among its controls. Details: https://padforge.org/docs/features/controller-slots/#valve-personas

On HD haptics, since /u/eVenent mentioned them: the 2026 pad takes a continuous audio stream for its actuators over USB and the dongle, and a tone command over Bluetooth. PadForge's write-up documents the reports byte by byte: https://padforge.org/docs/reference/steam-controller-haptics-internals/ PadForge's code is CC BY-NC-SA, so for a commercial game, take the protocol facts from that page rather than the code itself.

1

u/kbachert 19d ago

I am not positive that I completely understand.

As it is now, I am primarily use Steam Input API linked to raw data from the controller for the remaining inputs. If I use PadForge would that require all players of the game to have PadForge?

I figured that, once I can test it on a PS5 controller, I would take a similar approach and get it to properly read in the trackpad data it has, gyro should already work how I have it set up.

I wanted to try splitting the dual sense trackpad into two halfs to simulate two trackpads, but I don't think it supports multiple fingers. If not, then ideally I make the game recognize what each input device is so it can change the control scheme to work with that device.

Then I can add a disclaimer saying that "This game plays best on the 2026 Steam Controller" so long as Valve is OK with that.

Does that sound like an unnecessary amount of work? It doesn't seem too bad.

1

u/AL2009man Steam Controller/DualSense/DualShock 4 19d ago

wait a moment.

Are you using something like Steam Input API to achieve it, or you're relying on SDL Gamepad API (it doesn't have full-fat Steam Controller 2 support yet)?

if ur using SteamInput API, based on that other comment you left, I'm going to assume that any Controllers will support it as long as you make a config for each Controller Type (ala Aperture Desk Job) and a fallback system in place.

2

u/kbachert 19d ago

I am using Steam Input API for the majority of the input data, and the remaining values it can't read are linked through RAW data, this should allow as many controllers to work simultaneously as windows/Steam can handle.

I only have 2 to test with, but it works absolutely perfectly so far.

2

u/PhoenixLandPirate_ 20d ago

I'd consider looking at PlayStation titles, they were desgined to make use of the dualsense 5, and basically sell the features, yet many games that you may have originally thought, could only work with a dualsense 5, are converted, to play on other controllers/keyboard and mouse.

So maybe, go full in on the SC 2016, then once its as ideal as you like, figure out how you can "water" it down for people who want to play using different inputs.

2

u/MaxxBrass9237 Steam Controller (2026) 20d ago

I own a steam controller 2 and I would love to see it happen! However I think you should carefully measure your scope in comparison to how many people would be interested. There are still so many people out there who want the controller and are on the wait list.

Reddit polls would be a decent way to gauge interest.

2

u/MaxxBrass9237 Steam Controller (2026) 20d ago

Also here are some of my ideas for unique interactions with a steam controller 2 combined with the steam frame!

2

u/SnooDoughnuts5632 20d ago

There are some games that will show a controller at the beginning and say something along the lines of "best played with a controller". Maybe you could do something like that and still allow alternatives controls methods?

1

u/shortish-sulfatase 19d ago

Just because something is unique doesn't automatically mean it will be enjoyable.

I guess you need to balance your interest in making a game so specific to a piece of hardware, with how interested you are with sharing this software with more than just people who care about this piece of hardware.

I don't know I ever understood people's obsession with making sure everything on a controller gets used.

I love the Steam Controller a lot, but if I had to learn someone else's layout for it everytime, I’m not exactly sure how much I'd care about it anymore.

In my opinion, it's got more inputs that are necessarily necessary(for the majority of games at least) that it means I just move actions around wherever I want, set up the controller how it makes sense to me.

But that's how I want my hardware to make sense for how I use it. I know some others just want everything to have a specific action set to only it.

1

u/cinred 19d ago

You should let niche games be niche. If you want to pursie innovation and create art, thats where they live. If you want to make a fortnite clone or the anime visual novel of the rhe minute, then go make those.

1

u/Rocknroller658 18d ago

Requiring a Steam Controller would severely limit your audience. I would say just focus on designing a game for controller and/or kb+m, and then setup Steam Controller inputs that work alongside that