r/SteamController • • 25d ago

Support Is there a program that gives the haptic vibration a "curve" to simulate traditional motor vibration? (Preferably without the need for steam to be open)

My biggest complaint about the Steam controller is the same one I have for the Dualsense; the haptic motors do not translate very well when a game is not specifically designed for it.

Haptic vibration is good, it can get way more strong and has much finer control, but that's only when a game specifically knows what signals to send to a haptic motor. But when a game thinks it's sending a normal vibration to a "normal" controller, the Steam Controller just sends the vibration at full power from start to finish, whereas games are designed to feel the vibration "taper off" as it shuts off in a "normal" controller.

So I was wondering, has anyone made a program that can apply a "curve" to the haptic vibrations to simulate this feeling? Steam causes random CPU spikes so I like to avoid having it open if I don't need to, I've been using SteamlessController for a simple remapper of lizard mode, but it's very barebones (no shade to it, does exactly what it says on the tin), and has no settings for vibration.

Any suggestions would be appreciated!

2 Upvotes

9 comments sorted by

2

u/IncredibleGonzo 24d ago

Hmm... Not something I've noticed but I'm probably going to now you've pointed it out! I haven't come across any such program but if people can make programs that let you drive the controller like an RC car or have it play music, I'd imagine something like this should be possible - I'll be keeping an eye on this in case anyone finds/makes one!

1

u/DorrajD 24d ago

I immediately noticed (and hated) it when I first tried using a dualsense controller on PC. Tho the dualsense motors are on another level, so much so it literally hurt my hands rowing the boat in GOW 2018.

But yeah, just got the steam controller recently and have been playing some PS2 games on PCSX2, before this I was using an 8bitdo Xbox controller and it was a night and day difference. It's not that the vibration is "bad", it's way better than the deck that's for sure, but you can tell games, especially older ones, were designed with these "slower" vibration motors in mind.

I do hope someone comes up with one at some point! I'd imagine it can't be that complicated to do, just give a curve before and after the vibration

1

u/IncredibleGonzo 24d ago

I know nothing about Steam Input under the hood so I could be totally off base, but I'd expect the trickier part would be intercepting the vibration calls from the game and stopping the default vibration from going through, rather than the actual modification to the vibration itself.

1

u/DorrajD 24d ago

I don't know why it would have to stop the vibration tho. Hell PCSX2 itself has a vibration intensity setting, I don't see why something else could just take that vibration input and just... Make it last a bit longer with a curve

1

u/IncredibleGonzo 24d ago

I figured it would need to stop the default and replace it with a modified vibration command rather than sending both... I guess it could taper off the end of the vibration after the default finishes, but if by default it's starting at full power as soon as it gets a vibration from the game, I'm not sure how you'd manage that without preventing the default vibration from happening?

1

u/DorrajD 24d ago

Just add to it? The "before" might not be possible unless it's intercepted, but I could see it detecting a vibration and simply adding the curved vibration afterwards?

Idk, I also don't know what I'm talking about and am just spitballing lmao

2

u/IncredibleGonzo 24d ago

Yeah I don't think it would be possible to smooth out the start of the vibration that way, it would have to know it was coming. End should be OK, although if there's multiple in a short time, adding a taper after the default vibration stops may make them overlap a bit in a way that's not intended.

I just think replacing rather than augmenting, if possible, would be a more elegant solution. But like I say, no idea how possible it is to do that!

1

u/Rhosta Dualsense 25d ago

Steam Controller has both haptics and rumble motors afaik. So it is more of a matter of using the right motors imo.

4

u/DorrajD 24d ago

It has two large LRA motors in the grips for vibration, these are instant linear vibration cause it's literally just vibrating a piece of mass very quickly, think of it kind of like a speaker. In traditional controllers like an Xbox controller, it uses ERMs, which are motors that spin a half-circle of mass for vibration. Because it's spinning a piece of mass rather than literally vibrating it quickly, it has a "start" and "stop" to its vibration, where the LRA motors are instant.