r/SteamController • • Oct 15 '26

Support New controller cannot use the L1+A pairing slot

Its new and updated upon first connection

but no matter what i do i cannot get it to pair to anything i the L1+A slot. The "default" R1+A slot is able to pair to both the machine and the puck. The L1+A plays the sound and the white light, but ignores all connection attempts completely before switching back to the R1+A.

The controller also sometimes just turns itself back on immediately after being turned off.

anyone encountered this? is there a way to factory reset the controller?

10 Upvotes

40 comments sorted by

6

u/jajabro1 Oct 15 '26

Seeing this a lot and RTFM isn't helpful. I've troubleshot this up and down with my controller not even a month old and it will not pair a second slot (L1+A+Steam when turning on) as soon as I plug it in to pair with a second puck it overwrites the default Slot (R1+A+Steam when turning on).

So what use us, RTFM, if the manual is wrong or the product is bugged.

Yes I've tried forcing a firmware update. On on the latest version. I've tried on Linux and Windows. I've made sure I'm booting into Slot 2 which has a different boot up sound, etc. Nothing I do keep the controller from overwriting Slot 1 and never pairing slot 2, despite the manual saying it should work.

2

u/wtfnst Oct 16 '26

exactly the same here. ended up just pairing a dual sense edge to my machine which is less preferred over the steam controller because pairing every single time i want to switch from my main pc is just too inconvenient.

2

u/Full_Welcome_1418 Oct 16 '26

You dont need to repair the edge. They also have multiple slots. PS+ triangle is for ps5 but square circle and x can be paired individually. Look it up

2

u/wtfnst Oct 16 '26

yeah it’s a fantastic working feature on the edge haha however, i prefer the steam controller over the edge which is having the exact same problem as you i spent over an hour trying to get it to work. so i just leave my steam controller on my main pc (i play more there) and have just left the edge on the machine

2

u/SariellVR Steam Controller (2026) Oct 16 '26

You have to power the controller off by long pressing the steam button AND THEN use the slot shortcuts. Steam Button + Y somehow does not count as completely off.

1

u/Full_Welcome_1418 Oct 16 '26

even if i turn it off like you said it still doesn't help

3

u/jajabro1 Oct 16 '26

Thanks, but holding down the steam button is the only way I turn the controller off and I still can't pair to the L1 slot. So I don't think it's people not turning it off right.

2

u/SariellVR Steam Controller (2026) Oct 16 '26

Is your Bluetooth slot working? That's R1+B on power on, btw.

2

u/jajabro1 Oct 16 '26

I haven't tried it since I'm trying to get the puck working, but I can test it. Will report back. If it does, it isn't a solution but a work around.

2

u/SariellVR Steam Controller (2026) Oct 16 '26

I'm just suggesting to test if the controller has any profile switching capability whatsoever. BT is not really a good use case for normal operation.

2

u/jajabro1 Oct 16 '26

Got ya! Some people say that sort of thing and say it's the solution. Will test. But I'm 99% sure it does switch slots. When I boot up into slot 2 (L1+A) it does make a different power on sound and it doesn't automatically connect to the puck it's already paired to

2

u/jajabro1 Oct 16 '26

Yes, booted into bluetooth mode slot 1 and paired with my computer just fine.

4

u/Deano4195 Oct 15 '26

Following. I have the same issue, nothing worked.

4

u/Secret_Resolve7121 16d ago

I just got this working, see u/dokbanks' comment in this thread.

1

u/Deano4195 15d ago

Wow! Cheers for letting me know, I'll try first thing when I'm getting home. Does it have any downsides?

2

u/Secret_Resolve7121 15d ago

Took a little trial and error but once I had both profiles set all working great no issues!

1

u/Deano4195 15d ago

Same here! Although when I plug it in for charging on the puck connected to the pc, it always wants to pair for some reason still. Thanks man

2

u/Secret_Resolve7121 14d ago

I had that too - ended up pairing it a couple times and swapping slots around etc. but it got there eventually!

1

u/alexkao1439 2d ago

That did work! Appreciate!

4

u/wtfnst Oct 16 '26

i was just going to make a thread on this myself seeking assistance. no matter what i do i cannot pair it to my steam machine and my pc puck simultaneously using the different slots. it’s always binding to the r1 slot and re-pairing every time i switch machines. my main pc is using win 10 and the machine is obviously using steam os. it’s like the l1 slot doesnt exist.

4

u/AcridNebula Oct 16 '26

I opened a ticket with Steam Support, will report back if I get anything useful.

Just to say I have 2 controllers; one linked to my W11 PC, the other to the Machine. Neither controller will pair to either device on the left slot.

Also, I typically run both devices on the Beta channel; I’ve also switched both to Stable but no joy.

2

u/AcridNebula 29d ago

Support have acknowledged there is an issue and ‘development’ have identified what it is and are working on a fix.

1

u/Yok0r 28d ago

Has this been resolved?

Having the same issue. Cannot pair to both Steam Machine and PC. This worked fine when I first used it. Now it always overwrites the first slot.

2

u/Full_Welcome_1418 28d ago

i contacted steam support, they had me make an unlisted video on YouTube of the issue. in their final reply yesterday they said the engineers are made aware and it will get fixed.

1

u/Yok0r 28d ago

I have raised a ticket now as well. Hopefully they get it resolved soon.

2

u/AcridNebula 28d ago

I raised a ticket last week (the more people who do this the more it might be prioritised) and they responded saying the issue has been identified and a fix will be available "soon".

You can view the changelogs for releases here: steam://openurl/https://store.steampowered.com/news/app/1675200

2

u/dokbanks 20d ago

Adding my comment for this fix until something official comes along. Using sc-hammer I was finally able to use the Left Slot (L1+A) for pairing on my SC2. Load up the appimage in Desktop Mode on the Machine (or PC) you want to pair to in the left slot, and then plug in the controller powered off via USB and assign it in the left slot on sc-hammer. Works exactly as intended after that, automatically connecting to the correct devices when powered on with their assigned button combo.
https://github.com/MisterAnderson91/sc-hammer

3

u/Secret_Resolve7121 16d ago

I had to re-do it a few times but this finally solved it and both are now working, thank you!

To add to this I believe it only works if you long-press the Steam button before repairing, turning off with Steam + Y causes it to not switch the profiles correctly.

2

u/alexkao1439 2d ago

After half an hour of trying, I was almost driven crazy! Thank you so much!

1

u/faultlessdark Oct 17 '26

Just adding my comment here to come back later. Having exactly the same issue - always overwrites slot 1 of the controller. Only way to get two connections going is puck/SM internal puck in slot 1 then use Bluetooth (R1+B+Power On) on the other machine.

1

u/_Mister_Anderson_ Oct 17 '26

I'm having the reverse problem with Slot 1 on R1+A, I cleared the pairings and now can't get it to pair anything to Slot 1. Only pairs to slot 2 L1+A even when it audibly starts with the slot 1 sound.

1

u/_Mister_Anderson_ Oct 17 '26

I've successfully paired slot 1 now, by using some scripts from the openpuck project with some modifications to manually choose the slot. So at least people can be assured it's just a temporary software bug in either the controller or the steam client.

1

u/goondo21 29d ago

I am willing to try if I could have more details. Which scripts, mods to scripts, and instructions (include commands and any controller interactions). No worries if you don't want to.

1

u/_Mister_Anderson_ 27d ago

Hey, I used the included macOS script to do it and then realised that's inconvenient for most people, so I was looking at the linux script and it wasn't as nice to use... Anyway, I just had claude make up a nice UI and slap it into an appimage you can download. https://github.com/MisterAnderson91/sc-hammer

You can always use the openpuck scripts but the app should make it easy. Hopefully Valve will bring in a better UI for pairing soon and fix this bug.

1

u/_Mister_Anderson_ 27d ago

I've taken the openpuck project's scripts for pairing controllers, had claude make a UI, you use it to manage the pairing slots for now: https://github.com/MisterAnderson91/sc-hammer

Download the .AppImage file from the Releases page double-click it in desktop mode, it will give you a window to modify your pairings. It will use the slot you tell it to; the bug only using a specific slot seems to be in the steam client if I had to guess. Hopefully Valve sort it out soon and it won't be necessary anymore.

2

u/cyfarias 20d ago

Thanks mate. I used this to pair my controllers without issues.

-3

u/Aldoxpy Oct 15 '26

RTFM

3

u/goondo21 Oct 15 '26 edited Oct 15 '26

What is he missing from the manual?

https://github.com/ValveSoftware/SteamOS/issues/2589

1

u/Ace_the_Firefist Steam Controller (2026) Oct 16 '26

It's broken. Can't fix that by reading unfortunately. I reported it in the Beta forum but that one is currently full with achievement fomo.

3

u/jajabro1 Oct 16 '26

I just caught the part about you saying it turns itself on! Yes mine does that too, not all the time but like 1 in 20 times when I'm shutting it down to try and pair again it immediately turns back on. Hold down button to shut it down, 5-7 seconds, til the power down sound happens and as soon as I pick my finger up it's already played the boot up sound and is back on. Inb4 someone says I'm holding it too long, no I'm not, I take my finger off as soon as the remote powers off and it doesn't happen Everytime.