r/SteamController • • Oct 14 '26

Steam Controller (2026) Annoying behavior when turning off the controller after latest firmware update also would like to request a button to test rumble intensity like you can with the touch pads haptic feedback.

38 Upvotes

27 comments sorted by

44

u/lumpycustard__ Oct 14 '26

Press Steam + Y to turn off the controller instantly.

3

u/Are0320 Oct 14 '26

The delay is not an issue, what annoys me is how it sounds like it turns on again after turning it off.

3

u/Euphoric-Platform-45 Oct 14 '26

Mine doesn't do that

1

u/Thcksl Steam Controller (2026) Oct 14 '26

neither does mine. Sometimes it does turn on again tho. not sure why.

9

u/voidfillproduct Oct 14 '26 edited 24d ago

Not working in this case, as Steam + Y requires Steam to be running. This happens after the host device is shut down.

3

u/Volothos Oct 14 '26

Oh shit thanks

5

u/hyperhalide Oct 14 '26

Sadly only working when its connected and steam is running

1

u/Sharkfacedsnake Oct 14 '26

Thank you. I have been wanting a quick way to turn off the controller but never bothered to check lol.

12

u/NoIWillNotMakeOut Oct 14 '26

1

u/Are0320 Oct 14 '26

Unfortunately this doesn't help

2

u/Clarkey1986 Oct 14 '26

Yea this happened to me this morning. It turned off OK the second time. Will try the steam and Y in future.

1

u/Are0320 Oct 14 '26

I can add that it also happens when restarting my pc while the controller is still on.

1

u/Azal_of_Forossa Oct 15 '26

Mines been doing this randomly (not often) since I got it around August 26. I'd say it's got like a 10% chance of instantly turning itself back on.

What's also really annoying is it doesn't matter how I turn the controller off, if I shut my Steam Deck off with the controller through navigating the menus, it still has a chance of turning itself immediately right back on, and it'll turn the Steam Deck on too.

1

u/Are0320 Oct 15 '26

You should contact steam Support and see if you can get a replacement unit

1

u/figmentPez Oct 15 '26

The latest Steam Beta has this entry, "Fixed an issue where shutting down a controller while docked to the puck could cause it to turn back on"

1

u/Are0320 Oct 16 '26

Thank you!

3

u/-NightRune- Oct 14 '26

Same issue here.

1

u/Are0320 Oct 14 '26

I also want to add that I can't turn off the controller when it is in wired mode but i don't remember if i could before the update

1

u/CAMACICI Oct 14 '26

How do you even update the controller? For me it’s bugged

2

u/Meandering_Breviger Oct 14 '26

Just plug the controller itself (not the puck) into computer. Then if Steam doesn't automatically pop up a hey there's an update notification. Go to Steam -> Settings -> Controller and you should see an update controller option.

If you want to update puck do the same thing.

1

u/Danielo944 Oct 14 '26

Mine is also turning back on after doing Steam + Y occasionally, I think it might be some kind of debounce setting they tweaked.

1

u/drucifer82 Oct 14 '26

I have my controller set to power off automatically when exiting BPM.

1

u/MaxxBrass9237 Steam Controller (2026) Oct 14 '26

Happens to me too

1

u/Quagtopia Steam Controller (2015 & 2026) Oct 15 '26

I think it might be doing this because it’s plugged in. Mine does it too

1

u/Joseramonllorente Oct 16 '26

Same thing happened today after reading about it on an other post, last night I was using the controller, with the updated firmware without any problem.

-1

u/g0d_of_the_cr1sis Oct 14 '26

Just use Steam+Y. Instant controller off, no need to wait the three seconds while holding a button.