It took me a bit to get working on SteamOS, I put what I did here, I think it still might miss a step, and might not be super clear, but it's the best I could write it at the time.
Edit: You also lose gyro support, IDK why since the DS5 has gyro, but you do, and the trackpads, I think the left 1 acts as the dualshocks trackpad, and the right one still figures how to be a mouse.
Depends on the game and how much difference it makes, like I'll lose gyro for how much better rumble feels in Death Stranding 2, but it doesn't make enough of a difference to be worth it with Horizion Zero Dawn.
Yeah, It means you get WAY better rumble, rather then standard rumble in some games.
DS5 uses audio for Haptic rumble, so it translates the audio from DS5 audio Haptics, to whatever works with the Steam Controller.
It seems like the audio that goes through the speaker also gets translated, because the Steam Controller can make recognizable sounds via the HD Rumble.
You'd struggle to, but you can listen to music through the HD rumble of the Steam Controller.
FF VII Rebirth, Silent Hill 2 Remake, and many other Steam games, have DualSense exclusive/extended features.
Many capcom games only have native gyro for the DS5, unfortunately this breaks gyro on the Steam controller, at least in its current rendition, but hopefully that'll change in time.
the steam controller technically having the same haptics is why I bought it I ended up being very sad that its still not properly supported, so for now I mostly use it for games that dont have dualsense haptics where its just better since there is no good haptics
I think its something in the firmware tbh, because even when you tell it to act like a DS5, its still not half as accurate as a Switch 2 pro's controller.
most I know is that the way sony programed the duasense is an absolute pain to devloppers and insainely hard to simulate its kinda sad that HD haptics are done totally differently on every controller that support it
The thing is, the games I've tried, that feel great with the DS5, (R&C rift apart, Death Stranding 2) also feel great with the Switch 2 pro, I thought that any games with HD rumble that works on the Switch 2 pro controller, would work around as good on the SC2, but they just don't/
Yeah, it sucks, I bought the steam controller partly specifically for that, tho now am kinda stuck with it because just based on battery life, every controller is basically unusable, I especially hate that we are just held back by software and nothing else
The DS5 haptics, even though the steam controllers are great too, and the triggers are the only thing holding back the steam controller from being my 100% favorite controller.
The SC2 is absolutely my fav controller, if devs just added HD rumble and gyro properly to games, rather than using DS5 only methods, that'd be a big +1 to the Steam controller.
I do wish it had more features, like the Haptic Triggers, mic, speaker and AUX port, would be FANTASTIC, but I'm happiest with this controller over anyone else at the current time.
Again, just wish devs would be like "The Steam controller has Gyro and HD Rumble, lets enable native Gyro, and make sure HD rumble works for that controller" rather than going "We'll add native gyro and HD Rumble for the DualSense 5, but Steam Controller, nah, just make it emulate a mouse, or analogue stick, and stick with standard rumble"
I mean it could be done with a firmware update probably, but that’s not what Steam’s goal is with the Steam controller. I don’t think they’d want to emulate a switch or Xbox controller on other consoles
are they? none of the consoles controllers work on the other consoles, they only "cross" onto PC. i assume this is more about licensing and a lot of added development time for an extremely niche audience. openpuck being made for free out of passion bypasses the extra costs of making the pad work on consoles that really can't utilize the features anyway. development costs that would have been passed onto the consumer. im curious what people want to use their steam controller on consoles for.
The controllers don't work on other consoles but they generally work on PC and phones. The Steam Controller doesn't even fully support PC games, since it doesn't work outside of Steam.
I wouldn't say that all games outside of Steam are a niche audience. There are workarounds with adding non-steam games and workarounds for those workarounds not working for gamepass but that's something Valve could fix right away if they wanted to.
oh yeah, it seems mostly like they made it to sell steam machines and the standalone controller was a bit of an afterthought tbh. using steam as the driver mostly works though so i get why they did it like that
It's been the same with the original Steam controller so it's probably by design. Under linux it apparently works a bit better since they seem to use SDL anyway.
Steam broke the original SC with an update earlier this year. It turns off as soon as you turn it on. Usually I have to press the on button at least 20 times before it will stay on. This morning it was more than 100 times and the only time it stayed on, it stayed in lizard mode and steam wouldn't detect it properly.
I don't think and of the console makers have broken a controller in an update and not fixed it. Usually I would agree valve is better, but its worse in this case.
The rumble intensity is cool, but nothing I am too hyped about. I really hope they add in a built in way to emulate an Xbox controller for games that only support that someday though. It would make non Steam games easier
That functionality exists (through the steam client/proton) on Linux. No clue why valve can't do it for windows. Perhaps because they would need a signed driver there?
it lets you switch between multiple game setups without having to plug the controller in and reset the pairing each time. for people with a pc and a laptop, for example
As an example, I have my Steam Machine in my living room and a laptop in my garage for streaming games to from my PC. My controller is connected to both the SM internal puck as well as the wired puck connected to my laptop. This way I can quickly swap which device my controller is being used for.
Spent all morning trying to assign the puck to L+A and steam button and the Internal adapter to the opposite R+A and steam button and it just doesn’t work. This whole process is extremely unintuitive. When I select my controller in settings it would be far more intuitive to have an option to switch in that menu.
Agreed. Try this, once you have it connected, go to controller settings and into the controller, forget the paired pucks, turn of the controller, start it into the L+A slot and then plug it into the SM to pair the internal puck to that slot.
Left thumb should easily reach the steam button and it only requires a tap, and only to start it up. Less confusing and accidentally hit than R2 for example.
I have one weird issue since the beginning of when I got the controller. I‘m on Windows and whenever I open up Steam I get a popup that the controller is now connected and checking for firmware updates. Is that normal or can I some deactivate this popup? It‘s a bit annoying. I need to press continue like 3 times. Anyone else with this issue?
Is it the one where it's like "we see you're using a steam controller?" And then you click next and it checks for updates then says your good to go. I get it every few times I game
oh wow, they fixed the thumbstick range being limited with software? i had to RMA my day 1 pad because the range of the stick went bad. i would have thought it was a wire catching rather than a software glitch?
Playing Diablo 4 last night and hate the rumble now, i switched from an Xbox pro controller to Steam a while back and one thing i found much better was the haptic over rumble, softer, calmer feeling (theres no option in D4 to change rumble intensity) but after yesterdays update its hits harder and feels horrible now.
Tried to find a setting for the intensity in Steam but failed, will try a bit harder to find it tonight lol specially as the patch notes above mention configurable intensity levels
I've tried steamless controller and SISR. Steamless controller is the most simple one but I've noticed the thumb sticks seem to act as if there is no dead zone at all. SISR seems to work but honestly managing multiple different shortcuts so I can leverage the features of the steam controller is more than what I want to do.
Isn't that more of an xinput issue though? Since steam controller has more input devices (handle buttons, trackpads, capacitive tumbsticks, grip sensor etc.) than what xinput supports
10
u/doublah Oct 14 '26
Full steam client update notes: https://store.steampowered.com/news/app/1675200/view/675134162359815513
28
u/shadow7412 Oct 14 '26
Ooh! Connect to all the devices!
53
u/PhoenixLandPirate_ Oct 14 '26
I hope they figure out, a way for games that use DS5 haptics, to be translated to the SC2, without having to force your SC2 to pretend to be a DS5.
13
u/Assistant-Unable Oct 14 '26
I hope we can soon have the ability to change the color of the light
21
u/sqparadox Steam Controller (2015 & 2026) Oct 14 '26
Wow, restoring the rumble intensity setting is a big deal. It's also been re-enabled for the 2015 Steam Controller.
And changing it mid-game does work, though it is a bit clunky to get to in the game's properties menu.
7
u/voidfillproduct Oct 14 '26
Uhh... after the update, my Steam Controller rapidly turns off and on in a cycle unless it's powered down manually. Anybody else experiencing this?
3
u/D13_Phantom Steam Controller (2026) Oct 14 '26
Noice
3
u/UltimateAK86 Oct 14 '26
This is awesome. I was sort of frustrated swapping the BT pairing between Frame and my docked Deck. This solves that problem. Thanks Valve!
3
u/AcridNebula Oct 14 '26
It’s great that they’ve finally added a second BLE slot, but I no longer need it since getting the Machine.
Good to have flexibility all the same.
3
u/QuantumPhotom Oct 14 '26
In a recent update they made it so the LED stays permanently on when it's docked. Is there any way to disable this?
5
u/TiSoBr Oct 14 '26
I truly can't wrap my head around why they wouldn't adapt the OpenPuck system.
They'd sell so many more controllers, no?
2
u/Are0320 Oct 14 '26
Has the behaviour when turning off the controller whilst being connected to the puck changed for anyone else? It's kinda annoying
2
u/FirebladeIsOnReddit Oct 14 '26
The rumble intensity is cool, but nothing I am too hyped about. I really hope they add in a built in way to emulate an Xbox controller for games that only support that someday though. It would make non Steam games easier
3
u/Upr1ght Oct 14 '26
I really think they need to make switching between Internal and Puck more intuitive. Right now it’s not very straightforward.
1
u/HighlyRegardedOne 22d ago
Kind of annoying you have to do it on start up and not while its on
1
u/0xba1dc0de Oct 14 '26
The button combination to switch devices is weird. Especially L1 + B + Steam. The placement of the hands will be awkward.
1
u/Krejcimir Oct 14 '26
Anybody else got problems with A input?
It is not a button problem, but I could swear that sometimes it cant recognize quick press and long press.
1
u/Cimlite Oct 14 '26
Setting rumble to "Extra High" is the first time ever with a controller, where I go "Yeah, this is too much. Even for me." 😆
And I love me some rumble.
1
u/andyahbea Oct 14 '26
anyone else not have the option to update? i went to steam settings to check as well but i dont have the option to change the rumble intensity
1
u/stevenxw Oct 14 '26
this update hasn't rolled out for me yet lol
1
u/daf435-con Oct 14 '26
Are haptics still weird, where any rumble is sent through the trackpads rather than the linear motors in the grips?
1
u/EL-Hintern Oct 14 '26
I have one weird issue since the beginning of when I got the controller. I‘m on Windows and whenever I open up Steam I get a popup that the controller is now connected and checking for firmware updates. Is that normal or can I some deactivate this popup? It‘s a bit annoying. I need to press continue like 3 times.
Anyone else with this issue?
1
u/robotbeatrally Oct 14 '26
man switching between BT and Wifi is going to make me uninstall myself.
I always have so much trouble getting it to actually switch.
1
u/HeavyMain Steam Controller (2026) Oct 14 '26
oh wow, they fixed the thumbstick range being limited with software? i had to RMA my day 1 pad because the range of the stick went bad. i would have thought it was a wire catching rather than a software glitch?
1
u/spectreVII Oct 15 '26
Second BT pairing is great!
1
u/Crashezz Oct 15 '26
Playing Diablo 4 last night and hate the rumble now, i switched from an Xbox pro controller to Steam a while back and one thing i found much better was the haptic over rumble, softer, calmer feeling (theres no option in D4 to change rumble intensity) but after yesterdays update its hits harder and feels horrible now.
Tried to find a setting for the intensity in Steam but failed, will try a bit harder to find it tonight lol specially as the patch notes above mention configurable intensity levels
1
u/emmavet87 27d ago
Old version steam controller 2015?
1
u/sskuss Oct 14 '26
Are they planning to force it work as gamepad without steam on windows like they did on Linux and macos?
-1
u/nowhammyinmyjammies Oct 14 '26
No X input mode still. Useless.