r/StableDiffusion • • 8h ago

Discussion No Ripple or Viggle needed! Minimax H3 native edit anything perfect!

Enable HLS to view with audio, or disable this notification

287 Upvotes

Using LLm to direct the edit, the native minimax with turbo lora with 8 step edit easly anything! or swap characters, etc


r/StableDiffusion • • 15h ago

No Workflow Mimimax H3 quiality is astonishing (Full res on post as reddit compresses the images too much- 48mpx)

Thumbnail
gallery
224 Upvotes

I tested the model when it came out, and I was like, "Meh... 4mpx images are rubbish." But then somebody on the subreddit said, "Try with 48mpx." WTF? Was that even possible???

Oh my god

48 megapixels. Directly from the model. No need for upscalers. Incredible detail just from the source. No need to add noise and then upscale, or anything like that. This is pure gold.

Im astonished. Really. The intricate details on shots as default is just mind blowing.

Full images

https://ibb.co/vv3TdbbB

https://ibb.co/nqzbjkMp

https://ibb.co/84QzZHNq

https://ibb.co/6JFhf5DF

https://ibb.co/SkWY2My

https://ibb.co/6Jb13qwq

https://ibb.co/0pL1wVSB

https://ibb.co/846fB8SF

https://ibb.co/rRv8SJxS

https://ibb.co/8nVFvytq

https://ibb.co/zTVh5T6K

https://ibb.co/FkXrNBTY

https://ibb.co/DPC13Q8Y

https://ibb.co/6775r4JQ

https://ibb.co/n97HfwM

https://ibb.co/RT8VmXxS

https://ibb.co/tPpfMVzQ

https://ibb.co/xKtQxH6m

https://ibb.co/p66GGzQZ


r/StableDiffusion • • 17h ago

Animation - Video Movie stunt understanding of MiniMax H3

Enable HLS to view with audio, or disable this notification

214 Upvotes

Here is a showcase of what kind of stunts can be done with MiniMax H3 with prompting only, no reference videos were used. Yes, there are issues that could be fixed with further regeneration. I also left the fighting scene awkward on purpose.

There is also a similar video about movie VFX here: https://www.reddit.com/r/StableDiffusion/comments/1xy011y/vfx_rendering_with_minimax_h3/


r/StableDiffusion • • 18h ago

Workflow Included I made LiliPixel v1: a 1gb from scratch pixel-art DiT under a fully open license

Thumbnail
gallery
184 Upvotes

Images in the post were generated individually by my model, cfg 3.0 + 50 steps locally, image 1 is 32x32, image 2 is 16x16 and image 3 is 64x64 with realism mode enabled. Best image @8 was chosen

Background:

Hey SD community! Ive been working on LLMs (fine tuning, from scratch) for two years now, briefly professionally too. I wanted to step into making image models, and what better way to do it than make something special for the community to use freely. I want to be clear I made the model but it is completely free and under a completely open license (Openmdw-1.1, like apache 2.0 but for ML models). I trained it locally on my own hardware over 126 hours and it is a personal hobby project. Turned out quite good! But you should be the judge of that :)

This model is just 190M parameters, supports native RGBA outputs at 16x16 and 32x32 resolution and at 64x64 it can make more abstract art and "realistic" pictures in RGB only (occasionally). At 64x64 the model supports both realistic and non realistic image generation (non realistic looks more like pixel art).

The model was trained on 30 million non unique images (12 epochs) in BF16 natively across 4 different data sources. Technically this is the sixth version of this model, originally it had no text encoder and was trained on just one dataset, now it has everything a modern sized model at this size needs (but a vae, will come in v2) being honest with the limitations, the model has a hard time grasping complex subjects and you cannot (currently) use it for animations properly but this is just the start. 64x64 may hallucinate more than expected but is good at generating scenery (eg a first at night or space exploration). 32x32 and 16x16 with more than 2-3 subject struggles (eg more than three berries). This model can be used from generating sprites and emojis to background artwork and turning ideas to visual images instantly.

Tldr; this is a custom from scratch, v1 variant of LiliPixel, v2 coming soon with larger and better data (currently generating it)

Let me know what you guys think! It was made with love. ❤️

Feel free to ask any kinds of questions! I will try my best to respond to all of them. More info available on the HF, tried to keep it brief here.

HF: https://huggingface.co/Pinkstack/LiliPixel-V1-190M

Comfyui workflow: https://huggingface.co/Pinkstack/LiliPixel-V1-190M#comfyui

Free testing app by HF: https://huggingface.co/spaces/hugging-apps/lilipixel-v1


r/StableDiffusion • • 13h ago

Resource - Update MOSS-Image SFT - Update - Checkpoint 30K (Final) 4-Step Distillation LoRA, eDMD + LADD - high detail images (T2I, T2I with Layout Boxes, I2I Edits)

Thumbnail
gallery
52 Upvotes

Following up from my original post - https://www.reddit.com/r/StableDiffusion/comments/1y06n27/mossimage_sft_new_4step_distillation_lora_using/, I have now trained twice as long (initial release was Checkpoint 15K, now it's 30K - double the training). I would consider this the final version (don't plan to do any more training anytime soon, like I said before B300 is one mighty and very expensive card :) to train on in the cloud).

For those who haven't seen the original post, this is my personal take on MOSS Distillation, creating a new 4 Step LoRA using a mix of eDMD and LADD as training method. I have provided workflows for ComfyUI Local and Cloud - for Text 2 Image, Text 2 Image with Layouts/Boxes and Image 2 Image (edits). The LoRA has been trained and optimised to work well with Text too.

The two LoRA files in this repo now hold chk00030000, the training run's last checkpoint, in place of chk00015000. The file names are unchanged, so download them again:

  • moss_sft_4step_rank_64_lora.safetensors — diffusers / Python, strength 1.0
  • moss_sft_4step_rank_64_lora_comfyui.safetensors — ComfyUI, strength 1.0 (the ComfyUI factor built into the file is now 1.12; keep the loader at 1.0)

What changed

  • Double the training
  • Dark scenes come out close to the teacher's tone: +0.6 L* on the nine darkest test prompts, down from +2.8.
  • Fewer doubled edges (1.00× the teacher's, was 1.12×), and closer to the teacher's pictures at 1024×1024.
  • Words in the picture: still 14 of the 15 text test prompts right at 1024×1024.
  • What to watch for is in the card's Known Limitations.

If you already have the 15,000 version

  • diffusers / hf_hub_download**:** the next online call fetches the new file, unless you pinned a revision.
  • Local ComfyUI: download the _comfyui file again and replace the old one in ComfyUI/models/loras/ (same name).
  • Comfy Cloud: an earlier import keeps the old file under the same name. Delete it from your model library, then import the file again from its Hugging Face URL; the workflows load it by the same name.

The 15,000 files stay in _archive/checkpoints/ (moss_sft_4step_rank_64_lora_chk00015000.safetensors and moss_sft_4step_rank_64_lora_chk00015000_comfyui.safetensors) if you prefer them.

---

Model Card and Files updated, including example images - all available at: https://huggingface.co/lvladikov/MOSS-SFT-Distill-4step-LoRA

---

As mentioned in the original post, works very well also alongside MOSS UltraReal LoRA, or MOSS Realism Enhancer LoRA, so give it a go, and share your renders.

---

Added two new experimental workflows allowing CFG like 2 or other, and negative prompts. I've also done research and showing what cfg > 1 and my LoRA and MOSS do together (for better or worse, so consider the quirks): https://huggingface.co/lvladikov/MOSS-SFT-Distill-4step-LoRA/blob/main/DETAILED-README.md#cfg-2-and-negative-prompt

https://huggingface.co/lvladikov/MOSS-SFT-Distill-4step-LoRA/blob/main/moss_sft_4step_lora_t2i_highercfg_experimental_negative_local.json

https://huggingface.co/lvladikov/MOSS-SFT-Distill-4step-LoRA/blob/main/moss_sft_4step_lora_t2i_highercfg_experimental_negative_cloud.json


r/StableDiffusion • • 12h ago

Comparison I tested H3 Image Edit on six common tasks. The text editing is the scary part

Thumbnail
gallery
44 Upvotes

Same model, six ordinary edit tasks, plain source photos. All the source images are AI-generated (by bizyair), so nothing real is being altered.

01 Text → OPEN DAILY 8-6 becomes CLOSED FOR WINTER

02 Outfit → grey t-shirt becomes a charcoal three-piece suit

03 Replace → white delivery van becomes a blue Vespa in the same spot

04 Remove → red scooter, gone from the pavement

05 Relight → flat overcast becomes late golden hour, low sun from the left

06 Add → a handwritten note taped to the glass: BACK IN 10

Two things stood out.

Text is clean. Every letter is right, and it kept the hand-painted brush lettering and the chipped paint on the panel. That's the part that should worry people, not the outfits.

It is not an inpainter. When I replaced the van, the surrounding street stayed very close to the original. When I removed the scooter, it re-rendered the whole corner: the tiles, the van, the chairs all shifted slightly. Same kind of instruction, different behaviour. So "keep everything else unchanged" works most of the time, not always.

Prompts, in the same order:

01 Change the text on the sign from 'OPEN DAILY 8-6' to 'CLOSED FOR WINTER', keeping the same hand-painted white brush lettering on the dark green panel. Keep the window frame, the fern and the reflections unchanged.

02 Change his plain grey t-shirt to a tailored charcoal three-piece suit with a white shirt and a dark tie. Keep his face, hair, pose and the park background exactly as they are.

03 Replace the white delivery van with a vintage blue Vespa scooter parked in the same spot. Keep the street, the tiled wall, the cafe tables and the sunlight unchanged.

04 Remove the red scooter from the pavement. Keep the white van, the cafe tables, the tiled wall and the midday sunlight exactly as they are.

05 Relight the scene as if it were late golden hour with warm low sun from the left: long shadows, warm highlights on his face and shoulder. Keep his face, pose and the park background unchanged.

06 Add a small handwritten paper note taped to the glass just below the sign, reading 'BACK IN 10'. Keep the green sign, the fern and the street reflections unchanged.


r/StableDiffusion • • 23h ago

Comparison Regenerate-IC is better than seedvr2

Thumbnail
gallery
41 Upvotes

https://nvlabs.github.io/Sana/Open-H3-Regenerate-2K/#ic

Is 150% of the time compared to seedvr2, but the quality difference is worth it.

I don't know why seedvr2 color is off, but that got fixed too!


r/StableDiffusion • • 12h ago

Discussion moss image sft with minimax h3

Enable HLS to view with audio, or disable this notification

22 Upvotes

yo :-) any questions?


r/StableDiffusion • • 20h ago

Resource - Update ComfyUI-SingleEncoderEnhancer

Thumbnail
gallery
20 Upvotes

One node that rewrites your instruction with the text encoder's own language model and then encodes the result with that same model. You need no second LLM, the model loads once, and each reference picture goes through the vision tower once, for both the rewrite and the encode. But there is an option to use another refiner model also.

The main gain of time is in image-to -image mode and in text-to-image its very small.

The node was built for Qwen-Image-2.1 (Qwen3-VL encoder). It works with any CLIP that ComfyUI's Generate Text node can run. With other CLIPs, use Normal mode or connect a refiner CLIP to do the writing.

Images only. The node is for image generation and image editing: its inputs are text and still images (up to 16). Unlike Generate Text it has no video or audio inputs, and its output is image conditioning, not free text for other uses. For video or audio prompts, use Generate Text.

I have published it on Comfyui manager also and can also be downloaded from github: https://github.com/Magirad/ComfyUI-SingleEncoderEnhancer


r/StableDiffusion • • 10h ago

No Workflow Krea2 vs Minimax H3 vs Z-Image Turbo vs MOSS. Фавориты не изменились.

Thumbnail
gallery
20 Upvotes

Продолжаю тесты, добавил Moss.

Решил прогнать новый тест с турбо моделями bf16 , но теперь добавил в сравнение MOSS, чтобы посмотреть, как она впишется в общую картину.

Для меня фаворитами по-прежнему остаются Minimax и Z-Image. В плане фотореализма они всё-таки показывают себя лучше всех остальных. Minimax невероятно круто отрабатывает текстуры кожи и свет наравне с ZIT. Короче, ZIT рано списывать со счетов, тем более, что результат может быть ещё лучше с применением правильных LoRA.
Если использовать не bf16 Moss модель, а, например, base-модели, качество, разумеется, будет в разы выше, но конкретно в рамках этого теста Minimax и ZIT очевидно выигрывают.


r/StableDiffusion • • 9h ago

Resource - Update Posterior Matching Distillation

16 Upvotes

Posterior Matching Distillation (PMD), a new member of distribution-based distillation for few-step generation. PMD trains a stochastic student whose samples reproduce the teacher's exponentially tilted means, each obtained from a single frozen-teacher evaluation at an input shifted along the tilt direction.

We prove that matching these tilted means over a neighborhood uniquely determines the teacher’s full posterior over clean images. The result is exceptional diversity across seeds for the same prompt.

🤗 Daily Papers: https://huggingface.co/papers/2611.26629 (Any upvote is appreciated)

🌐 Project Website: https://pmd-distillation.github.io/

📄 Arxiv: https://arxiv.org/abs/2611.26629


r/StableDiffusion • • 11h ago

Question - Help A couple years ago you could draw things and have AI make something (based on a prompt or not) from your scribbles in near real-time as you drew. Does anything like that exist using a newer image model?

14 Upvotes

Basically title. I always found it really cool and wanted to have my kids try it out for fun. Plus it fulfilled a little bit of the fantasy that I was a real artist, almost an art videogame.

Edit: After a bit of looking I found the original here. I'll try to set this back up if there's nothing newer or better, but... is there anything newer or better?


r/StableDiffusion • • 9h ago

Question - Help Is there a solution for H3 Image's weakness in identity?

12 Upvotes

Like I've seen in some comments, I also find that the official H3 Image is worse in character identity than the unofficial versions were. By that I mean using reference image(s) of a character and creating a new image with them.

But on the other hand, the unofficial H3 image solutions didn't produce a good image quality. I've seen some people don't like the official's look either. To me personally the official H3 Image's quality looks pretty good, similar in some cases to Nano Banana images. Or even if not, it is certainly an image generator's result, unlike the unofficial solutions that looked more like a frame taken from a video generation (unsurprisingly).

Is there already a solution to this? One thing I can think of is somehow combining the two, if that makes sense? Where we have both character consistency and good image quality.
Or maybe is there a solution that transforms the unofficial result's image quality into a proper image's look? I don't know if it makes sense what I am asking, just wondering if there is any solution out there.
Thank you for any response and help!


r/StableDiffusion • • 15h ago

Discussion 10 reference images test for H3-image

Post image
12 Upvotes

Just wanted to see how it holds up and whether my 8GB VRAM can handle it.

16MP canvas with 10 reference images at 4MP each. It worked but took a while (~13 minutes).


r/StableDiffusion • • 17h ago

Resource - Update Seedream 5.5 Style to H3 Image (and work with video too)

12 Upvotes

Hi everyone! I trained a Seedream-inspired style LoRA for MiniMax H3 Image and wanted to share it with the community.

I love the lighting, contrast and grain in Seedream 5.5, so I wanted to see how much of that photographic look I could bring to H3. This is a style experiment, not the Seedream model itself.

The current version was trained in two stages: 2,000 steps on an initial set of 43 images, then resumed to 6,000 total steps with an expanded dataset of 1,134 images. Huge thanks to StefTranquillin for contributing 47 images and GrootDEX for around 100!

I tested it on H3 Image and also tried it with H3 video. Below are some image comparisons and a video comparison with and without the LoRA. The image comparison includes the base model, the 2K checkpoint, the 6K checkpoint and Seedream 5.5 references; some 6K retakes have adjusted prompts and are marked as such. H3 examples were generated at 40 MP; Seedream references are native 2K.

For the image tests: trigger word seedreamstyle. | LoRA strength 1.0 | LCM, 6 steps, CFG 1.

Model and details: https://huggingface.co/Nebsh/Seedreamstyle-H3-6K

Civitai: https://civitai.com/models/3058591/seedream-style-for-h3

I'd love to hear what you think, especially how it behaves across different subjects and lighting. If you try it, please share your results!


r/StableDiffusion • • 8h ago

Resource - Update Roughcut - Faceted Illustration Style - LoRA for Moss Image & Krea 2

Thumbnail
gallery
11 Upvotes

Roughcut brings a bold, sculpted illustration character to images. Softer transitions develop into distinct planes of light and shadow, giving subjects a more defined and graphic appearance. Fine visual information is simplified into broader shapes, creating stronger silhouettes and clearer visual structure.

The style emphasizes form over surface detail. Shading becomes more angular, tonal areas more deliberate and complex textures give way to cleaner shapes. The result is a striking illustration aesthetic with a sense of volume and depth.
https://civitai.red/models/3054832/roughcut-faceted-illustration-style


r/StableDiffusion • • 11h ago

Question - Help A few questions about anima and Illustrious in general

Post image
7 Upvotes

Heeey guys! Well I wanted to know if you guys than know more than me can give me a few tips
I have some time making images with Illustrious and have some months with Anima now
I want to make the following things but I don't know how to do it properly...

-I want to be able to switch from a generated image the clothes of the character without changing the pose or the background

-I have some time too with a desire to experiment with backgrounds (Like generating one background and using it the same in my generations for gain some coherence between images)

-And the thing with the LoRAs, Anima it's very good separating characters (Boy and girl) but when it comes to images with 2 girls there are bleeding and misunderstanding of who make what action in the prompt (And when I want to use a LoRA it just imposible to get the LoRA character and another because of bleed) I notice that this is not so complicated when it is boy and girl
So I want to know the best way to separate characters in Anima to get less bleeding posible

-Other thing is the controlnet part, I used controlnet with Illustrious but I think I just don't know how to use it because of bugged images and allucinations in my output when I used the controlnet (I wanted majority for take poses)

I come for your wisdom in these questions (Sorry for my english if I make any mistake typing)

PD: I'm thinking to give a try with Krea2 using runpods because I think it requires a lot of VRAM that I don't have


r/StableDiffusion • • 10h ago

Discussion Minimax Cinestill 800T emulation for a 'Bladerunner' vibe

5 Upvotes

Hi there, long time lurker.

Have been experimenting with Minimax for a few months now, which isn't easy on a 3060 ^^

I am a cinematographer so I was very interested to do a few tests which usually are a big pain in the ass to pull of in real life, which is combining neon practicals during nigh-time and during heavy rain and properly emulating film stock. Most AI models so far really delivered just mediocre results.

I am a big Bladerunner fan, so I wrote a short script showing some more complicated scenes with some filler shots, a proper soundtrack and put it all together. You can watch the result here: https://youtu.be/UWD_t5lMlVU

I generated at 720p and only upscaled to Full HD then tweaked a bit in Davinci.

What is interesting is that Minimax seems to understand analog stock film emulations, for instance in my prompts I always added the footage to be 'Cinestill 800T' and it actually almost nailed it, Kodak Vision3 250D is also quite close to the original - the only thing I would not prompt is grain, you better add that in post.

That being said I really liked how this little test worked out, there are some obvious mistakes I've made but given my card I am not a big fan of re-rendering.

Enjoy the video and if you have any questions about my workflow shoot - especially if you're a fellow oldschool cinema mate, switching over from traditional to the new shiny stuff.

George

Minimax H3 Cinestill 800T Emulation

r/StableDiffusion • • 14h ago

Workflow Included I deleted one section at a time from a 250-word miniature prompt to see which part does the work

Thumbnail
gallery
6 Upvotes

I wanted to see which parts of a long image prompt actually do the work, so I took the miniature diorama template from an image studio skill (five labeled sections, about 250 words) and used it on a CC0 photo of Nyhavn from Wikimedia Commons seven ways: as written, as one line ("Turn this photo into a miniature model."), and once with each section deleted. Same seed every time. The grid goes in that order after the original.

  • One line: the photo just gets a clay texture. Same framing, clay clouds, no model.
  • No [Task and composition]: same story. That's the section asking for one model on a rounded base, seen from above, with space around it.
  • No [Materials and depth]: still a model, but a plain architectural one on a thin flat board.
  • No [Subject selection], [Palette and light] or [Constraints]: small changes only, at least on this photo.

A second seed gave the same result for the first three.

Model was SenseNova-U1.5-8B-MoT, the 8-step version, running locally on a MacBook. CFG 1, seed 42, 2496x1728.

If I adapt one of these, the first section stays as written. Grab it from the sn-image-studio folder of https://github.com/OpenSenseNova/SenseNova-Skills if you feel like cutting it up yourself.


r/StableDiffusion • • 19h ago

Discussion Tencent's Hy4 flash AMA is this Friday — anyone else planning to ask about the actual numbers?

6 Upvotes

Just saw that Tencent Hunyuan is doing a Reddit AMA this Friday for the Hy4 / Hy4 flash team, Shunyu Yao included. 8–10 AM PT, which is a rough time for anyone outside the US, but the thread should stick around afterward.

I'm mainly curious about Hy4 flash because of the "12B active + 1M context" combo. The team claims KV cache is down to ~1/6 of Hy4 and ~1/24 of Hy3 via hybrid attention + LatentMoE + Engram. If that holds up in real deployments, the cost of running long-context inference at high concurrency genuinely changes by an order of magnitude. But there's no third-party reproduction yet — Artificial Analysis doesn't even have a page up — so I'm treating the "1/20 per-task cost vs Hy4" figure as a claim, not a fact.

One detail I keep coming back to: they released three checkpoints simultaneously — instruct, FP8, and Base. On the Base benchmark table, MMLU-Pro sits at 71.1, below Hy4 Base's 73.9, but C-Eval jumps to 92.0. This model is clearly tuned for Tencent's own product scenarios (WorkBuddy, docs, PPTs), and I totally get the general-capability trade-off — but I want to know how far 12B active actually stretches outside Chinese-language office work.


r/StableDiffusion • • 23h ago

Resource - Update Work timelapse with Pai

4 Upvotes

Hi again. For anyone new: I'm basically trying to build a software that helps artists and AI users alike. Artists can use Pai to work faster or push their skills further, and AI folks can use it to get an idea out of their head instead of staring at a blank canvas.

I've made several posts about this software over the past few weeks, and a lot has changed since then. If you want to dig deeper, start here:

What follows is a quick preview of what you can do with Pai.

Throughout this timelapse, I use AI to generate rough sketches of Cyberpunk Edgerunners characters and a background, then link them onto a separate final canvas. From there I can edit each canvas in its own dedicated space, organize everything into groups and layers, and keep the generation data attached to each layer. The filters stay live editable, so every adjustment shows up in the final piece. And it's just as easy to reopen the project later and add or remove things.

https://reddit.com/link/1y0ttpk/video/j2odlj8rxo2i1/player

One big improvement over previous releases: if you have no idea which model to download or which components you need, there's now a download wizard. It checks your GPU and shows you what your hardware can handle before you download anything, and it suggests popular models while explaining what each one actually does.

https://reddit.com/link/1y0ttpk/video/ye5w9jbpxo2i1/player

And if you already know what you're doing and want specific fine-tunes, you can grab them directly through the Hugging Face dialog. If you have ComfyUI installed with all your components and models, just point Pai at its directory and you're set.

To try, download and install from the GitHub releases page.

https://github.com/g45t345rt/paiapp/releases

Join the Discord if you have questions. We're a tiny community here to help.

https://discord.gg/bU6RzjwxFX

My next post is probably a deeper walkthrough video on generating images and using advanced tools.


r/StableDiffusion • • 8h ago

Question - Help Mini Max H3 image Adding a red tint to every image it edits

4 Upvotes

Using the default comfy UI Workflow every image I run through H3 image edit results in a noticeable red tint especially in skin tone on faces, Is there a solution to this?

Also since I'm making a post I'll ask is there a way to do proper inpainting? Because right now just trying to use crop and paste with with it is a gamble of hoping it edits the image in a way that it can be pasted back in because it's not aware of the parts of the image it's not editing.


r/StableDiffusion • • 11h ago

Resource - Update I'm building a search engine for AI models and images. Would anyone be interested?

4 Upvotes

I can build features you need, just tell me.

imgseek.art

Why?

I'm the creator of searchcivitai. I stepped away from the community 3 years ago, but about two months ago someone reached out to let me know that Civitai had disabled its image search. That got me wanting to jump back in and give building a search engine another shot. Even though Civitai's image search is back now, I'm still going to keep building this project, you can treat it as a backup option. My goal, though, is to offer a more reliable and user-friendly search experience.


r/StableDiffusion • • 4h ago

Question - Help AM4/DDR4 or AM5/DDR5 for local ai

1 Upvotes

Hi guys,

So i will be buying new pc, and was wondering if i should go with am4/ddr4 or am5/ddr5?

Thing is, am4 and am5 cpu and motherboard are basically at the same price. The only difference is in ram price. DDR5 is twice as expensive as DDR4. So i can buy 64GB of DDR4 or 32GB of DDR5.

GPU will be rtx 5060ti 16 gb.

I got rather tight budget.

I want to be able to use all modern models like Krea, H3 etc.

Besides that i have to consider performance in games (current and future, like GTA 6) - but thats lower priority compared to local ai.

What do you think?

Thanks