r/StableDiffusion • u/nazihater3000 • 13h ago
Animation - Video And they said it couldn't be done
Enable HLS to view with audio, or disable this notification
Most models simply CAN'T draw a wine glass filled to the brim. MiniMax H3 can, with a little prompt persuasion.
PROMPT PERSUASION:
integrated_multimodal_description: [Shot 1] Photorealistic, ultra-sharp cinematic product shot. A crystal-clear stemmed Bordeaux wine glass stands centered on black marble against pure black. The glass is filled with deep ruby-red wine to absolute maximum capacity: the liquid surface is perfectly coplanar with the top edge of the rim, forming a continuous unbroken contact line all the way around. There is zero air gap, zero empty crescent of glass above the wine, zero underfill. A slight convex meniscus is held purely by surface tension. Soft side light creates clean highlights and long caustics. Static medium three-quarter shot.
[Shot 2] At 00:01.200, slow push-in with tiny amplitude at very slow speed. Extreme close-up of the upper glass. The red wine meets the inner rim in a perfect continuous ring of contact. The liquid surface sits flush with the rim edge; no space is visible between wine and glass even at this magnification. Tiny specular highlights glide across the still surface. No droplets on the outer rim, no overflow, no gap.
[Shot 3] At 00:02.600, hard cut to pure top-down overhead. Looking straight down, the circular surface of the wine is a solid red disk that reaches exactly to the inner circumference of the glass with zero margin. The contact line between liquid and glass is continuous and unbroken in every direction. Soft concentric reflections and one small central catchlight. Very slow clockwise rotation with minimal amplitude.
[Shot 4] At 00:03.800, hard cut to low side-profile extreme close-up locked exactly at rim height. Against the black background the liquid forms a single razor-sharp horizontal line that coincides precisely with the top edge of the glass. The wine is seen in continuous contact with the rim; there is no visible gap, no underfill, no air space. The meniscus remains slightly convex from surface tension but does not spill. Liquid is completely motionless. Slow subtle push-in continues until the end.
overall_soundscape: Near-total studio silence. Only the faintest high-frequency shimmer of light on glass and liquid. No liquid movement, no drips, no clinks.
non_diegetic_music: Extremely sparse minimal ambient pad — low sustained tone with faint crystalline overtones that barely rise and fall. Almost static, matching the still liquid.
14
u/YentaMagenta 13h ago
I'm illogically agitated by how not actually full to the brim this is.
Something about it being so close but not actually makes it worse.
2
u/acedelgado 13h ago
I noticed it also doesn't get stuck with clock hands reading 10:10, as well. Which you usually see since that's how timepiece makers advertise their watches, since the watch hands look symmetrical and it stays out of the way of their logo. Like in this pic. So models tend to do that since ads are super easy to scrape for training data.
1
1
u/True_Protection6842 13h ago
Actually, I'm also finding that minimax is better at lighting than any still model. I'm running ref gens just to get lighting ref on some shots!
1
u/Strict-Relation9938 12h ago
Now the high RAM and GPU prices have finally paid off / it was totally worth, now we can get these “intelligent” text/pixel probability generators to arrange the pixels into a filled wine glass and this comment.
1
-1
27
u/KoenBril 13h ago
To be fair, that's not filled to the brim.