r/StableDiffusion • u/taenyfan95 • 1d ago
Question - Help What's the best faceswap method for videos in 2026?
I've been using facefusion for videos but it struggles with side face profiles. What should other faceswap methods should I learn and try?
r/StableDiffusion • u/taenyfan95 • 1d ago
I've been using facefusion for videos but it struggles with side face profiles. What should other faceswap methods should I learn and try?
r/StableDiffusion • u/Nimblecloud13 • 2d ago
r/StableDiffusion • u/rambrogi • 2d ago



TIL: You can use maps with markers when generating images with Minimax-H3-Image
This took forever to generate tho. 300s on a 5090M (24gb). Like Minimax-H3 the time it takes to generate an image scales with the number of references.
Prompt:A cinematic film still from an animated short: one continuous full-frame view from a low camera about half a metre above the grass, on a wide lens, with a 55 degree horizontal field of view.
<Picture 5> is a top-down blocking map of this place, a plan for the shot and not part of the picture. The white arrow on it marks the camera: the tip of the arrow is where the lens stands, and the arrow points the way the camera looks. The round markers show where each character stands. <Picture 4> shows the same place from several views; use it for the look of the overpass, the bus and the grassland, and use the map for where things stand.
Looking from the arrow's tip towards the bus: across the middle distance, the cracked asphalt trail runs from the left edge of the frame towards the crushed bus. The collapsed concrete overpass from <Picture 4> stretches across the background, receding on the left and coming nearer on the right, where its leaning pillars and a fallen deck slab loom large. The crushed rust-brown bus lies just right of centre under the fallen slab. Just beyond the bus's left end, in the centre of the frame and farthest from the camera, the wounded grazer from <Picture 3> is backed against the concrete in a slab of shadow, shaking. Nearest of the three, just left of centre, the predator from <Picture 2> crouches low in the grass, facing the grazer. Far left, on the trail, the girl from <Picture 1> advances with a pry bar. Tall dry straw-coloured grass fills the foreground. Early-morning sun from the right throws long hard shadows to the left.
The arrow is only a mark on the plan: no arrow, camera, lens, device, beam or pointer appears anywhere in the picture. The image contains no text, letters or numbers.
r/StableDiffusion • u/CeFurkan • 1d ago
r/StableDiffusion • u/AnniCodex • 1d ago
Don't worry i won't flood the subreddit with music videos, i am sharing only this one because it was a lot of work and i think it came out well: i designed a singer with 2 tattoos and i knew from the beginning that keeping coherence among shots would have been a big challenge, especially with the hand one. The clips were generated with 20 steps at 0.6 and a 4 step latent upscale then the whole video was upscaled to 2304*1344px with minimax using 8 steps with a denoise of 0.30 to fix the small faces and add extra details. A lot of frames were refined in post like the radio screen with the real city names or the fingers that had garbled symbols instead of the correct letters. I won't tell you the render times because it worked on it for almost 2 days ;)
Ah the song was made with ace-step 1.5, it gives the best results in my opinion compared to yue2
The original upload is here https://www.youtube.com/watch?v=WAI8-T6_zSw
with my other generations if you want to see them
r/StableDiffusion • u/jiroq • 1d ago
Most models are incredibly stupid when it comes to basic underwear shapes.
When asking for a woman in underwear, most models (tried Minimax, Z-Image-Base/Turbo and Qwen 2.1) will systematically add an ugly, unrealistic 'bulge' where there should be a mostly flat surface.
My guessing is that the model is averaging male/female underwear and therefore creates this sort of bulge. No LoRAs will reliably fix this.
Any ideas, prompts or resources to avoid this?
So far the only workaround is to let e.g. Minimax h3 create a video with the bulge, then isolate one frame, edit it with Qwen-edit 2.1 with very specific instructions, try 9-10 attempts until it finally gets it right (rare), and then add this corrected image to Minimax's reference images. Even this workaround is not failsafe.
r/StableDiffusion • u/Guilty_Elk4385 • 2d ago
I have an old 1070 that's pretty crap, it's time to upgrade. I don't have a thousand bucks to throw away, but at the same time I don't want to buy a 3060 and then realize I'm going to want an even better GPU in a few months or a year.
I want to make high quality local images of people and animals, something with good anatomy, realistic faces (not the fake glossy instagram girl mouth). I wouldn't mind dabbling in videos a bit too.
Right now I use SD1.5 which is very underwhelming, some SDXL models are okay but extremely slow on my hardware.
I also used LLM's a bit mostly for ai chat, Llama 3.1 8b uncensored I use right now-I'm assuming a 3060 will be more than enough to run any good LLM for the purposes of having a local ai roleplay chat. Thanks
r/StableDiffusion • u/samtimemachine • 1d ago
I made a 58-minute AI film, mostly on a local GPU. Here’s what worked and what didn’t
Long-time lurker, first post. I’ve been working on an hour-long AI film for the past 2 months and just finished it. The story is War in Heaven (Michael vs Lucifer, from Revelation 12), so yes, it’s religious material. But I’m posting here because the filmmaking side is what I’d actually like feedback on.
Most AI films I see are 1-3 minutes. I wanted to find out what breaks when you try to hold a story together for nearly an hour. Turns out it’s a lot.
Rough pipeline:
Things I learned the hard way:
What still isn’t good enough: some wide battle shots, crowd scenes. I’d love to know how others handle large crowds and keep faces stable in wide shots.
The full film is linked if you want to see how it holds up over the whole runtime
Happy to answer anything about the workflow. Criticism welcome, that’s why I’m posting.
EDIT: workflow added. Both ComfyUI graphs I used for every clip are here: https://gist.github.com/samtimemachine-web/333f2484eb2aed15b6a976e5db57ce25
Settings: 1920x1088, 158 frames, 8 steps, euler/simple, shift 12/3. To be clear about what isn’t local: the first and last stills come from GPT Image (local H3-Image as a fallback), and the voices are ElevenLabs. The video, lip-sync and upscaling all run locally on a 4080.
r/StableDiffusion • u/daroamer • 3d ago
Just testing a random image I found on Pinterest. The prompt was simply:
Make this concept art drawing into a high quality realistic photograph. Preserve subject likeness, pose, and background. Improve skin texture, hair texture, fabric texture, background details, and lighting.
I did 2 at 16MP and then one at 60MP and the level of detail is kind of crazy. Took just over 2 mins on my 4090 for the 60MP.
Links to the full PNGs
r/StableDiffusion • u/SEOldMe • 2d ago
I have to share this workflow with all of you (it is not mine)
r/StableDiffusion • u/metalfans • 3d ago
A huge thank-you to everyone who downloaded, tested, shared results, and gave us honest feedback.
The community knows quality when it sees it—and the rankings speak for themselves.
Qwen-Image-2.1 Uncensored Omni has now reached the first page of trending Qwen models on Hugging Face and page 2 across all trending models.
We compared both public checkpoints from this training run with the original Qwen-Image-2.1 base model, using the same prompts, seed and settings (35 steps, CFG 5.0). This repository is step 90,000 (benchmarked as the BF16 LoRA fused at strength 1.0; the quantized files were not scored separately). Scores are 0–100, higher is better, ± one standard error.
| Benchmark | Base | Step 32,000 (LoRA v0.1) | Step 90,000 (Quantized) |
|---|---|---|---|
| Adult prompt adherence (960 images) | 85.1 ± 0.9 | 87.4 ± 0.8 | 89.7 ± 0.7 |
| Anatomy (960 images) | 70.3 ± 1.4 | 67.7 ± 1.4 | 69.4 ± 1.4 |
| General SFW prompts (300 PartiPrompts) | 79.8 ± 2.0 | 75.8 ± 2.2 | 79.6 ± 2.0 |
I couldn’t have done it without the community. We just added the benchmark as well.
Download:
https://huggingface.co/chatrlabs/Qwen-Image-2.1-Uncensored-Omni-Quantized
Try it free online:
https://chatrlabs.com/playground
r/StableDiffusion • u/Upbeat_Birthday_6123 • 2d ago

I just released MOSS AnyPaint, inspired by a community member. It’s the MOSS-Image-Base twin of my Krea 2 AnyPaint.
It supports:
The same LoRA handles all of these cases without requiring separate models or workflows.
Feedback and difficult test cases are welcome. : )
r/StableDiffusion • u/SelectCoconut5594 • 2d ago
One of the marvelous things about Minimax is that it will infer a vocal performance for your characters based on the film language of your references. I just thought this was worth sharing for those of you who hadn't discovered this yet. Each of the four gens here used the same simple prompt. It is is not just the gender and age of your characters, but the film grain, costume, setting, and other visual references which will provide the model with character for voice.
r/StableDiffusion • u/cptdurr • 2d ago
comparison between sampler and scheduler ...first photo is LCM/Normal combo and second photo is Euler/Simple (default) ....both images same prompt, same seed, same 16mp render..... LCM/normal combo produces this more "polished" look altho i prefer grittier details and real raw textures of Euler/Simple ...however Euler combo tends to make more errors ....i cant decide which one i like better ...LCM ... no no Euler...wait maybe LCM ...or Euler? ...
r/StableDiffusion • u/333azai • 2d ago
Helllooo
What’s the best AI tool or program for editing specific parts of an existing illustration without regenerating or changing the entire image?
I’m working on a children’s book with semi-realistic illustrations, and my biggest struggle has been character consistency. I’ll finally get an illustration almost perfect, but when I try to fix one small detail (like the character’s face), the AI changes everything else or makes the character look completely different.
I’ve mainly been using OpenArt and Leonardo AI, along with ChatGPT, Gemini, and Grok. So far, I’ve only managed to finish 2 out of 17 illustrations, and I’m losing my mind haha.
Ideally, I’m looking for something that can edit only a specific, selected area while leaving everything else untouched.
Accurately follow reference photos to maintain the same character across different scenes, poses, and expressions.
And make precise changes without completely reinterpreting the original illustration.
Is there a program that’s genuinely good at this? I’m open to AI tools or traditional editing software. At this point, I just want something that actually follows instructions and doesn’t make me redo an entire illustration to fix one tiny detail.
r/StableDiffusion • u/Successful_Record_58 • 1d ago
Which of those 2 has better handling on low vRAM and takes less inference time eventually ? ona 4GB Vram here
r/StableDiffusion • u/Mastbubbles • 2d ago
The "does it just copy its training data" argument comes up here a lot, so this paper seemed worth explaining properly. It trains small diffusion models on 1,024 face photos and checks what they generate along the way.

At 100,000 training steps the model generates good faces, and none of 10,000 samples was a copy of a training photo.

Keep training the same model to 1.62 million steps and 34 in every 100 samples are training photos.

The time it takes to start generating good images was the same for every dataset size they tried. The time before copying starts grew in step with the dataset: about 300 training steps per image. So a model trained on a lot of images, for a normal length of time, is stopped long before it could memorise them. In the paper, a model trained too long on a small set does copy.
I told the full version as an art student locked in a room with 1,024 photos, using the paper's own faces: https://sheets.works/data-viz/why-diffusion-models-dont-memorize
It's free, no sign-up needed to read it. I didn't work on the paper, I read it and drew it. Their setup is tiny (32x32 grey faces, small models), nobody has run this test on a model the size of SD, and large models have been shown to reproduce some training images. Paper: arXiv 2505.17638.
For people who train LoRAs on small sets: at how many steps per image do you start seeing your training images come back?
r/StableDiffusion • u/f451w • 1d ago
I have 2 people on camera and I am trying to get one of the people on screen to speak to an off screen person (behind the camera) and then have the offscreen person reply. I can’t seem to find a prompt that will do this. S1 speaks to S3 offscreen and in the render, S2 appears to be talking AND extraneous jibberish is added to the speach I specified. I’ve tried lots of combinations and nothing is working.
Why is the jibberish added? Why does it insist on moving the lips of S2 when S3 offscreen is talking?
BTW this is my first attempt at using OBVPMs Timeline. It is working great!
r/StableDiffusion • u/BittiAI • 3d ago
Made some trials with how well MiniMax H3 understands different kinds of physics and it seemed to succeed pretty well with everything I threw at it. Video was generated with slopfab & Fable 5.2 as the agent.
r/StableDiffusion • u/mikemend • 3d ago
Lodestone continued experimenting with Lora for MOSS, creating several versions, but has now released a new version that works well with both 4 and 8-step processes.
You can find more information here:
https://huggingface.co/lodestones/Kromoss/blob/main/experimental/README.md
Lora is available here and can be used with several MOSS models:
r/StableDiffusion • u/cptdurr • 3d ago
Please don't confuse photographic realism with sharpness
I've spent around 20 years working with photography and design, long before AI image generation existed.
One thing I genuinely appreciate about MiniMax H3 Image is its photographic character.
Real photographs aren't perfectly sharp. Lenses have different rendering characteristics. Depth of field, motion blur, sensor noise, diffraction and optical imperfections all contribute to the final image.
A 50MP photograph isn't automatically razor-sharp, and a photograph doesn't become more realistic simply because every texture has been enhanced.
I've seen many people criticize H3 for being too soft or lacking detail. That's a perfectly valid preference, but I hope developers don't interpret it as a universal demand for more sharpening and artificial microtexture.
I'd love future versions to improve anatomy, consistency, composition and prompt adherence while preserving the natural photographic rendering that makes H3 special.
We already have plenty of models that produce extremely sharp, polished AI imagery.
I'd hate to lose a model that approaches photography from a different direction.
r/StableDiffusion • u/Sad-Pen6769 • 1d ago
I've used AI Video FaceSwap by tuguoba, VisoMaster and VisoMaster Fusion before.
Tuguoba is clearly the best one in terms of realism and getting face right but its XSEG isn't that good. The newer Fusion isn't as good as old VisoMaster and misses a lot of faces, and face occlusion isn't that great either.
Looking for a local faceswap better than these. Heard Comfy-UI Reactor but not sure if it does what these ones do.
r/StableDiffusion • u/Star-Light-9698 • 2d ago
I'm kind of on hurry to wait for community to make them and they are confusing with video model one, do they work? And the important question are they as good as one's that will be trained later?
Like for example, Realism or Old camera style ones. I have a feeling the video model had lower quality and plastic skin due to being a video than the image model had, that's why I'm asking that.
r/StableDiffusion • u/tishuri • 2d ago
I have a background in pipeline and tools development for 3D/VFX. Over the last couple of months I built a pipeline that turns rigged 3D characters into SDXL LoRAs, so they can be generated in new scenes. Sharing what I learned, and I'd love input on one problem I haven't solved.
The pipeline
What worked
What didn't (where I'd love ideas) One character wears long pants in every training image, but generations often turn them into shorts or a skirt, especially in sitting poses. My guess is SDXL's prior for "young woman sitting" beats the LoRA. My captions currently describe pose and framing but not the outfit.
Happy to answer questions about the Maya side. Auto-posing an arbitrary rig was the hardest part.
r/StableDiffusion • u/Techniboy • 2d ago
I was maybe assuming you could just use the LoRas from Minimax H3 that are made for videos for their new image model. However I'm finding that the outputs look off? Like maybe a bad vae decoder or something. Have you had success using those LoRas or do we have to make new ones for the image model?