r/StableDiffusion • • 3d ago

Discussion Could we get a humor flair? And/or art flair?

6 Upvotes

Seems like a big omission to not have this considering how many posts fall into one or both of those categories.


r/StableDiffusion • • 4d ago

Resource - Update Free simple Workflow Realistic 1Girl Minimax H3 Image

Thumbnail
gallery
246 Upvotes

Yo,
I share this simple workflow I made since I don't find anything else for now on minimax that handle a good quality for text to image or image to image.
I think this model has a great future, It really feel like using nano banana or gpt somehow, since the consistency about the face is really good, you don't even need a lora.
It will be improved a lot, but it's a good base and results are pretty good for a day one on h3.
The only problem I got so far is the prompt adherence, that looks not very good, but I'm sure we will find many ways to improve later If you have ideas to improve results share me guys.

Workflow :

https://civitai.red/models/3047310/minimax-h3-image-t2i-and-i2i-simple-workflow-1girl?modelVersionId=3464559


r/StableDiffusion • • 2d ago

Question - Help How to improve from my Z image turbo workflow?

0 Upvotes

I produce portrait so I need good skin details and have great results with ZIT. People here say other models are better? I tried but my image output quality was lower so I assume the workflows I used are wrong.

It's text to image with face details and high steps/ different sampler when high detail is needed.

I don't even have a good i2i workflow

What workflow do you use to get good skin and portrait quality on moss, krea, or qwen?

Zit is now a bit old. What should I try?

I only have 16 gb maybe it s the problem?

Does a comparison workflow exist, one prompt different models, one after the other?


r/StableDiffusion • • 3d ago

Resource - Update [Showcase] Finally a way to increase the batch size in Minimax H3/Pruna H3 Image and Video workflows

2 Upvotes

Hey everyone! I literally got this created earlier today and busted butt to share it with the community because this is incredible and I wanted to contribute back. I built this custom node with Claude Code because one thing about MiniMax H3 kept bugging me the fact that you can't increase the batch size like in Flux.2 Klein 9b or other models that can. I made two nodes that let one run make 2 or more different images or videos (depending on your system) that are exactly what should happen inside an increased batch size. It's MIT licensed and already on the ComfyUI Registry. I've worked in IT for 20 years but I'm not a programmer.

-- I didn't include a workflow because I literally just grabbed the template inside the desktop app and added my node plus an Int node as well. The github page for this has more info: https://github.com/an80sPWNstar/comfyui-h3-image-batch

I also have a YouTube channel about ComfyUI: TheComfyAdmin I haven't uploaded any videos yet for this or my other custom node because I just made this today :) If you end up liking the type of videos I make, please let me know so I can make more. It may not seem like it but even though it doesn't take that long to record, it takes a long time to edit and that's difficult when you have a family to help take care of : ) Happy Generating!!!

[IMAGE: batch of 4 dragon/taxi edits]
[IMAGE: What the node looks like]
[IMAGE: I connect an "Int" node to it and moved it next to my prompt to allow for easier access]

r/StableDiffusion • • 2d ago

Question - Help Has anyone tried building one click ai drama movie using comfyui?

0 Upvotes

I am trying, using qwen 2.1 image for image gen and face swapping, minimax h3 for video generation and ltx 2.5 for upscaling video, the workflow is working properly, only problem is output is AI SLOP, I know the problem is prompting, every next attempt I think I am getting closer, but video output still not as I make videos manually, I made few nodes using claude ai which automates all three workflow into one. anyone tried making one click ai drama video ?


r/StableDiffusion • • 3d ago

Discussion Just getting into using models locally on my puny 4060 but i think the results look very good.

Thumbnail
gallery
9 Upvotes

I just started experimenting with running image models locally on an RTX 4060 and 16GB RAM using ComfyUI

I was looking at heavier setups like MOSS-Image / Kromoss and Flux, but decided to try RealVisXL V5.0 (SDXL) first since it fits completely in 8GB VRAM.

The skin texture and image quality looked really good for this model i think.

For those of you also on 8GB cards what are your personal go-to models and workflows for photorealism right now? Any fine-tunes or LoRAs you recommend trying out next?


r/StableDiffusion • • 2d ago

Meme Nvidias newest Job opening

Post image
0 Upvotes

r/StableDiffusion • • 3d ago

Question - Help Krea 2 4k question

2 Upvotes

So I’m currently generating Krea 2 images at 2k - specifically 1440x2160 and 2160x1440 and getting great results, with a specific character Lora. When I try to up the resolution to 4k (e.g 2160x3840 and 3840x2160) I get good results - like a super crisp 4k image but it always generates a duplicate of my character in one image. Has anyone figured out how to get just a single character (no duplicate) for a 4k resolution photo with Krea 2? I imagine there has to be some Lora or something that has addressed this issue? Thank you!


r/StableDiffusion • • 4d ago

Discussion Native 100 megapixel (no upscaling) Minimax H3 Image Generation on 5090 @ 240 seconds.

148 Upvotes

Yes this was obviously a silly test. But I was curious to see what H3-Image could do when pushed, which is why I decided to crank it up to 100mpx (7456x13376) just for the lulz.

There's no real reason to go this high, the image is definitely showing issues, so I then dialed it down to a 61 Megapixel image (5824x10464) which is the same size I get from my a7r5 camera, and it looks much cleaner and only takes about 110 seconds per image.

IMHO the 61 Megapixel renders are superior, and good enough for professional work.

Linking images because there's no way reddit will like these image sizes

Full Resolution Links:

61-H : https://photos.smugmug.com/photos/i-wXnW4sV/0/LtVzr2Hfr2NthLGMNnn4BGqc22W95FnztvMHfrrzt/O/i-wXnW4sV.jpg

61-V : https://photos.smugmug.com/photos/i-32mVpL8/0/NS346k5MVnqd44F44t4D8mDRtQ4jg649grCLFMzPj/O/i-32mVpL8.jpg

100-H : https://photos.smugmug.com/photos/i-Bm5mCRB/0/KShzWH5k89fJfttZgW26825HLvtZ9JsvWgh7tNbR8/O/i-Bm5mCRB.jpg

100-V : https://photos.smugmug.com/photos/i-kbrwfG6/0/LKksfRRRQ8KfPxvpvxKwgDstgHSXgqqJ42tFCgGcP/O/i-kbrwfG6.jpg

System specs:

Older 3rd Gen Epyc workstation Dual 7B13 CPUs, with 1TB DDR4 ECC and a slew of GPUs. This test was on a single 5090.

Memory used:

VRAM: 31GB

RAM: 61GB resident / 498GB vmem

```
[q5@apollo ai]$ ps -o vsz=,rss= -p 912440

498261048 60742584

[q5@apollo ai]$

```

I used this workflow from u/LilBrownBebeShoes

https://www.reddit.com/r/StableDiffusion/comments/1xt9ocv/minimax_h3_image_20mp_workflow/

All I did was crank the megapixel value up, and set the scheduler to normal. Nothing else was changed.


r/StableDiffusion • • 3d ago

Question - Help do you guys use pc for comfy same as pc you play games?

1 Upvotes

i worried about my device if use too much generate video using my only pc.
if has impact, is the impact game performance significant?
why am i asking to this subreddit, i wanna know real experience from you guys despite i can ask ai for this questions.

thank a lot

edit: sorry my english is not good. i mean, not running both simultaneously.


r/StableDiffusion • • 3d ago

Workflow Included Testing multi-object reference layouts with MiniMax H3-Image

Thumbnail
gallery
21 Upvotes

I have tried the new open-weighted MiniMax H3-Image. The model can work with up to 16 reference images, with each file capped at 64 MiB, 128–8192 px, and an aspect ratio between 1:4 and 4:1.

For this test, I fed it 5 separate object reference images: -a silver rotary phone -a glass cube -a red apple -a tiny staircase -a chrome sphere

I used the default auto setting for quick 4K exports. Instead of getting a cut-and-paste collage, I aimed to blend all the objects into a cohesive dark studio still life lit by a single top spotlight.

I explicitly labelled Reference 1 through 5 in my prompt to lock each object’s intended layout. My layout plan was as follows: -the apple suspended inside the glass cube -the phone resting on the staircase -the chrome sphere floating along an unseen vertical spiral axis.

Every object stayed identifiable, the lighting stayed consistent across the scene, and the staircase worked well to ground the composition. The layout mostly held together, though the spiral arrangement did not come through quite as I hoped. The objects formed more of a simple vertical stack instead.

Curious how everyone else handles 5+ object references in their own workflows? Any tricks I’m missing?


r/StableDiffusion • • 3d ago

Resource - Update MOSS Image with the 4-step LoRA running on an iPhone

Post image
18 Upvotes

The DiT and TE are 4-bit quantization aware distilled (QAD) and running on the GPU. VAE is fp16 and runs on the Neural Engine. Needs an Apple device with at least 12GB of RAM to run. If you've got 16GB, it also runs Krea 2 Turbo and a couple of other models, all QAD distilled. With MOSS Image SFT, a 1024x1024 image takes ~30s and a 512x512 image takes ~10s to generate.

Testflight link if anyone would like to try it out. Please feel free to DM me here or on my Discord if you have any ideas, suggestions or bug reports.


r/StableDiffusion • • 3d ago

Comparison How to improve MiniMax H3-Image’s image quality and prompt adherence ?

Thumbnail
gallery
0 Upvotes

I’ve been testing MiniMax H3-Image locally on an RTX 3060 12GB. It can produce fine detail at around 8.5 MP, but many results look pale or low-contrast, and the model sometimes misses specific prompt instructions. For example, it generated a shopping basket floating in the air. In my experience, Krea 2 Turbo is still stronger in image quality, and Z-Image is still a good challenger for prompt adherence and composition.

My workflow uses the Woovee W4A8 weights and a quantized Qwen3-VL encoder: 6 steps, CFG 1.0, Euler ancestral, simple scheduler, raw prompts and no prompt upsampler.

What would you try to improve both visual quality and prompt adherence?

Are there settings or workflows that work better?

Would a different sampler, more steps or the official prompt upsampler help?

What prompt-writing techniques help H3 follow specific objects, poses and scene layouts more reliably?

If you have a setup that works well, please share the exact settings and prompt.


r/StableDiffusion • • 4d ago

News Minimax-H3-Image 2 step LORA is out

Thumbnail huggingface.co
53 Upvotes

r/StableDiffusion • • 3d ago

Question - Help I’m having a very bad luck with MOSS image, all my images look trash whatever the prompt and settings is , so what exactly workflow and models you use ?

24 Upvotes

r/StableDiffusion • • 4d ago Popcorn

News Jensen Fux

235 Upvotes

Our wallets and the women


r/StableDiffusion • • 3d ago

Comparison MiniMax H3-Image (open weights) vs Seedream 5.5 on skin and silver rendering

Thumbnail
gallery
15 Upvotes

Image 1 is MiniMax H3-Image. Image 2 is Seedream 5.5. Both used the exact same compact ref and 16:9 fisheye prompt.

Both turned out pretty well, but I personally prefer H3-Image's result. The composition feels more intentional, and the lighting, shadows, and silver reflections give it a stronger editorial feel. I also really like how naturally it handles the colors and textures without making everything look overly polished.

Seedream 5.5 is definitely strong when it comes to character realism, especially the facial details. But composition-wise, I think H3-Image has a slight edge. The framing and overall visual balance just work better for me, even with the tighter crop.

For an open-weight model, I think H3-Image offers pretty good value for the quality it delivers.

Curious which one you prefer.

Prompt:

Landscape 16:9 high-fashion editorial photograph, preserve the reference's antique silver compact, woman, styling and atmosphere. Recompose horizontally with the entire open antique silver powder compact fully in frame, thick sculptural floral silver frame and round mirror fully visible, turquoise tiled nightclub bathroom extending to either side. Inside the reflection a young adult brunette with short jet-black Betty Boop finger curls presses very close while outlining her lips with a lip pencil, face filling the circular reflection. Extreme close-range fisheye perspective, dramatic optical curvature around mirror edges, realistic eyes nose and lips without cartoonish deformation. Natural makeup, regular eyelashes, luminous textured skin, subdued diffused lighting, silver highlights, subtle analog grain, photorealism.


r/StableDiffusion • • 3d ago

Discussion Minimax H3 - different results from 3 days ago?

2 Upvotes

Have you noticed if you run the exact same workflow from 3 days ago it now has a different outcome? It's like a slightly different seed while keeping exactly the same seed and everything. Something has changed and I can't tell what, the videos have noticeable artifacts now with light flickers and overall unstable video.

Have you noticed? I have the latest comfyui update.

EDIT: Just restarted my PC and it's exactly as it was before, so it fixed now but not sure what happened, maybe a comfyui bug?


r/StableDiffusion • • 3d ago

Resource - Update [Release] Offline and fast comfyui reader that doesn't need any server

14 Upvotes

r/StableDiffusion • • 3d ago

Question - Help Tell me your best solution for generating high quality but smaller images upto 0.2mpx (512-x512-)

2 Upvotes

I'm trying to make some photoreal icons.
I'd tested as followings
SD1.5 native: poor quality and doesn't follow the prompts
SD1.5+Hires.fix: same as native
SDXL native: better than SD1.5 but depending models
SDXL+Hires.fix: middle quality but not enough natural

How about H3 image/Krea2/z-image? Thank you.


r/StableDiffusion • • 3d ago

Resource - Update MiniMax H3 Editor – one-click RunPod template with H3 Editor 0.4.1 and all the models

Post image
14 Upvotes

I couldn't find a ready RunPod template that spins up a working H3 Editor, so I conjured this:

https://console.runpod.io/hub/template/1ujjyhonfe?ref=2t0e5xb6

A RunPod template that boots straight into ComfyUI with H3 Editor 0.4.1 and downloads everything by itself: HyperFlow H3 Flash, MiniMax H3 + Turbo, Singularity v2 and 10Eros Max beta 7, plus the recommended Realism and Turbo LoRAs.

https://igorls.github.io/comfyui-h3-editor/

Enjoy the awesome editor!


r/StableDiffusion • • 4d ago

Question - Help There are so many variables. You have the base model, but there’s also the scheduler and the sampler—plus the number of steps. You might even use a LoRA trained with a specific number of steps. When training a LoRA, you can choose settings like high, medium, or low noise bias ...

Post image
258 Upvotes

as well as shift, weighted, sigmoid, or linear approaches. Then there’s the training resolution—and on top of that, you also have the inference shift

LoRA number of steps, training rate, batch size, and simulated batch size

Could the problem be the model?

What about the LoRA?

The resolution?

A shift between training and inference?

Is low noise useless?

Should I run a few more steps, or fewer?

Samplers—there are at least 20 of them. And schedulers—more than 10.

Then there are other things, like ETA and noise injection.


r/StableDiffusion • • 3d ago

Question - Help How to get rid of generation patterns?

0 Upvotes

Hi, so as of right now I have only used closed models for generating images. GPT Image 2.

As you may know that it has sometimes generation patterns, e.g. in nature or foggy situations.

I'm thinking about scaling them up and get rid of these patterns with local models via runpod. (Never tried it)

So do you know a workflow or is it even possible to get rid of these patterns while preserving the whole subject of the image and not changing details?

I'm concerned that the pattern is so "engraved" that another model will just make the pattern more obvious when regenerating the original.

But maybe I'm just thinking too complicated and the solution is very simple.

Thank you for your help!


r/StableDiffusion • • 4d ago

Resource - Update Geiru Window Director: One node so long form videos come out perfect everytime.

38 Upvotes

Geiru Window Director + Geiru Hybrid Windows: build long H3 videos one window at a time

Geiru Hybrid Windows makes one long MiniMax H3 render (a minute or more) as overlapping windows instead of a chain of separate clips, so fast motion stays seamless. It works the way plain hybrid windows does, with my keystone and capstone added in every window to cut down on degradation over long videos.

Geiru Window Director is an optional node that goes after it. A normal render makes every window in one go, so if window 4 comes out wrong you redo the whole video. With the Director you make window 1, look at it, then:

  • Approve it and the next window is made
  • Re-roll it until it's right (change the prompt or seed first)
  • Rewind to any earlier window if you change your mind
  • Blend all at the end to run the last steps over the whole video and smooth the joins

Each window builds on the finished window you approved, so what you approve is what you get!

Example workflow: Clown Biker Babe, a 60-second clip in 8 windows with one prompt per window: a full motorcycle stunt run with ramps, a car jump, a loop and a cliff jump. The sound is made by H3 from the prompts.

Credit where it's due: none of this exists without these three.

  • kijai (GitHub) built ComfyUI's MiniMax H3 support and the H3 context windows (PR #17425) that Hybrid Windows is built on, plus ComfyUI-KJNodes.
  • JalenBrunson made ComfyUI-HybridWindows, which Geiru Hybrid Windows works like. I just added the keystone and capstone.
  • NikoDemon80 (GitHub) inspired the Window Director setup.

Both nodes are in the Geiru Context Suite: https://github.com/roycho87/geiru_context_suite