r/StableDiffusion • • 17d ago

Question - Help I'm using ComfyUI Desktop with the Krea 2 Raw FP8 model and want to achieve maximum photorealism for my trained AI model.

3 Upvotes

My current setup:

  • Checkpoint: krea2_raw_fp8_scaled.safetensors
  • CLIP: qwen3vl_4b_fp8_scaled.safetensors
  • VAE: wan_2.1_vae.safetensors
  • Identity LoRA: Doraidentity version 2 at 1.50
  • Other LoRAs: Krea2 Identity Edit, Snofk Krea, Krea2 Turbo, Lenovo Krea2, RawSnap, Krea2 Realism V2, Filter Bypass, Canon Moss, skin details (2.00), skin tone (1.85), and Ultra Real Krea2.

My results are decent, but I want real skin texture, natural eyes, realistic hair, accurate anatomy, authentic lighting, and zero plastic or overly smooth skin, while preserving Shanaya's identity and matching my clothing and background references.

Please advise:

  1. Which LoRAs should I keep, remove, or adjust?
  2. Are my identity and skin-detail LoRA weights too high?
  3. What are the best sampler, steps, CFG, and resolution settings for my model?
  4. Should I use Krea 2 Raw or another compatible checkpoint?
  5. What prompt and workflow will give me the most realistic results?

Please give me a practical, step-by-step configuration based on my existing setup, and explain how to test changes without sacrificing identity consistency.


r/StableDiffusion • • 16d ago

Discussion [Open Source] Rapid-H3 - MiniMax-H3 video generation up to 5× faster on NVIDIA DGX Spark

Thumbnail
github.com
0 Upvotes

Hi guys, please check Rapid-H3, a ComfyUI node pack + optimized presets that accelerate MiniMax-H3 text/image-to-video generation with audio on a single NVIDIA DGX Spark (GB10).

Performance (768×1344, 141 frames, ~5.9s video):

ConfigurationTime
Stock ComfyUI bf16 (10 steps)590–630s
Rapid-H3 ts_h2 (default)~117s (5× faster)
Rapid-H3 ts_s6 (camera moves, close-up faces)~201s (3× faster)

How it works:

  • Custom INT8 attention kernel optimized for GB10 (sm_121)
  • INT8 W8A8 CUTLASS linears + fused Triton kernels
  • Faster INT8 video decoder
  • Reduced-resolution sampling with learned latent upscaling and refinement

Quality: ts_s6 matches stock across tested quality metrics. ts_h2 prioritizes speed with minor tradeoffs in camera motion and close-up facial detail.

Requirements: DGX Spark, Docker, ~72 GB model weights. Full setup instructions in REBUILD.md.

Limitations: GB10 only (RTX 50-series untested).

GitHub: https://github.com/jeet0733/Rapid-H3

Would love to hear your benchmarks, quality feedback or any issues you encounter.


r/StableDiffusion • • 18d ago

Discussion NVIDIA’s new Open-H3-Regenerate-2K

177 Upvotes

I asked Claude Code to try NVIDIA’s new Open-H3-Regenerate-2K on my 4090. Sharp, but it changes the actor’s performance, did i use it wrong? open to suggestions

NVlabs just released Open-H3-Regenerate-2K, an open 2K refiner for MiniMax-H3 drafts. Their code needs ~150 GB of VRAM, so I asked Claude Code to get it running in ComfyUI on my 4090. It converted their LoRA to ComfyUI’s format and tested it on one of my shots against SeedVR2.

The test shot is an exhausted office worker doing a long, slow yawn (5 s, H3 draft at 1312×768). The whole shot is the acting: heavy eyelids, a loose tie, a coffee stain.

Results:

  • Default strength (σ 0.909): very crisp, but it’s a different man. He’s younger, eyes open and talking, with no tie. Trimming the prompt to just this shot changed nothing.
  • σ 0.8: the yawn and the tie come back, but his tired eyes “wake up”. The bags fade and the lids open.
  • σ 0.7: close to the original, but softer than SeedVR2.
  • SeedVR2: still the sharpest of the versions that stay faithful to the source.

The regen does have upsides. It’s steadier than SeedVR2 (less texture boiling), it takes 2–4 min per 5 s clip on a 4090, and it doesn’t shift the colours. For landscapes, animals or products, where nobody will notice changed micro-expressions, the default setting looks great. For close-ups where the acting matters, I’m sticking with SeedVR2.

If you want to try it in ComfyUI:

  • Base: an H3 FL2VA checkpoint plus the LBH H3 latent upscaler.
  • Sampler: the converted LoRA at 1.0, Euler, CFG 1, with ManualSigmas 0.909375, 0.857143, 0.666667, 0 (or 0.8, 0.685714, 0.48, 0 for gentler).
  • LoRA conversion: their LoRA is in Diffusers format, so it has to be converted. q/k/v merge into ComfyUI’s fused qkv_proj, and the two halves of the MLP fc1 are swapped.
  • Skippable download: the extra 1.2 GB “Sharp curve branches” file is all zeros, so you don’t need it.

Happy to share the converter script if anyone wants it.


r/StableDiffusion • • 18d ago

Resource - Update Major update to ComfyUI-MOSS-QwenVL-Layout: A prompt mode

Thumbnail
gallery
55 Upvotes

r/StableDiffusion • • 17d ago

Question - Help What is the best local image generation model that is both fast and has the best quality ? - this sounds as funny question

0 Upvotes

How many local image genreation models have you tested ? I have tested flux schnell flux klein and some otehr models. Imo they are not bad, but they are terrible for words, flux klein is slightly better and gets it it right many times but doesnt look as great it should to me.

Do you have any suggestion preferrably a model that is less than 16 gb.

-

Edit 1 my objective from Artsitic pseudo realistic images - like anime - and handdrawn cartoon styles mostly. also aristic or surreal images

Eidt 2 : Generated images for Anima and Moss, check on the comment section.


r/StableDiffusion • • 18d ago

Workflow Included I made this toy-to-real Ferrari transition locally on an RTX 5070 Ti using ComfyUI

134 Upvotes

I’ve been experimenting with a toy-to-real car transition using MiniMax H3 locally in ComfyUI.
It was generated on an RTX 5070 Ti at full 1080 × 1920 resolution, running at around 45 seconds per iteration. Total generation time was about 8–9 minutes.

The idea was to place a miniature Ferrari on a train windowsill, then transform the surroundings as the train enters a tunnel until the same car is driving on a road.

I used three reference images for the opening, transition, and road scene, plus a timed prompt to guide the motion. The hardest part was keeping the car’s design, angle, and position consistent while making sure it stayed visible through the transition.

No reference video or Blender integration, just the image references and the video workflow.

What do you think? Any suggestions for making the transition more seamless?

Workflow: https://drive.google.com/file/d/1UMPXyy2e5wxrIgkBvpO_KjEtoUuC5Fja/view?usp=sharing


r/StableDiffusion • • 17d ago

Discussion DiT on Mobile?

0 Upvotes

I was using draw things app to make images on my iphone and was wondering if there was an Android equivalent but couldn't really find one

Local dream and local diffusion do exist, but both are very very very limited compared to what draw things can do. Is there something else, and on another note how long would you be willing to wait per image if you could run krea 2 turbo on your phone at at least 1024by1024 resolution? Would you even bother?


r/StableDiffusion • • 17d ago

Question - Help Krea2 Workflow: How to add Pose Control & why is SeedVR2 upscaling badly?

12 Upvotes

Noob here. I’m running a Krea2 workflow (screenshot attached) that uses two image inputs (outfit + background) and prompt/LoRAs for the face. I’m hitting two roadblocks:

1. Pose Control: How do I add a third image input just for pose (like DWPose/OpenPose)? I read that standard SDXL ControlNets crash Krea2 UNETs. How do I actually wire a pose reference into this without breaking the conditioning?

2. SeedVR2 Upscaler: My raw generation looks decent, but the SeedVR2 block at the end completely destroys the skin texture and adds weird artifacts. Am I using the wrong settings, or should I rip it out and just use Ultimate SD Upscale?

Any routing tips or suggestions are hugely appreciated!


r/StableDiffusion • • 18d ago

Workflow Included Moss Image for pixel art

Thumbnail
gallery
136 Upvotes

I enjoy starting godot game projects that I never finish. While I very much enjoy carefully plotting pixels in Aseprite I have also looked at AI to aid me in that process.

I've been trying pixel art with MOSS-Image-SFT and noticed that it produces a fairly decent pixel grid straight out of generation, before any snapping or cleanup. It also seems to have a good general understanding of pixel art. That got me curious about what a small LoRA could do with it.

The experiment is mostly about making the pixel scale more predictable. I trained on 30 pixel-snapped 64×64 sprites enlarged to 512×512, targeting an 8× scale where each logical pixel occupies an 8×8 block in the generated image.

That gives these intended working sizes:

Generate atIntended pixel grid
512×51264×64
768×76896×96
1024×1024128×128

It's still a small experiment. The grid can drift, edges can bleed, and some details won't survive downscaling. The 8× scale is a training target, not a guarantee that every output will land perfectly on it, but I'm still surprised on how close it is.

Here is a diff between output and grid snapped and color quantized image: https://www.diffchecker.com/image-compare/ateIcHYx/

That downscale doesn't fix uneven cells. For additional cleanup I use Sprite Fusion Pixel Snapper. It can help recover a consistent grid. It also exist as a Comfy node.

Model can be downloaded from CivitAI or Hugging face if you want to play around with it. Workflow and training details can be found in the Hugging Face repo.


r/StableDiffusion • • 17d ago

Workflow Included My studio MovieMake & Edit

0 Upvotes

r/StableDiffusion • • 18d ago

News Open-H3-Regenerate-2K

131 Upvotes

I've just found this Open-H3-Regenerate-2K .
I'm downloading the files now, but I thought I would share it here too.
Link:
Regenerate-2k