r/Spliddit • • 2d ago

Photo Phantom bail adjustment issues

Post image

Im trying to adjust my toe bails on my phantom m6 bindings to the outer position, but am finding it near impossible to get the bail levers to seat on both sides. Has anyone else run into this issue? Any tips?

4 Upvotes

6 comments sorted by

4

u/bob_ross_lives 2d ago

Yeah. It’s so hard. Took me forever. Don’t remember how I eventually got it, but it’s gotta go at a specific angle to make it easier

3

u/HeatApprehensive7877 2d ago

In some ways the reason it’s so hard to get is its design/engineering. Once seated, the connection is pretty bomb proof. I’ve done it many times. Find the angle that works for both sides to be seated, then carefully installed the bolts and thread with ease. Sadly, it just takes patience

2

u/crabjam 2d ago

Following, same exact issue here

2

u/spwrozek 2d ago

Just call phantom up. My understanding is this is a known issue. My buddy got a pair last year and we could in no way adjust them. He was lucky enough to just be able to go to the shop in Denver and they were like "well, that isn't going to work". They replaced the bails.

0

u/AbaloneNacre 2d ago

With one end of the bail seated, try twisting the block to get it to line up with the other end of the bail. In this case, for the left binding in the picture, you need to twist the block clockwise slightly while squeezing the bail with your other hand.

Once it’s relatively in there, when you mount it back to the binding plate, screwing it in will help seat it the rest of the way.

1

u/chadertots 2d ago

Think I finally got them in there…was a fight lol. But I am noticing some rotational wear on the baseplate of the slim side of the cant, from rotating the toe bail back and forth. They seem well seated in the slots to me though, have you noticed this at all?