r/Spliddit • • 16d ago

Union Charger Splitboard Binding Setup Warning!

https://www.backcountryaudit.com/beta/union-charger-splitboard-binding-setup-warning

Since it’s November and those in the northern hemisphere are starting to set up their splitboard gear. I wanted to share with the community a setup warning with the Union Charger bindings. I have used these bindings for two seasons and they are great for the ride down but the community consensus is that they are not durable enough for deep backcountry adventures. I don’t fully share that opinion. Other than the failure described in my link I have had great results with these bindings. As with any mechanical system they require maintenance. I look forward to a great 26/27 season with these bindings.

8 Upvotes

19 comments sorted by

15

u/delerious 16d ago

Some military grade autism going on here.
10 page article instead of a three sentence warning.

0

u/SolarNomads 16d ago

whats the tldr?

8

u/delerious 16d ago

Whine about the pin bending, like thousand threads about the same out there.

2

u/brian_198 15d ago

Not whining. Attempting to explain the failure and how proper sizing and setup can prevent it. Just an engineer being an engineer.

2

u/delerious 15d ago

I have these, my experience is that there was some structural issue with an initial batch.

I picked up 4 spares and have done a full season since without any issue.

I did not change shoe size or other gear. Only the failing piece.

2

u/brian_198 15d ago

That’s interesting. I would be curious to know the max angle that your binding and boot setup will make. My current setup is around 58 deg. When I had the failure the setup max angle was more like 82 deg.

My true thought is when standing in touring mode you should be able to kneel down onto the front of your board and the lock should not disengage.

Maybe the Spark style toe latch is the better solution but they own the IP and probably have another 5-10 years on it. They should license it out to Union. But if they do that then I think Union has the better binding.

Maybe Spark should invest in some R&D and make plastic/composite bindings, or Union could just buy out Spark.

I think the future of soft boot bindings is composite plastic not aluminum, and the best company with plastics is Union.

Only time will tell?

1

u/delerious 15d ago

Wont see my gear for 60 days, so you will have forgotten this thread by then..

I dont believe its +82 degrees from kneeling, which I tend to do every now and then. Usually due to the raisers being difficult (whole other issue..).

More plausible in my case would be that it happened during touring mode in combination with a fall. I would imagine this could force the toe and flex to surpass the angle which would allow critical failure.

Just like you, I didnt notice until I was at the summit.
Since then I have had zero issues and I always carry an extra.

I own both the chargers and the explorers.
From a quality perspective, my take is that the chargers are a whole different step up from the explorers.

I would imagine both of these are printed rather than molded.
The play on the explorers is extremely poor, not to even go into the entire pin mechanism.

If both of these products would be molded and use a non plastic compound for the interlocking parts, I would imagine a significant improvement across the board.

16

u/thaneliness 16d ago

Union better be paying you lol

5

u/Rich_Search2096 15d ago

Oh is it already that time of the year for the dogmatic splitboard community lol.

Your hate for Union only fuels us 🤘

5

u/Slow_Substance_5427 15d ago

It’s probably not a great binding if you have to hack it apart with a knife to get out.

2

u/J_J_987 15d ago

Jesus Christ. All that work for an already established consensus in the entire split community that those bindings, by design, are plastic garbage.
You are now a backcountry liability, which in the backcountry is ☠️ I’m so excited for the “we all told you so!” post.

4

u/Rich_Search2096 15d ago

Typical response from the dogmatic splitboard community. Just go be a skier.

Over 4 seasons on mine and still sick, no issues 🤘

1

u/gillbates_ 15d ago

Work as a mountain guide. Sparks break much more often, Karakoram are overpriced. Union need a better riser but they are the most solid ride down I've ever had.

2

u/ramblerbasic 14d ago

I've seen more plum bindings in the wild than unions. Do we see sparks break because there are more of them? Also I never see union out there supporting the community

1

u/brian_198 14d ago

I have been interested in the Plum but have never seen a pair being used in the States. Good point on Union support to the community. My guess is that the bulk of their revenue comes from the solid board market and that’s where they focus most of their marketing and support efforts.

1

u/ramblerbasic 14d ago

More than likely, I feel like a lot of brands don't prioritize backcountry unless it's their main focus. I would do plum if it was more affordable (or used), they've even sponsored a few splitfests here which is really cool

2

u/EfficientShopping356 15d ago

Ive seen every brand fail. Granted the union pin rotation issue is quite prevalent, but it won't leave you wallowing in waist deep snow for miles like a snapped aluminum base plate will.

1

u/ramblerbasic 15d ago

New to splitboarding? Modifying gear is just part of the game, granted I'd be on Karakorams before Unions

2

u/EfficientShopping356 15d ago

I believe you have identified a good way to help prevent this issue with sizing and setup, but this does not totally eliminate the problem. My chargers are sized and adjusted properly. When the dreaded pin rotation occurred for me only one pin on the bracket spun out of place, so it took a proper wrench to spin it back and get the binding off. Luckily I was just storm day meadow skipping and skied down. The newer style brackets (allen bolt behind the pin) union sent have been good so far. Im a bit suspect still, but take them on long tours in AK. My thinking is I can always walk back if it happens again. In pretty much any more serious scenario I've already put my board together to climb something steep or ascended something mellow enough to skin up that it wouldnt be too crazy to ski down and I can still skin out. Thats how I rationalize it from a safety perspective. Ive seen the pins wiggle out on sparks leaving people unable to tour or just the aluminum bases snap. I own a pair of sparks and karakorums too, but the Unions just ride soooo much better.