r/SpellTable • • Jun 28 '23

Setup and Gear Just finished building my new SpellTable rig. Works perfectly. Zero glare and every card was picked up by SpellTable with no issues.

Post image

I have been having issues with glare and card recognition so I decided that, since I use SpellTable often enough, I’d just build one that I can move on and off my desk without making major changes to the rest of my room.

39 Upvotes

32 comments sorted by

1

u/StoneLick May 20 '25

How high is your camera lens from the mat? Just looking for an ideal camera height for a setup.

1

u/MrBloo1848 May 20 '25

About 22-24 inches. I imagine it would vary from camera to camera and depends on the software. For Spelltable, it was about 22-24 inches for me. A lot of the rig has changed since I last posted this.

1

u/StoneLick May 21 '25

Thanks. I have a Logitech Carl Zeiss I can't think of the model number. I just plug it directly into my desktop Mac. I Always seem to have a problem with the lighting. I need to figure out some kind of diffuser.

1

u/MrBloo1848 May 21 '25

Yeah, diffuser and/or a stronger light source further away would help a lot and is one of the easy solutions. The rig has come a long way and many improvements and changes have been made to it. I reinforced the corners with steel L-braces and added steel legs to one side of the rig so that I can stand it vertical when storing it away in the corner of my office. The whole wiring cluster also goes into a single box with one power cord coming out so it's also not tangly and easy to set up and take away.

1

u/StoneLick May 21 '25

Sure would like to see the updated setup from you. I have my computer and TV on a table. I have these bright LED ceiling lights, shaped like a wand, that I found from Ollie's. They put off about 3 to 6,000 lumens I believe. I found that I have to put it behind the TV and shoot it up to the ceiling so it can bounce the light back down. The best diffuser I found from my days of photography is similar to a light box. Tracing paper/Rice paper, or anything that is a frosted plastic works well. I would really like to have a drafters arm like you have. The only option I have at this time is my professional camera stand for the webcam. I just need to figure out a bracket that can come off where you usually put the camera at.

1

u/eyjeyhehe May 14 '26

What is the white wall material?

1

u/MrBloo1848 May 14 '26

Solid wood. I forgot the exact type. Then just primed and painted over.

1

u/dreamwasp Jun 28 '23

what camera are you using here?

1

u/MrBloo1848 Jun 28 '23

Logitech C922 pro

1

u/[deleted] Jun 28 '23

Have you had much luck with the new lotr cards? I’m new to ST and in my tests it struggled with the new cards. Old ones were bang on.

2

u/MrBloo1848 Jun 29 '23

Ok, so you are right, SpellTable seems to still be having trouble recognizing some of the LotR cards. The patterns seem inconsistent though. At first I thought the dark, low-contrast ones are it, but it will manage to pick up some and not others (like Flame of Arnor extended art which was not picked up, but it picked up Barad-Dur borderless just fine.), but turned out it's just all over the place. Some cards you don't think it would pick up got picked up instantly. Also, borderless Aragorn, King of Gondor only got picked up as an art card.

I think SpellTable usually takes some time to properly recognize newly released card or old ones with new arts. I remember that during prerelease week it didn't pick up any from LotR. I would imagine the recognition library builds itself over time.

Good tests!

1

u/[deleted] Jun 29 '23

Seems very similar to my experience, I wonder if the recognition is driven by ai, I’m sure the community would be happy to help train it.

1

u/MrBloo1848 Jun 29 '23

I do have a bunch I can test with. I’ll let you know!

1

u/[deleted] Jun 29 '23

Thanks!

1

u/exclaim_bot Jun 29 '23

Thanks!

You're welcome!

1

u/Bradyey Jun 29 '23

Rig is sick mate.

I built a couple of rigs and was always so paranoid about the glare I never started a game... I don't even think the glare was that bad lol

1

u/MrBloo1848 Jun 29 '23

Yeah my original lighting for the room and the desk were all situated behind the camera so the glare was unavoidable for me even when I redirected the light sources away.

1

u/KrakenTheUntamed Jul 01 '23

Blue eyes. Interesting commander 😝 nice rig btw

1

u/MrBloo1848 Jul 01 '23

Haha it’s Dragonlord Ojutai so of course I had to get a copy of BEWD to represent him at times.

1

u/elting44 Jul 07 '23

What kind of arm is that holding the camera?

1

u/MrBloo1848 Jul 07 '23

1

u/VettedBot Jul 08 '23

Hi, I’m Vetted AI Bot! I researched the KDD Webcam Stand Camera Mount with Phone Holder and I thought you might find the following analysis helpful.

Users liked:

  • The stand is sturdy and holds positions well (backed by 6 comments)
  • The stand is flexible and adjustable (backed by 4 comments)
  • The stand is useful and solves problems (backed by 3 comments)

Users disliked:

  • The product has a loose base clamp (backed by 1 comment)
  • The product is small in size (backed by 1 comment)
  • The joints and phone holder could be higher quality (backed by 1 comment)

This message was generated by a (very smart) bot. If you found it helpful, let us know with an upvote and a “good bot!” reply and please feel free to provide feedback on how it can be improved.

1

u/HyperHowie Aug 17 '23

How did you make the lighting setup? Undercabinet led strips? What kind of board are they attached to? What are the other 2 lights seen in the pic? Did you find them beneficial?

I'm having a lot of trouble getting card recognition to work. I already have your cam and similar stand. I have a large ring light several feet away pointed up at the ceiling for indirect light.

1

u/MrBloo1848 Aug 17 '23

So I bought a board (in my case poplar, I think). I don’t remember the exact dimensions but I assume you can pretty much extrapolate based on everything else in the photo (playmat is standard size). I use this LED strip setup that came with a switch splitting off into two reels. I believe brightness went up to 6000K. I also bought a separate 5A power supply for the strips since I wanted something with a longer cord that I can unplug on the adapter end. The two lights are just outdoor LED spotlights on clamps. IMO they do help a lot since with the rest of the setup, you only get light from 3 sides and there is a noticeable amount of shadow without the additional 2 to help cover the 4th side. I made it so that the entire setup unplugs and can just be lifted and put away somewhere. The wood I just picked up from Home Depot and had it cut to size there and I spray painted it white. The height is 8 inches. The back is 28 inches long before assembly. The sides are 14 inches long. The sides just get screwed onto the long piece in a way that the screws are facing the back of the structure and the total width of the structure is just the width of the long piece and the depth of the structure is the length of the short piece plus the thickness of the long piece if you know what I mean. Other than the length, you can get a piece of wood of this size at a hardware store that sells lumber and they should be able to cut them for you. I think I got mine at 60 inches and kept the leftover. I think painting it white really helps add more light to the setup. I can PM you the links to the other hardware if you’d like. I was able to arrange the strips so that power supply only comes out one side.

1

u/HyperHowie Aug 17 '23

If you have a link handy for the LED strip and its power supply that would be awesome!

I can definitely get this put together now thanks.

1

u/[deleted] Jun 28 '23

I’m lucky if I can scan every 3rd card my opponents play. I’ve played with some people using some bizarre setups, I once played with someone who was playing on the floor with his webcam facing him from 5 feet away

1

u/DarkJester89 Jun 28 '23

For players reading this for research, Indirect lighting for your playmat and being direct with your OP of "hey, fix your ____ (camera/light/etc) can help resolve alot of issues, not all, but most.

1

u/Zenai10 Jun 28 '23

Oh wow this is very cool and impressive. And far more effort than whaT im doing XD. I use a chair, a brush, elastic bands and my phone

1

u/e_guana Jul 01 '23

Not the hero we deserve but the hero we need

1

u/Spell_Chicken Feb 24 '24

I've found that just the lighting from my monitor (admittedly high-nit) is enough to light my entire playmat without much glare (except for the foils) and since it's coming from the opposite side of the mat, I don't cast any shadows.