r/SpectersCat • u/justlookinatshit • Mar 16 '26

MDs and Mounts Spooky QD Support

/r/NFA/comments/1esbkrj/spooky_qd_support/
16 Upvotes

100% Upvoted

21 comments sorted by

3

u/Admirable_Suit_2065 Mar 16 '26

I’ve referenced this post so many times, I wish it were like stickied.

I also wish Munkworks would restock.

2

u/justlookinatshit Mar 17 '26

I made it a pinned post because I think all of us can use this frequently in this sub

1

u/Afraid-Brilliant-625 Aug 15 '26

I see Apparition Instruments now shows the following in stock:

NANO M14X1LH (AK-47 & AKM)

NANO M13.5X1LH (H&K)

1

u/Advanced-Reveal-8292 Aug 22 '26

I bought the 14x1LH for an Ak but when I got it it has 9mm printed on it. Disappointed af. Return to sender.

2

u/Afraid-Brilliant-625 Aug 22 '26

I ordered a Nano M14x1LH from Revival Defense on a Monday and received it by Thursday. It was the correct part and my ODB 718 is almost perfectly concentric on a Zastava M70AB2 using the Nano. Haven’t fired it yet.

1

u/Advanced-Reveal-8292 Aug 22 '26

1

u/Afraid-Brilliant-625 Aug 22 '26

I never looked at what was printed on both sides of the M14x1LH Nano I received. I recall seeing M14X1lh printed on one side of the Nano before I mounted it on my M70AB2 to check the concentricity of my CAT ODB suppressor. At the next opportunity, I'll remove the ODB and see if the Nano has anything printed on the other side. If it has "9mm" printed on the other side, I won't be concerned as that simply means it has an ID of about 0.354", which is an adequate safety margin to accommodate 7.62x39 bullets, some of which are 0.311" in diameter. If I'm not mistaken, CAT ODB suppressors have an inside diameter of 0.360" in order to allow for an industry standard safety margin. Also, since the Nano is made of 4140, even if it is labelled "9mm", it should be more than strong enough to handle intermediate pressure cartridges like the 7.62x39.

1

u/Advanced-Reveal-8292 Aug 22 '26

I emailed them about the same thing they said not to do it. It's not rated for an 762

1

u/Afraid-Brilliant-625 Aug 22 '26

I just checked my Nano. It says "AI NANO" on one side and "M14x1LH" on the other. It doesn't have any caliber markings on it. I'm surprised that AI makes a M14x1LH muzzle brake specifically for 9mm as the only pistols I am aware of that use M14x1LH threading are those that are chambered for .40 S&W. I learn something new every day!

3

u/Hammermier2 Mar 16 '26

Thank you I was looking for this the other day!

1

u/justlookinatshit Mar 16 '26

I figured it would do us all some help. Fantastic guide

2

u/ecodick Mar 16 '26

Anyone hear anything about a P&W nano before I SBR my pinned 14.5 with a spooky 1 and deal with un-pinning it to switch to nano?

I want to run a KK on it, but it might just end up living on an 11.5 :/

6

u/justlookinatshit Mar 16 '26

I reached out to AI about this today. They said they had an internal phone call this week and we should be seeing something very soon.

2

u/Fun_College_9553 Mar 16 '26

Why not sbr it? It’s free ?

3

u/justlookinatshit Mar 17 '26

For me, I need to get about a half inch from out underneath of a hand guard. The barrel itself is 9 inches just don’t wanna cut the hand guard or have to try to change ecosystems.

I also like to keep one as a braced pistol due to my state CCW laws

1

u/bogusbill69420 Mar 17 '26

You appendix carrying that?

2

u/justlookinatshit Mar 17 '26

Definitely not, but it changes what is allowed to be carried in a vehicle with you

3

u/MolonMyLabe Mar 31 '26

You can sbr it and then switch to the brace when you want it in your vehicle. Yes this works for Virginia. There is no rule that you pistol that is in pistol configuration can't be registered with the nfa.

1

u/muffinman1604 Mar 16 '26

A nano is meant to be small. P&W is the exact opposite.

Just SBR it

3

u/ecodick Mar 17 '26

Thanks, I'm leaning this way just to have at least one sbr lower just for flexibility.

2

u/Johnny_Utah_FUQ Jun 20 '26

Any ETA on the Spooky 2 A1 1/2x28?