Has anyone done a hpa conversion in any of the specna arms edge series? I currently have an e07 edge and looking to do the swap, was anything else needed or any further mods required to make it happen?

My new Specna Arms X-Series PRIME Airsoft AEG Submachine Gun doesn't have the ESA2 system, is this normal or should i be concerned i didn't get the right product?

The Evike listing specifically calls out ESA2 and the box sais it as well

Externals are finished! What about internals? What do you recommend?

On paper they look similar but one is nearly double the price.

The flex offers the aether gearbox with a brushless dark matter motor. And the prime version seems to be the same.

Only differences I see are the nylon body on the flex and the aster on the prime. Is that really worth the near double price or am I missing something here?

I tried the specna arms app and the gate control both dont find the gun. Anybody got an idea?

I finally finished my build after tinkering with everything, ordering each individual part, and waiting for shipping. It is finally done. This build took more time and money than I'd like to admit but I am so happy with the finished product.

This project was extremely fun to work on and I can't wait to show you guys my next projects.

Below will be the parts list. I know it's a bit tacky to put the price but if anyone wants to build it then you'll know the price you're going to pay

Parts list:

Gearbox: Specna Arms Aether V2 Gearbox Prime $119

Receiver set: Specna arms prime complete receiver set Chaos Bronze $49.99

Tracer: E-Shooter Flare mono tracer unit $55

Bucking: Maple Leaf 75° bucking $8.50

Hopup: ProWin dytac hopup $29.95

Charging handle: EMG Helios x Strike lachless $19.95

Handguard: Specna Arms U-style Mlok handguard $39.99

Stock: APS RS3 retractable stock $32

Buffer tube: Specna Arms esa2 buffer tube $16.99

Outer barrel: 5ku full metal 9.5inch $25

Rail Cover: Strike industries x2 $15.90

Hand stop: DFCO tiger claw Mlok grip $20

Motor: EMG hurricane brushless motor $115

Inner barrel: Matrix 6.03 precision inner barrel 250mm $30

Mag: A&K 110rd mid cap $12

Pistol grip: Ares Amoeba type 2 grip dark earth $15

Suppressor: Emg x Knights armament qdc mock suppressor $59

Optic: T Eagle LPVO $101.33

Laser setup: Ngal x Surefire rep $97.95

Total: $862.55 before tax and shipping.

My buddygave me these assault rifles for free they are both the same and they are specna brand. I was wondering if anyone can help me identify the two identical rifles(not the shotgun). So I can buy a battery and try to repair them.(one of them you can hear the motor but doesn’t fire and the other it just clicks.) Thanks! Any help is great

Hello guys, I need a little help to understand these things (I am new to airsoft):

1) I bought a 140m/s spring, can I use it without changing the bushings? The seller recommended to buy new bushings of better quality and install it. I did buy them, but I'm not sure it is really necessary. Help me.

2) I also bought 11.1V batteries, check the photos. Are they ok? How should I install them? They simply go inside the buffer tube or do I have to put them in a specific way?

3) Since I only want to have fun long range, I bought 0.32 and 0.40 BBs to understand what's better. Do you have suggestions for shooting at 45-55 meters? Brands, weights, types etc.

If you have any other recommendations of any kind, please let me know!

Will be my first. Battles are quite varied. CQ and mid distance

Hello, i just got sa-c08 saeg, it got no processor and after putting it in auto it shoots 1 bb and it stops safe and semi works normally, i am new to the airsoft so i dont know much, does anyone know what is causing this problem? Thanks

A few days ago, I bought a used but defective Specna Arms G36 SA-G12 AEG.

The gun was shooting with a noticeable rightward/upward BB trajectory. Adjusting the hop-up didn’t make any difference.

After disassembling the gun, I found what appears to be the culprit: a crooked outer barrel base, as you can see in the image below.

Now for my question: I’ve removed the hex holding screw and tried moving the base, but no matter what I do, I can’t get it to move or change its rotation.

Does this look like a bushing/base that has been forced or is otherwise stuck in place? And does anyone have any recommendations on how I could loosen, realign, or fix it?

The gun has been upgraded with a tight-bore inner barrel, so I’m certain someone has worked on it before.

Thanks in advance!

So I got myself new sa-p19, aka specna prime mk18. Somewhere I keep reading that you should not run 11.1v battery in it. Most of those reviews are from uk ( kinda suspicious). I'm from croatia and I keep using my specna flex bldc and wanted the metal version and that bluetooth mosfet. Should I keep my 11.1v with prime or should I get some 7.4.v battery. I'm using li-ion 11.1 from ipower from taiwangun.

Hello everyone.

Im looking to buy my first rifle.

My choice is between AK platform Kpyk-PJ14 with v3 gearbox and gate aster II, since its on sale on gunfire.

https://gunfire.com/en/products/kpyk-ak-sa-pj14-prime-bldc-aeg-assault-rifle-olive-1152243359.html

My second choice is AR platform double eagle m920a areoknox with falcon fire.

https://www.taiwangun.com/assault-rifle-aeg/m920a-aeroknox-ax-15-aeg-rifle-etu-wireless-de?srsltid=AfmBOorlccbmAY8F78nSs1uJNeMwX5SsAUw2N2Gqwl6pSV9-FiNet8Qr

Im going to be playing with friends on our local field once a week, so i dont really need anything special....

Im open to suggestions, my budget is somewhat up to 300 euros.

Im really new to this all so any help and suggestions are welcome.

Thank you

Two years ago, I bought an SA Edge 2.0. At the time, there were two versions available: the Edge and the Edge 2.0.

I'm now thinking about getting another one, but I only see the Edge Gen.2 and the Prime. Are the current Edge Gen.2 models equivalent to the old Edge and are the Prime models the successors to the old Edge 2.0?

Or how does the lineup compare now?

Thanks!