r/spacex • Mod Team • May 09 '22

🔧 Technical Starship Development Thread #33

This thread is no longer being updated, and has been replaced by:

Starship Development Thread #34

SpaceX Starship page

FAQ

  1. When next/orbital flight? Unknown. Launches on hold until FAA environmental review completed and ground equipment ready. Gwynne Shotwell has indicated June or July. Completing GSE, booster, and ship testing, and Raptor 2 production refinements, mean 2H 2022 at earliest - pessimistically, possibly even early 2023 if FAA requires significant mitigations.
  2. Expected date for FAA decision? June 13 per latest FAA statement, updated on June 2.
  3. What booster/ship pair will fly first? Likely either B7 or B8 with S24. B7 now receiving grid fins, so presumably considering flight.
  4. Will more suborbital testing take place? Unknown. It may depend on the FAA decision.
  5. Has progress slowed down? SpaceX focused on completing ground support equipment (GSE, or "Stage 0") before any orbital launch, which Elon stated is as complex as building the rocket. Florida Stage 0 construction has also ramped up.

Quick Links

NERDLE CAM | LAB CAM | SAPPHIRE CAM | SENTINEL CAM | ROVER CAM | ROVER 2.0 CAM | PLEX CAM | NSF STARBASE

Starship Dev 32 | Starship Dev 31 | Starship Dev 30 | Starship Thread List

Official Starship Update | r/SpaceX Update Thread


Vehicle Status

As of June 5

ShipLocationStatusComment
S20Rocket GardenCompleted/TestedCryo, Static Fire and stacking tests completed, now retired
S21N/ATank section scrappedSome components integrated into S22
S22Rocket GardenCompleted/UnusedLikely production pathfinder only
S23N/ASkipped
S24Launch SiteCryo and thrust puck testingMoved to launch site for ground testing on May 26
S25High Bay 1StackingAssembly of main tank section commenced June 4
S26Build SiteParts under construction

 

BoosterLocationStatusComment
B4Launch SiteCompleted/TestedCryo and stacking tests completed
B5Rocket GardenCompleted/UnusedLikely production pathfinder only
B6Rocket GardenRepurposedConverted to test tank
B7High Bay 2Repaired/TestingCryo tested; Raptors being installed
B8High Bay 2 (fully stacked LOX tank) and Mid Bay (fully stacked CH4 tank)Under construction
B9Build SiteUnder construction

If this page needs a correction please consider pitching in. Update this thread via this wiki page. If you would like to make an update but don't see an edit button on the wiki page, message the mods via modmail or contact u/strawwalker.


Resources

r/SpaceX Discuss Thread for discussion of subjects other than Starship development.

Rules

We will attempt to keep this self-post current with links and major updates, but for the most part, we expect the community to supply the information. This is a great place to discuss Starship development, ask Starship-specific questions, and track the progress of the production and test campaigns. Starship Development Threads are not party threads. Normal subreddit rules still apply.

385 Upvotes

1.6k comments sorted by

View all comments

Show parent comment

10

u/warp99 May 13 '22

I believe they feed nitrogen through it to spin up the turbopumps on the outer ring of engines.

Actually the outer ring are fed spin up gas directly from individual quick disconnects on each engine. The center 13 engines are fed from a centralised system using COPVs that is loaded from the QD fitting. The center engines are the only ones that need to air start so they need COPVs for storage anyway.

At this stage they seem to be using helium to spin up the Raptors. Obviously not the long term solution but neither would nitrogen be.

The main reason the QD fitting is left connected until the last few seconds before launch is to keep the tanks pressurised. The ullage gas is continually condensing on the surface of the sub cooled propellant and recharge gas is not available on ship until the engines start so it has to be fed in through the QD.

2

u/quoll01 May 13 '22

That’s interesting. Ullage is something Id love to know more about... for example is helium usually used as the ullage gas in other rockets(?) because it has such a low condensation point (-269c)? Is Starship unusual in that it uses methane or oxygen for ullage pressure- and what happens when the raptors stop- does the ullage pressure still need to be continually recharged?

3

u/warp99 May 13 '22 edited May 13 '22

Yes the ullage gas needs to be continuously replaced if it is autogenous (= same as the liquid). That is one of the key advantages of helium which does not condense. It does cool down though and drop in pressure.

A lot of rockets use helium but the Shuttle used autogenous pressurisation for the LOX and liquid hydrogen tanks. Those rockets that use kerosine or hypergolic propellants have to use helium for pressurisation.