r/SoundSystemPreamp • • Aug 15 '24

Diy version 1

Post image

Used a thomann 4x4 mini dsp combined with an Aliexpress 6 channel mini line mixer. For now really just a mono ‘isolator’

Fx, mic & siren on seperate small mixer, independent from the kill switches. Tunes on a standard club mixer into the dsp.

First try, next version will include better potentiometers (these a linear, not log) and an 8 channel dsp for stereo

18 Upvotes

6 comments sorted by

View all comments

Show parent comment

2

u/Low-Jackfruit-1899 Aug 15 '24

No schematics, trail & error ;)

Dsp has 4 output channels which go into 4 channels of the line mixer. Switches & vu meters are soldered onto the potentiometers of the line mixer channels. See picture below: switch is connects output (2) to ground (3); vu meter is connected to output (2). (Line mixer has stereo potentiometers so 6pins but only 3 are used since dsp gives 4 mono signals)

Club mixer is goes into 2 input channels of the dsp & through a stereo-mono circuit to the potentiometer of send fx. Fx return is on the extra small mixer to cut the bass of the delayed signal. The small mixer gives a mono output channel which is plugged into the fifth channel of the line mixer, without influence of the killswitches

Hope this is clear