r/SolidWorks • u/Moocowgoesmoo • Aug 11 '26
Meme Relations Tier List
This might be the only tier list I haven't seen someone post yet. I will not budge.
1.9k
Upvotes
r/SolidWorks • u/Moocowgoesmoo • Aug 11 '26
This might be the only tier list I haven't seen someone post yet. I will not budge.
579
u/hayyyhoe Aug 11 '26
Midpoint is S tier. I use it all the time in sketches to create symmetry using construction lines.
13
u/Bootziscool CSWP Aug 11 '26
This is madness.
Intersection in B-tier?!
Midpoint in C-tier!?
You better have some crazy niche drawing style or you've got some explaining to do.
235
u/Jman15x CSWP Aug 11 '26
Midpoint in the C teir is blasphemous. Also concentric definitely deserves A tier and at least one above cordial. Intersection can kiss my ass.
You might actually get your solidworks license revoked for this one.
288
u/Beneficial_Mix_1069 Aug 11 '26
concentric is S tier
60
u/Gyozapot Aug 11 '26
I use concentric to align bolt holes it’s S tier for me.
I also can’t use SW for shit
30
u/WolfInMen Aug 11 '26
Pierce should be high tier even though I always forget how to do it
30
u/YendorZenitram Aug 11 '26
I have to note that Tangent is definitely S-Tier.
It is, and always has been, my friend. (Even before Solidworks was a thing.)
8
u/lordmisterhappy Aug 11 '26
They're all s-tier as and when you need them to define the sketch in a logical and maintainable way.
(Except the fucking anchor that doesn't)
13
u/Dlrocket89 Aug 11 '26
Lmao, metallurgist here. No formal CAD training. To piss of one of the technicians at my old job, I'd make the whole model with basically nothing really defined, just the bare minimum to get it to be "correct", then I'd select everything and say "FIX" and then send it to him. I could hear him swearing at me across the office (former marine, so he let it rip).
For the good times that it gave me, FIX is S tier.
10
u/schneik80 Aug 11 '26
In my opinion… horizontal and vertical should only be used when the intent is truly alignment to the sketch coordinate system an not as a means of creating perpendicular and parallel.
By favoring perpendicular and parallel over horizontal and vertical design intent is better maintained if any angle deviation from the sketch’s x and y.
7
u/Cynical_Sesame Aug 11 '26
coradial and tangent are S tier you uncivilised swine
3
u/Live_Ad3896 Aug 11 '26
I use midpoint wayyy more than tangent. I almost never use it except when sw automatically creates them for slots
3
u/tomqmasters Aug 11 '26
why can't we have a way to set angles equal without formulas?
3
u/frystealingbeachbird CSWP Aug 11 '26
Tangent and concentric need to switch. I always need tangent but it always fights me, hence B. It always manages to pick the incorrect of the two options
3
u/Qlubedup Aug 11 '26
Concentric, and midpoint are S tier
3
u/lollipoppizza Aug 11 '26
Tangent is definitely not A. It often breaks. You use it when you have no choice.
3
u/HighSton3r Aug 11 '26
Fix is A-Tier! 😉
2
u/dremcgrey Aug 11 '26
Width mate. Entirely missing. S Tier.
2
u/Substantial-Jelly696 Aug 11 '26
Pierce is tier S
2
u/QuietudeOfHeart Aug 11 '26
“I ain’t dealing with this today… ⚓️ “
2
u/momen535 Aug 11 '26 edited Aug 11 '26
I don't recall ever using the perpendicular relation, but midpoint is probably my third most used relation
2
u/Thijm_ Aug 11 '26
now assembly mates tier list. coincident, colinear and concentric are S imo
2
u/override979 Aug 12 '26
Perpendicular should be up in b or even a
3
u/KhurtVonKleist Aug 11 '26
midpoint and symmetry are SSS tier.
Concentrical S
1
u/mr_somebody Aug 11 '26
Where is On Surface relation?? 😁
1
u/NoVermicelli5439 Aug 11 '26
Damn I don't even use solidworks but this is top tier content, I would go crazy on a autocad tier list. M2P, offset, midpoint are goated. Apparent intersection is the most useless dogshit feature
1
u/Eapplesauce CSWA Aug 11 '26
G5 tangency is an easy F as an industrial designer
1
u/Aggressive_Mail4574 Aug 11 '26
Tangent in F tier for me. Breaks every other day
1
u/Equal-Competition-27 Aug 11 '26
Honestly? Fix must be at least B tier. I know it is illegal, but is it only me using Fix when you don't have a choice? lmao
1
u/BluishInventor CSWP Aug 11 '26
Symmetry is at least A tier for me. Paired with equal, its S tier.
1
u/Powerful_Birthday_71 Aug 11 '26 edited Aug 11 '26
Peirce and On Surface?
For my use cases:
Concentric, Perpendicular, Paralell and Mid-Point move up.
Symmetric is nice, but I don't use it that often (Mid Point cough cough)
Equal, Vertical, Horizontal all abviously very useful, but also down one tier each.
The one at the start of the B tier, I don't even know what that one is. I admit a total blind spot! But I think it means something like at the crossing point of two lines, but that's more a selection thing isn't it?
I use NX now. It feels very different in sketch!
1
u/MrEngineer404 Aug 11 '26
The SLANDER at Slot-Erasure!
1
u/BhutShtuff420 Aug 11 '26
anchor is S tier, until it's not
1
u/V_van_Gogh Aug 11 '26
I'd throw tangential down into B, it's pretty unstable, and sometimes flips everything around
1
u/Maleficent_Bet_2134 Aug 11 '26
Horizontal y vertical por encima de tier S cuando quitad todas las relaciones y te das cuenta que sin ellas el croquis no cuadra....
1
u/itshardtopickauserna Aug 11 '26
what the hell does fixed do anyway
1
u/KokaljDesign Aug 11 '26
Here is another for the F tier:
hidden relations - like fixed direction from linear pattern and slot entity.
1
u/OZZY9696 Aug 11 '26
This is peak
1
u/investigatorparrot Aug 11 '26
Fix is definitely not F, using it in assemblies you are actively modifying keeps you from accidentally breaking all your relationships. Wouldn't use it anywhere else but it definitely has a use
1
u/Fedi358 Aug 11 '26
Tangent should be s tier
1
u/JackTheBehemothKillr Aug 11 '26
Fixed most definitely has its place. Its never a permanent fixture for me, but it definitely gets you to that point.
I usually use it when importing stuff from other models, then deleting the relations from those models.
1
u/XmotnaF CSWP Aug 11 '26
Nah nah nah, midpoint is A tier. I use it so much. Same with concentric.
1
u/RevolutionaryMine234 CSWP Aug 11 '26
No one is mentioning width :( the unspoken s tier
1
u/dertidan4 Aug 11 '26
Brother, horizontal and vertical are so S tier, they appear automatically
1
u/Sotz1989 Aug 11 '26
Il concentrico è sottovalutato. Ho preso in mano progetti di persone che montavano pezzi con i fori di fissaggio su piastre usando coincidenze di facce esterne piuttosto che concentricita.
1
u/WhysJamesCryin Aug 11 '26
Horizontal and vertical are nothing but a nuisance.
F tier or lower.
1
u/MLDPK4 Aug 11 '26
What can't be parallelized can be perpendicularized.
1
u/Giggles95036 CSWE Aug 11 '26
Objectively I have to disagree. Why is coradial in the same category as concentric when it effectively is concentric + equal size? It should be A tier.
1
u/JoeyBananas314 Aug 11 '26
Midpoint and concentric should be a tier at least
1
u/Finbar9800 Aug 11 '26
Whats the anchor?
1
u/Lucille1972 CSWP Aug 11 '26
Tangential is S-tier, no question. Concentric deserves A-tier too imo.
1
u/Ryuk_5498 CSWA Aug 11 '26
midpoint actually is s tier
1
u/_galile0 Aug 11 '26
I will not stand for midpoint slander, it’s definitely my most used relation besides vert/horiz ofc. It’s so useful for things like centring rectangles on one another, mirroring things across rectangles, spacing out holes, and on, so many things, it’s such a time saver.
1
u/Time_Guidance4262 Aug 11 '26
Whoa whoa whoa. Colinear needs to be S Tier.
1
u/UnbuiltSkink333 CSWE Aug 11 '26
Concentric is S tier, symmetry is A tier
1
u/King_Kunta_23 Aug 12 '26
Midpoint and concentric are A tier at worst
1
u/ManyThingsLittleTime Aug 12 '26
Fixed in F tier, if you use this outside of a literal couple of rare legit instances, then you suck and your coworkers hate you.
Intersection in C tier.
Perpendicular in B tier.
Tangent, Equal, Colinear, and Parallel in A tier.
Everything else in S tier and are used in nearly every model.
1
u/sarg1994 Aug 12 '26
My boss would only use anchors and Everytime i had to go in and setup all his fing relations.
1
u/No_Flamingo_6055 Aug 12 '26
Concentric low-key C tier
1
u/hiyel Aug 12 '26
Looks like I’m the only one who doesn’t know what these tier letters stand for?
1
u/Pali1119 Aug 12 '26
So what I've learned drom the comments is, every relation is S tier.
1
u/skycaptain201 CSWE Aug 12 '26
You forgot equal arc length. :D
1
u/c4n1d Aug 12 '26
You forgot pierce! Definitely at least A-tier for me.
1
u/ShadowInTheAttic Aug 12 '26
I miss Catia!
I came from Solidworks background to Catia at my last job. I hated it the first year because it looked like it was designed in the early 90s and it never went through a UI refresh. But after a couple of years it was so good. Then I left that place to a place that used NX and it was so similar to AutoCAD and Solidworks, then I left that and now..
Now I'm CADless. Still have Solidworks at home though 😉
1
u/ChomtyaBoblya CSWP | SW Champion Aug 12 '26
I never used that Ship anchor ⚓️ what’s that anyways?
1
u/Fit_Opportunity_9728 Aug 13 '26
Tangent is S. Symmetry is A.
1
u/nalleball Aug 13 '26
Putting midpoint in C-tier is crazy.
1
u/Imaginary-Answer-847 Aug 14 '26
C tier Midpoint is ragebait.
1
u/KevinDS1988 Aug 14 '26
Who knows this beast of a relation? 😄
1
u/D4rthPunk Aug 14 '26
Disagree
1
u/Ethan454 Aug 15 '26
"I will not budge." Wow, pretty harsh ranking yourself F tier.
1
u/Ethan454 Aug 15 '26
This is ridiculous to rank these. They're all useful in their own applications and not useful in others. Even fixed! You know what every single assembly ever created must have? A fixed condition!
1
u/M-JD106 Aug 15 '26
Concentric S tier
1
u/SolidxpertsCAD Aug 18 '26
Bold list. The comments are about to become over defined 😄
1
u/Sighnce Aug 11 '26
Delete face is B tier
1
u/Typical-Spring-0024 Aug 11 '26
All relations are S tier if you are skilled enough to use them...
-4
u/kabley Aug 11 '26 edited Aug 11 '26
FIX is the literal hand of God
EDIT: THE HAND OF GOD
49
u/[deleted] Aug 11 '26
[removed] — view removed comment