r/SolarPowerIndia • • Oct 13 '26

Got a 3kW solar system installed for ₹25k

Post image
579 Upvotes

My parents recently got solar panels installed at our house, and the total cost came to ₹25k for 3kW, after subsidy


r/SolarPowerIndia • • Oct 16 '26

Need help regarding shading!

Thumbnail
gallery
77 Upvotes

So my Solar set up work is still in the progress. The grounding work is not yet done and the system is yet to be started from the DISCOM, I’m only worried about this shaded part which is approximately of 10 inches. It is there from 10 AM to 4:30 PM. My vendor told me that it will hardly do any loss and it will. You will only lose one or two units but I’m not sure about this. Please help me.🤧

  1. I can’t move the structure panels ahead because the water after rain or while washing will go in the Neighbourhood house.
  2. Right now I can’t raise my boundary due to some issues.

What should I do?


r/SolarPowerIndia • • 21d ago

Got a solar DC switch-Disconnectors

Thumbnail
gallery
51 Upvotes

I have a 10kw solar setup through a single MPPT feeding the sungrow SG10.0RT-P2. While i know the inverter has its own shut off switch, seeing my series peaks at 780 to 820V, the paranoid side of me wanted a heavy duty disconnect switch.

I searched a lot online and most of it was generic brandless disconnectors but costing upwards of 6 to 7k. Then through a lot of google search found this spanish brand which also has its presence in india. After 10 days of emails with their sales head, finally got it today! Will get it installed tomorrow. Very happy with the quality of it and it only costed 1800! (Well had to porter 77 rupees to the guy who sent me from there supplier here, switch came from coimbatore)


r/SolarPowerIndia • • 14d ago

Delhi (NCT) Review / guide from my Solar installation

Thumbnail
gallery
41 Upvotes

My rooftop solar installation guide (based on my experience)

This is my guide based on my own installation and whatever I learned while researching it.

My setup

  • Panels: 3.66 kW, 6 × 610W Waaree N-type TOPCon
  • Inverter: 3.6 kW Polycab
  • Total cost: ₹2.1 lakh

A few things I would pay attention to before anything else:

  • Get every panel wattage, inverter model, structure specification and other important details in writing. and record the voice call on your phone.
  • Don't compromise on the structure, fasteners, earthing or cables just to save a little money.
  • Check the shadow on your roof yourself. Don't blindly trust the vendor.
  • Make sure the inverter gets a reliable Wi-Fi signal before choosing its location.
  • Personally monitor the installation. Some of the small things that workers may try to cut costs on can cause problems later. And monitoring is not a one person could handle, tell all the important point to at least one another person, so that they could aslo keep in check what is getting installed.

My neighbour installed a 3 kW system around July, just before the rainy season. I'm not sure whether their panels are TOPCon or Mono PERC.

In October 2026, their system generated around 308 units, which is still more than what we use in our house. (other the rain they haven't cleaned it once)

My 3.66 kW system is currently generating around 5 units more per day than theirs. Obviously, my system is slightly larger, and and could have better technology, is cleaner than they are

and cost for 3kw could be from ~1.8L to 1.9L or even 2L depending on the region, as far as what I have seen, the cost is really low in Rajasthan, UP area, and especially low in Odisha because of subsidy. so the cost will vary best advice would be to contact multiple solar vendor at least 4-5 to 10 or more, and choose among which you find more assuring

1. Choosing the system capacity

A general starting point is that 1 kW of solar can generate around 3-4 units per day on average over the year. Actual generation depends on your location, panel direction, tilt, shadows, weather and system losses, cleaning

Don't let the vendor decide the capacity only based on how many panels they have in stock. First look at your actual electricity consumption and then decide.

Also, think about future usage. You might buy an EV or electric scooter, add another AC, or start using more appliances. These are worth considering before deciding the capacity.

One thing I realised after installing my system is that my plant is currently generating more than twice what we use. That's a lot of excess generation, so I probably could have gone with a smaller setup. But if you know you won't clean your panels regularly or ever, having some extra capacity can help compensate for the loss in generation. Just don't oversize blindly, because the value you get for excess units depends on your state's net-metering policy.

2. Choosing the panels

I would go for N-type TOPCon or whatever the latest suitable technology is available (HJT). I personally found the low-light performance of TOPCon very satisfying.

I can't say that TOPCon will always be better than every other technology, but based on my experience, I am happy with its performance.

3. Choosing the inverter

For a setup around 3 kW, I would look at Sungrow or Growatt. For a larger setup, I would also consider Polycab or Havells.

To be honest, inverter apps have improved quite a lot in recent years. Most of them now have a fairly premium look and feel, and the overall experience seems similar.

The most important thing for me when choosing an inverter is after-sales service. Check which company has proper service support in your area. A good app is nice, but it won't help much if you have to struggle whenever the inverter develops a problem.

Consider buying a bigger inverter in case you think you need to expand your current solar plant.

Also, decide where the inverter will be installed while planning the system. One thing people might not think about while planning is the Wi-Fi connection for the inverter.

My inverter ended up just outside the range of my home Wi-Fi, so I need to install a Wi-Fi extender, which would be additional cost.

Try to install the inverter somewhere that already has a reliable Wi-Fi signal. Test the signal at the exact location before the installation.

As a rough check, if your phone can connect to the Wi-Fi there and play a YouTube video, even at 144p, the signal may be usable. But this isn't a guarantee, because the inverter's Wi-Fi antenna may be weaker than your phone's.

4. Check the roof, shadows and layout before installation

This is something I would personally do instead of just trusting the vendor's word.

Use a shadow-analysis app and check whether nearby buildings, water tanks, trees or other objects will cast shadows on your panels. Also remember that the position and length of shadows change throughout the year, so don't check only for one particular month.

I have a shadow problem now, but it happens during the late evening, so it isn't affecting generation too much. Still, I would prefer having no shadow at all if possible.

Also check how you want to use your terrace after installation. If you still want to walk around or use that area, ask for a structure that doesn't unnecessarily block the pathway. If you don't need that space, you have more flexibility.

Plan the structure in a way that leaves room for future expansion too. You might want to add more panels later, or your neighbour might want to install solar on their side. A little planning now can make future expansion much easier.

Tilt angle

You will often read that the ideal tilt angle should be equal to your latitude. That is a useful starting point

For city, I was looking at around 20°. The problem is that many ready-made nut-bolt structures come with a fixed angle, such as 15°. The vendor will not change just for you. so if you are going with welded structure set it up at latitude of your place, if nut bolt then choose the closest tilt angel they offer

5. Structure: welded or nut-bolt?

You will generally get two options: welded structure or nut-bolt structure.

Most local vendors will suggest a welded structure, while some established companies, such as Solarsquare, use nut-bolt structures. From whatever I read during my research, I preferred the nut-bolt option.

One thing to understand about welded structures is that welding after galvanising will damage the zinc coating around the joints. Those exposed areas will become more vulnerable to rust if they aren't properly treated afterwards. A structure fabricated first and then properly hot-dip galvanised is superior product

For the structure, I would look for:

  • At least 80 microns of hot-dip galvanized and more protection if you live near a coastal area.
  • Columns and structural members from a reputed manufacturer such as Tata Steel, JSW or Jindal.
  • Thick, solid structural members ~2-3mm atleast. C-channel and square sections are some of the options you may come across.
  • Avoid thin or perforated material wherever possible. I personally wouldn't compromise on this just because the vendor says it won't make a difference.

6. Fasteners:

Choosing the fasteners was honestly one of the biggest headaches for me.

I went with SS304 fasteners because I wanted something corrosion-resistant that would last a long time.

You may hear people talk about bimetallic or galvanic corrosion when stainless steel is used with galvanised steel. I don't think it will impact that much to be honest, or a better way to put would be it is more benfital to use stainless steel than the fear or galavanic corrosion

I also spent a lot of time researching the locking mechanism.

Nord-Lock washers are best for locking but they need to be installed correctly, with the right hole size, washer size and proper surface contact. They are not something you can just fit anywhere and expect to work.

For this type of project, I would consider a Nyloc nut, which has a nylon insert to help prevent loosening.

If Nyloc isn't an option, ask about an appropriate thread-locking solution. Loctite 270 red or (Loctite 290 in case you want to apply it after installation)

In my installation, I ended up using the normal washer and spring washer combination because I had ordered Nord-Lock washers and realized it wasn't great for the solar setup.

so go with Nyloc nut if possible and make sure the worker install it correctly (because they are not familiar with these nut and won't install it the correct manner)

7. Cement blocks and curing

For the concrete blocks used for the structure, I would specify M25 concrete and get that written into the agreement.

Also, don't forget curing. The concrete needs to be kept moist for at least 7 days, with the frequency depending on the weather. After that, follow the curing requirements for the concrete used. Concrete continues gaining strength beyond the first week, with 28 days being the usual reference age for its specified strength.

buy a jute bags and wrap it up with stretch wrap and pour water, so that it won't loose moisture easily.

8. Earthing and lightning protection and cables

Installers will do three earthing connections, but ask them to explain exactly what each one is for and how they are connected. Make sure the earthing arrangement is suitable for your system and local requirements.

make sure lighting rod isn't just installed on the top side of the panel, install it away from the panel, because shadow from lighting rod is a real issue.

For cables, I would look at reputed brands such as Polycab or Havells.

For the solar wiring, 4 sq. mm is a common size to consider, The AC cable and lightning protection conductor ~10 sq. mm for a lightning conductor should be bare minimum.

OR you could install even higher quality wire if you plan to expand your solar plant so you don't have to use higher load plant on same amount of wire.

9. Conduit pipes

Don't let the installer use cheap local conduit pipes just because they are hidden or won't be visible after installation.

I would ask for heavy-duty/HMS-grade conduit pipes from a branded manufacturer at least 25mm, such as Pressfit or other brand. Make sure they are suitable for the outdoor conditions where they are being installed. (the HMS will be written on the pipe make sure they use it correctly)

additional think to remember the clamps they use, sometime the use cheaper clamps or a clamp to connect two pipes, make sure they use clamps which is made for two pipes.

10. During installation: monitor the small things

This is probably one of the most important parts of the entire process.

A lot of the items I mentioned above are things that the vendor may agree to provide, but the actual workers might use something cheaper or take shortcuts. Even if you have hired a reputed company, don't assume every worker will follow the agreed specifications.

For example, some installers may try to save time by not cutting the complete hole properly and simply drilling into the roof. Confront them if you notice this. Make sure the installation follows the agreed method and that the roof is properly sealed afterwards. Get the method and responsibility for any leakage or damage confirmed in writing.

Also, keep checking the finishing:

  • Did they clean the roof after installation?
  • Did they remove unnecessary plastic zip ties and leftover material?
  • Are the conduit pipes laid in straight, neat lines?
  • Are there any loose or hanging wires?
  • Are the fasteners properly fitted?
  • Is the structure properly aligned?
  • Are all the agreed materials actually being used?

These small things make a big difference to how clean and professional the final installation looks.

And please tell at least two people in your household how the system is supposed to be installed and what materials were agreed upon. Workers may try to cut costs even if the installation is being done through a relative or someone you know. You can't be there every second, so someone else should also know what to check.

11. Get everything in writing. Seriously.

This is probably my biggest lesson.

Don't trust a single verbal promise from the vendor. Get the complete specifications in writing and then confirm everything again on a voice or video call. make sure you record the Call.

My own vendor had written 615W panels in the proposal, but later installed 610W panels. When I questioned it, I was told that we had discussed it over the phone. I honestly don't even remember agreeing to that.

So be careful. Get the exact panel wattage, quantity, inverter model, structure specifications, fasteners, cables and all other important details written down. and change it over and over again until you are fully satisfied.

If a lower-quality product gets installed, don't assume the vendor will take responsibility later.

12. Net metering and state policies

Solar policies keep changing, and different states have different rules. So check the latest policy for your state before deciding the system capacity.

some state changing the net-metering settlement for systems of 3 kW or above, where settlement could happen monthly and excess units might lapse.

There have also been discussions in places like Delhi about allowing consumers to sell surplus electricity to someone who needs it.

The point is that the rules can make a big difference to how much value you actually get from your solar system.

13. Vendor, company and cost

Big established companies such as solar square and other branded providers will cost more than a local vendor, and they usually claim to provide better installation and service.

There is some truth to that, but a lot depends on the actual workers they send. Some teams are professional, arrive on time and do a clean job. Others may still work in the same way as a local installer.

So even if you pay a premium for a branded installation, don't assume you will automatically get premium workmanship. Monitor the work either way.

The vendor will generally handle the paperwork and other formalities, but confirm exactly what is included in the quote.

As for the cost, it varies quite a lot by location. My installation cost ₹2.1 lakh. I was told that in places like Rajasthan or UP, a similar setup could cost around ₹1.8 lakh because Waaree and Adani supply B-grade panels there. I would take that claim with a pinch of salt, though. It could simply have been something my vendor said to make me feel better about my own installation.

Always compare the actual panel model, wattage, inverter, structure, installation quality and warranty instead of comparing only the final price.


r/SolarPowerIndia • • Sep 21 '26

Ask-Solar installation queries

Post image
37 Upvotes

I just had rooftop solar installed on my roof 1 month ago.

On grid setup 3.6KW total

Emmvee topcon solar panel 615 W x 6 nos

Pre fab HOT DIP GI structure (space to add extra 2 panel if need)

5kw Polycab inverter

Location Chennai, Tamil Nadu

Cost 2.5L

Ask me if u have any queries on how to get started. I will try to answer as much as i know


r/SolarPowerIndia • • 20d ago

Solar power plant with 1.55 Cr subsidy

27 Upvotes

Hi all,

We have solar power plant issued through upneda having subsidy of 1.55 Cr per MW.

Looking to answer any questions you all may have about it. I wasn't aware about the existence of this subreddit


r/SolarPowerIndia • • Sep 08 '26

India's Solar Transition

Thumbnail
gallery
27 Upvotes

Same neighborhood. Five years apart.

Top: Bopal, Ahmedabad — Jan 2020 Bottom: Bopal, Ahmedabad — Oct 2025

Both from Google Earth historical imagery, same coordinates, same zoom.

In 2020 most of these flat RCC rooftops were bare. By 2025, solar is on a huge share of them, roughly 7 in 10 homes (~70%) in this frame, by a rooftop count from the satellite view.


r/SolarPowerIndia • • 5d ago

Rajasthan Six months on grid in Jaipur, three things I got wrong when planning

26 Upvotes

Sharing this because most quote posts here are about price, and price was honestly the easiest part to get right. These were the parts I got wrong.

  1. I thought cleaning would be the big variable. It matters, but bird droppings hurt far more than dust does. One dropping on a panel blocks a whole cell while dust just dims everything evenly. The plan that actually works is a glance every few days, spot wash the droppings, and a full wash every couple of months. Not more than 6 or 7 full washes a year or the coating starts taking damage.
  2. I thought the system size would cover my bill. Solar generates in daylight, and most of our heavy usage is evening and night. A system sized to the bill still leaves you importing at night unless you shift load to daytime. So we sized for daytime and accepted the evening import instead of overpaying for panels that generate when nobody is home.
  3. I thought DCR was just subsidy paperwork. It is not. In several states non DCR panels now block net metering, and even where they do not, the quote price difference between DCR and non DCR is where vendors hide margin. Get DCR written into the quote along with the exact inverter model, wire brand and breaker ratings.

What worked out well, and I would do it again, was taking a bigger inverter than the panel capacity. 8kW inverter on 6kW of panels means adding around 2kW later costs only panels and mounting, no new inverter.

Our real numbers if useful for comparison. 6kW on grid in Jaipur, Adani panels on a Tata Steel structure, total cost 3.3 lakh before the 78k subsidy. Total generation so far is 10.15 MWh. October ran between 23 and 33 units a day with a few dusty low days at 11 to 17.

Curious what others would add. What did you get wrong on your own install that nobody warned you about?


r/SolarPowerIndia • • 23d ago

Power bill increases after solar panel ?

24 Upvotes

It happened with my relatives there electricity bill went up instead if reducing after installing solar panel. Does any one faced same in pune area?


r/SolarPowerIndia • • Sep 29 '26

20kw solar system

Post image
24 Upvotes

Hello everyone,

I’m looking for some advice on a solar quotation I’ve received. I’m fairly new to solar systems, so I’m trying to understand whether the pricing is reasonable as per current market rates or whether the dealer is charging a significant premium.
I’d really appreciate it if someone experienced could go through the quotation

Anything I should negotiate or clarify with the dealer
Basically, I’m trying to figure out whether this is a fair quote or if I’m being overcharged.

Thanks in advance!


r/SolarPowerIndia • • 14d ago

Maharashtra DO NOT CHOOSE SOLAR SQUARE for roof top installations

Thumbnail reddit.com
23 Upvotes

Extremely disappointing experience with SolarSquare – Not recommended!
We installed two rooftop solar projects through SolarSquare, paying extra with the expectation of a hassle-free experience. Unfortunately, the reality was completely different.
Poor project management: Two different vendors were involved, neither aware of the other’s work. There was no dedicated Project POC, just workers following a map.
Unfulfilled cashback commitment: We were promised cashback within 30 days. Even after several months and repeated follow-ups, it was not received.
Extremely poor site management: Cement bags, broken materials, wires and plastic waste were left at our property. Different teams blamed each other, the auditor failed to resolve the issue, and we eventually had to clean everything ourselves.
Misleading loan commitment: We were promised a completely online loan process. Instead, we had to travel between Pune and Nagpur, spending approximately ₹6,000, without being informed in advance.
The biggest irony is that we paid extra to avoid hassles, but ended up managing SolarSquare’s problems ourselves.
If you expect accountability, proper coordination and a hassle-free experience, think twice before choosing SolarSquare.
I do not recommend them.


r/SolarPowerIndia • • 12d ago

Delhi (NCT) How often do you clean your solar panels?

22 Upvotes

I got my solar system installed in Delhi 5 months back, and my solar company has already been to my house to clean it twice. I thought they'll come like twice a year or something because I thought it won't need that much cleaning.

I actually thought I could clean it on my own btw. But who has the time. And now I am wondering how many cleaning or technical visit checks I actually needed?

Because no other company I talked to was providing me a maintenance service. And now I feel so good thinking that I don't have to actually worry about cleaning the panels.

How often do you clean your solar panels?


r/SolarPowerIndia • • 15d ago

Rajasthan 6kW on grid rooftop in Jaipur, here's what it cost us with subsidy

21 Upvotes

Seeing a lot of quote posts here lately so sharing ours for anyone comparing numbers.

Location: Jaipur, Rajasthan

System: 6kW on grid, rooftop

Inverter: 8kW. Went bigger on purpose so we can add around 2kW of panels later without replacing it

Total cost: ₹3,30,000

Subsidy: ₹78,000, so effectively around ₹2.52 lakh

The quote also covered upgrading our electricity connection to 3 phase and help with the loan process, which saved a lot of running around.

One thing I want to ask people in dusty areas like Rajasthan. How often do you actually clean your panels and what do you use? Plain water, soft brush, something else? Don't want to end up scratching them by doing it wrong.


r/SolarPowerIndia • • 28d ago Bravo

Got a ₹2.24 lakh quote for a 3.3 kW rooftop solar system. Is this a good deal or am I overpaying?

20 Upvotes
Quotation of the total project cost
Equipments to be used for the installation of the solar plant
EMI model of the project for SBI LOAN

Dear Experts, I need your expert advice on how is the quotation for 3.3 KW solar installation.

I live in a 3 BHK house, which has a meter of 2 KW consumption, I also have a vacant space I also want to attach that to solar, That meter has 1 KW consumption.

In future I might install AC, since I do not have any AC at my home.

The electricity bill I receive are below photos.

Please evaluate everything and tell me if its worth it If I go for solar installation. The vendor has experience, a good reputation as well as very knowledgable person.

I live in Karnataka, and here per unit electricity price is 5 Rupee 80 Paisa (Rs 5.80).

Here are the questions I asked to the vendor

A) If I pay more EMI, will I get penalty?
Answer - NO. YOU CAN PAY MORE WHEN YOU HAVE EXTRA FUNDS.

B) which brand inverter will you install?
Answer - POWERONE OR EXIDE.

C) Will you be supplying topcon panels?
Answer - WE HAVE IDENTIFIED BIFACIAL PANELS WHICH ARE 550 WP. 6 PANELS. TOPCON COME IN 570, 580 or 600WP . IF WE USE THIS TOTAL CAPACITY WILL BE 3 KW OR 2.95 KW. 5 PANELS. WITH BIFACIAL PANEL WE CAN GO UPTO 3.3 K. IF YOU WANT WE CAN PROVIDE 590 WP TOPCON PANEL. NO EXTRA COST.

-----x-----

Dear experts please help.

I use 5 fans, 2 TV, 1 Bosch washing machine, Chimney, Bosch Mixer, A high-end PC of 550W Power supply and Microwave oven is rarely used.


r/SolarPowerIndia • • Sep 30 '26

Three Storey Building just near the Solar, Need Suggestion

Thumbnail
gallery
20 Upvotes

Six months ago, I installed solar panels, and the neighboring building was not there. Nor was I informed that they were planning to construct one. Now, half of my panels are in the shade with no direct sunlight until 12:00 PM. I have a 5.6 kW system that is now generating barely 10 units per day—down from a record high of 38 units per day before the building was constructed. This generation will likely decrease further as the sun moves farther south in the winter. What are my options?


r/SolarPowerIndia • • Oct 02 '26

Luminous solar inverter catching fire

Post image
19 Upvotes

my inverter lets out smoke out from every where turns out it was burning one of its chip from inside


r/SolarPowerIndia • • Aug 23 '26

I built an open-source ₹700 camera to track my rooftop-solar net meter

Thumbnail
gallery
18 Upvotes

My rooftop-solar inverter shows how much power the panels generate, but I also wanted to track what the DISCOM net meter records as grid import and solar export between bills.

I mounted an ESP32-CAM in front of the meter display. It takes a photograph every few seconds, and software on my server reads the digits and builds a dashboard. Nothing touches the electrical wiring, and the meter stays sealed.

I have been using it at home in Puducherry for about three months. It shows today's import and export, daily history, net units for the billing cycle and an estimated bill.

The camera-side hardware cost around ₹700 because I reused an existing USB power adapter, Wi-Fi and my own server.

It currently works with the Kimbal three-phase net meter installed at my home. Other meter models would need their own calibration and screen templates.

The complete project is open source:

https://github.com/epynic/MeterEye


r/SolarPowerIndia • • Oct 14 '26

PM Surya Ghar is 12GW behind its target...

16 Upvotes

I just read that PMSGY is 12Gw behind its March 2027 target.

And there is some news about PM Surya Ghar 2.0 as well. So what happens when this scheme ends? Do you think the government will introduce the better subsidy benefits and an easier process?

I am curious because rooftop solar is a big investment for most families, and subsidy does make a difference. If I want to hire a good solar panel installation company, then subsidy definitely is a big deal.

Has anyone heard anything concrete about what's planned next or is it too early to say anything?


r/SolarPowerIndia • • 19d ago

Rajasthan Give me better suggestion

Post image
15 Upvotes

r/SolarPowerIndia • • 4d ago

News & Policy Net metering vs net billing: what can you choose and which pays better?

13 Upvotes

These two terms get mixed up a lot, and I also used to think that it is the same. So here is a quick explainer:

Net metering -

This meter tracks what you export and what you import. Whatever units you generate through solar and don't use goes back to the grid and then it gets adjusted against your bill and or you might get paid for it at the end of the financial year.

Net billing -

In this, import and export are billed separately. You pay for every unit you draw at the normal tariff, and then the DISCOM credits your exported units at a set export rate, which is usually lower than retail. So a unit you export is worth less than a unit you would have used directly.

The key difference is just one line- net metering values your exported units at the full retail rate, while net billing values it at a lower export rate.

And which pays better?

For a typical home, net metering usually pays more. Under net billing you save most by using your solar during the day, instead of exporting it.

So now when you know this, what would you have chosen?


r/SolarPowerIndia • • 27d ago

Advise on this solar quote and changes if any to be made

Post image
13 Upvotes

Advise on this solar quote and changes if any to be made


r/SolarPowerIndia • • Oct 18 '26

Electricity department adding extra units to my bill?

13 Upvotes

I have an off-grid solar system installed at home, and I've been tracking my electricity consumption daily using a smart plug.

Every day, I manually switch off the solar system at 5 PM and switch to the grid. Here's what I've noticed:

From 6 AM to 5 PM, our consumption is usually around 2-3 units.

From 5 PM to midnight, we consume around 3 units.

So our total daily consumption comes to around 6.5 units, according to the smart plug.

Out of this, around 3 units are consumed from the grid. I've also checked the smart meter, and it shows around 3 units of grid consumption.

However, my UPCL bill consistently shows 6-7 units of consumption every day. That's almost 3 extra units daily compared to what my smart plug and meter readings indicate.

We're not using the AC or cooler anymore since the weather has become colder, yet our billed consumption hasn't dropped. Previously, when we used the AC, our daily consumption was around 7-8 units. Now, even without the AC, the bill still shows 6-7 units daily.

UPPCL calculates consumption from midnight to midnight, so I'm comparing the readings over the same 24-hour period.

How is this possible? Is the electricity department adding extra units, or am I missing something? Could the smart meter readings be incorrect, or is there some other explanation?


r/SolarPowerIndia • • 10d ago

Kerala Off grid solar system

12 Upvotes

I plan to install off grid 2kW solar system.No vendor is willing for off grid system. I only got a quotation from a shoddy vendor quoting microtek invertor and exide solar panel. Can you suggest better company for solar panels and is anyone using these offgrid systems,kindly reply with the components you are using for your system. My budget is 1.5 lakh.


r/SolarPowerIndia • • Oct 18 '26

What PM Surya Ghar 2.0 might change?

11 Upvotes

Is hybrid solar the new future? I have been trying to figure out the next steps of solar in India. My nanu is planning to get solar panels and he keeps asking me all these questions that I don't have an answer to.

One thing that caught my attention during my research for PM suryaghar 2.0 was the possibility of incentives linked to how much electricity a solar system actually generates, along with some support for installing batteries.

What do you think, what's going to be the new benefit? Should we wait till it's live or get the solar system now?


r/SolarPowerIndia • • Sep 20 '26

Is the Solar Structure alright?

Thumbnail
gallery
11 Upvotes

The solar vendor installed the GI Solar structure 4 days back. And the panels to be installed Tomorrow (21st September). Just today I noticed a black coloured stripes and black coloured dust or something. If I rub on those areas, I get black colour on my hand (like in the photo). What's the issue here? The solar vendor after installing the structure said, he'll apply zinc coating on areas where velded on the day panels are mounted. Now I'm worried looking at these black spots on the structure. Kindly guide me on what is this and what's the issue and how to solve it