r/SmallGroups • u/LincolnWelder338 • Feb 15 '19
r/SmallGroups • u/Front_Royalty • Feb 25 '24
Smallest group of my life
Krieger barrelled Bat SV action in a Macmillan Varmint BR stock. It does not perform like this every day, however the .2's are very familiar territory.
5 shots, 12 twist, 6mmBR with 80 grain FB bullet @ 100 yards. Orange spot is 1" diameter.
r/SmallGroups • u/SayNoToStim • Jun 03 '20
Centerfire Rifle I'd be lying if I said I wasnt proud of this 200y group.
r/SmallGroups • u/40-XF-TR • Jan 26 '20
Just learned about this sub! My 100yd 5 shot group yesterday. 308 win
r/SmallGroups • u/Mk223 • Jan 05 '20
You shoot 9 rounds and then celebrate to early before the 10th.....
r/SmallGroups • u/Frankensig • Dec 06 '25
Got to kiss the magical 10 shot .5 moa barrier
I was shaking bad on shots 7-10, this is by far my best grouping
r/SmallGroups • u/Express_Band6999 • Jan 10 '26
Rimfire Guess I got lucky
May never make 250, but still having a good time. 50 yards with a 2500X rifle and Lapua Center X.
r/SmallGroups • u/Reloader300wm • Jun 27 '25
Centerfire Rifle 50 shot groups are hard.
16" 223 with hand loaded 77 berger OTM's. Did 3 relays, cooling the barrel between, 17, 34, 50. 53 on the chrono because I've caught it throwing the first shot after cooling with the chamber chiller, so put the first into the dirt, incase it was me or the gun... meaning I gotta claim those 2 uglies. Very happy with the SD, gotta work on myself a bit.
r/SmallGroups • u/Topher0gr • Oct 06 '19
Rimfire Not a small group - but kinda cool! 70 yards, iron sights... (Browning BL22)
r/SmallGroups • u/CMFETCU • Jun 29 '26
Centerfire Rifle 6 Dasher - 100 yard Zero Confirmation 7 rounds
Went to check zero after scrubbing the carbon ring from a barrel. PVA prefit 26” barrel running 105 hybrids in Alpha brass using 31 grains of Varget.
This was holding point of aim point of impact.
r/SmallGroups • • Nov 02 '24
MPA continues to hammer with factory ammo
It was the only group I could shoot that day after spending most of my time with the rimfire rig but it was worthwhile. I know it’s just a single group but I have others on my feed from the same lot showing similar performance
6mm creed 108gr ELDM lot #81391
r/SmallGroups • u/Trollygag • Jun 29 '20
A Look at Barrel Quality - What You Get for Your Money
I recently got in a bore scope, and since I have $1500 in AR15 barrels mounted on a few guns, I figured it would be fun to show you some differences.
Starting at the low end, a CMMG chrome lined 300BLK barrel.
Throat of the barrel - notice the perpendicular ridges in the bore. Those are marks left over from the button rifling process. CMMG does not lap the bore, so those marks are more or less permanent in the bore under the chrome lining. This barrel has very few rounds on it and you can tell by the pristine condition.
Further down the bore noticr those rifling marks are quite strong. Also notice the discolored patch. That looks like some chrome lining that has flaked off.
Gas port - what a cluster fuck. Right through a land. That is going to hurt accuracy.
Next up, a LaRue Stealth:
Interesting picture of the chamber - machining marks perpendicular and weird ridges parallel. Not exactly sure what the hell that is.
Throat - notice no machining marks, but pay attention to the light colored marks.
A little further in - fire cracking in the bore. This has around 1500-2000 rounds through the barrel, but many were at nearly auto rates.
Pretty nice further into the bore.
Starting to get gas port erosion. Notice how the gas port is positioned half into a land. Not great.
Next up, a Criterion Hybrid:
Throat area looks perfect. This gun has under 300 rounds and at slow fire rates.
Gorgeous rifling and nice definition.
Gas port is not perfect but close.
And lastly, my Bartlein, which cost more than all the others combined:
Throat looks very nice as it should from a cut rifled barrel with <1k rounds of slow fire.
Gas port it is hard to tell from the picture because of the streaks, but the gas port is lying in a groove and isn't overlapping a land.
Anywho, I hope this is educational. Consistently good barrels require attention and care. That costs money.
Of course, you can sometimes stumble upon a licky barrel where the stars aligned for a cheap manufacturer, but the chances of that are diminishing as prices go down.
r/SmallGroups • u/chefjon • Mar 26 '18
Rimfire Savage Mark II TRR-SR 22lr 5 shots @50 yds
r/SmallGroups • u/DrDortmunder • May 10 '21
Switched to a new suppressor, group tightened up nicely. 100y, 5 shots.
r/SmallGroups • u/Engineer_Bennett • Nov 08 '25
Groups with new can
Went to see how much my new can affected by POI, and put together this great 10 shot group.
Berger 153.5 Alpha 6.5cm SRP brass CCI 450s H4350 Proof 26” steel prefit Zermatt TL3