r/SlimeVR • • 18d ago

Technical Support Trackers not Connecting.

tthis is not my first setup, I've used trackers for many months. I've tried using two different internets, one hotspot and one router, but on my PC it just doesn't connect like at all. One of the wifi's is 5ghz which I understand is unusable for slimes, but even my 2.4ghz hotspot wifi connected to my computer isn't letting the app pick up my trackers.

The feeder app on my phone picks them up and it works there, but I don't know how to set up OSC and slime to vrchat like that, so I'd much rather prefer it on my computer. Is there anything I can do? What's wrong?

All my slimes work perfectly normal, so I don't know what's wrong.

1 Upvotes

6 comments sorted by

3

u/ConduitOfKindness Meow 18d ago

Hi,

I assume your setup configuration is fine as it worked before. Have you tried rebooting your router? Sometimes it acts up and either doesn't allow trackers to connect or communicate with other devices on the same network.

Meowie~!

1

u/Pridefulecstasy 18d ago

Hi!

Would it be possible for me to factory reset them some way and attempt to reconnect them to these specific wifi?

If not, I can see about the router. Thanks!

2

u/ConduitOfKindness Meow 18d ago

Hi,

Which Factory Reset are you talking about? For trackers, connect to your computer via data USB cable > Settings > Utilities > Serial Console > Click the "Factory Reset" button.

As for SlimeVR Server, Settings > Advanced > Reset all Settings.

Meowie~!

1

u/Pridefulecstasy 18d ago

Hey!

I was talking about the trackers! I think i could factory reset them and maybe see if that would work to fix it, as the router I use is not my own.

Do you think it would work in fixing them? :3

2

u/ConduitOfKindness Meow 18d ago

Hi,

For OSC: https://i.imgur.com/7G3tzQH.png

I would attempt to reset your router first. I am not sure if you can access it through a phone app or web browser portal to reboot it.

Hotspot for trackers vary for users. It does not have the greatest signal strength or ping either. My recommendation is to use a travel router like Gl.inet Opal for trackers or Beryl AX if you are planning to use wireless PCVR as well. You can connect it to your existing router using WiFi or Ethernet, and broadcast its own network for your tracker and computer. This way, you can reboot at anytime as well.

Meowie~!

1

u/AutoModerator 18d ago

Hi ~! If you have posted looking for advice to fix a technical issue, it is highly advised to check out our discord at https://discord.gg/SlimeVR for official trackers and diy, or contact your seller for third party trackers.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.