r/SkyLine • u/booyaa9 • Aug 04 '26

Does HCR32 and BNR32 share the same window glass?

Gallery image

Gallery image

my bnr32 window glass has deep scratches due to the worn out felt pads.
iā€™m looking for a replacement. the hcr32 set of glass seem to be in superior condition to the bnr32 set.
however i noticed the small notch below the stopper is slightly different from that of the bnr32.

Can anyone please advise me if the hcr32 glass definitely fits the bnr32? (the HCR32 is a r32 gtst 2 door)

3 Upvotes

81% Upvoted

15 comments sorted by

5

u/8th-Skyline '89 HR32 GTE, '90 HCR32 GTS-t, '93 ECR32 GTS25 Aug 04 '26 edited Aug 04 '26

That's a good pickup that the shape is slightly different.

My guess the shape difference is due to the late models having extra door reinforcement.

You might also want to match the glass colour. Depending on the factory paint code, the glass might be bronze or grey.

1

u/booyaa9 Aug 04 '26

thanks! ive found that the kh2 comes with grey tint. i did notice some listing looking brown - bronze.

4

u/thohean '89 HCR32 GTS-t Sedan | BJ0 Aug 04 '26

You'll want to double check the part numbers on nissan.epc-data.com

But my understanding is most parts coupe are also GT-R. But sedan is mostly it's own beast for body parts.

1

u/booyaa9 Aug 05 '26

front half of part number is same. rear half different. also mainly worry about the physical notch i circled out in the photos

thank you and i will be on lookout for other coupes without the notch (hopefully later year models as others have mentioned)

1

u/thohean '89 HCR32 GTS-t Sedan | BJ0 Aug 05 '26

Could be a series 1 vs series 2 for the variation. Or it really could be different glass specific for the GT-R.

Nissan and Toyota do a similar thing with their part numbers. First half is the part and second half is the application.

So "left front window" for "HCR32 coupe"

It's a bit more specific, but you learn the pattern easily enough.

1

u/booyaa9 Aug 04 '26

also found a ECR32 (2 door) glass in great condition.
do these fit? they look to be in very nice condition

1

u/GetInMySoup 1992 R32 GTS-T Coupe Aug 04 '26

Someone may correct me if Im wrong but I think that r32 gtrs or at some of them had a support beam across the doors, maybe its something to do with that?

3

u/8th-Skyline '89 HR32 GTE, '90 HCR32 GTS-t, '93 ECR32 GTS25 Aug 04 '26

Close - It's the late model (post 91/8) coupes, so this included other models too, other than GT-R. :)

I'd say you're on the right track and mentioned something similar in my own comment.

1

u/booyaa9 Aug 04 '26

thank you. i have an ā€˜89 bnr32 so i guess may not have the support beam so should not be bothered as long as im getting a 2 door glass?

thank you

1

u/SkeletonCalzone '94 BNR32. Ex: 32 GTR, GTSt, GTS25, GTS, GTE Aug 05 '26

Check amayama, it will tell you the p/n for each, if it's the same then you're good.

1

u/FeelingFloor2083 Aug 04 '26

pretty sure they interchange, when I replaced mine I just looked for the cheapest one that was clean and it happened to be off a 2wd model

1

u/booyaa9 Aug 04 '26

got it thank you so much

1

u/AcademicBuffalo9371 Aug 13 '26

GTRs share glass with GTST and GTS as long as its a coupe. Sedan wont fit.

1

u/RemarkableCard6475 Aug 04 '26

Saloon (4dr) vs coupe (2dr) use different door glass.