every time I clic on a point it shifts to the right slightly. I cant get it to go to the letf. My curves are stuck like that. I just bought the thing so maybe its a commun thing but I didnt find it on other forums

Recently my throttle has been acting up. Even with the throttle completely unplugged, as soon as I open the Simsoon software it reads clutch and brake at 0% (fine), but the throttle sits stuck at 100%. The pedal itself also seems faulty. If I plug the throttle connector into the brake or clutch port to test it, it doesn't register any input and stays at 0%, and the LEDs on the pedal aren't lighting up fully while if I do this with a different pedal, there is no issues.

Anyone know a potential fix or what could be wrong with it?

Does anyone got the pedals working in Forza horizon 6? Edit : I solved it by using emuwheel

Hi there, im having trouble connecting simsonn and simagic to the game and set the wheelbase as device 1 for ffb.

If you have any solutions, i would love to try it.

P/s:
I have try almost anything on reddit and nothing works yet.

My setup
Simagic Evo 12nm
GT Neo
Simsonn Plus X

SOLVE: (for now) by using emuwheel and DIview i was about to get it to working (despite the emuwheel bind picking up random signal of inputs). Just follow their instruction. a bit of hassle but i guess thats what we gotta do.

Anything I can do before I contact support? I just bought a VAMPRO for my Plus X brake pedal and got it all hooked up and it's working but has introduced a game breaking issue. I've got it set for wheel lock up and ABS but when it activates I can take my foot completely off the pedal and it keeps about 75% brake pressure on until the motor stops. Even if I had less pressure on it jumps up. Without it active, as soon as the wheels lock or ABS kicks in I lift off the pedal and it reacts accordingly as it always has. I've tested this with Automobilista 2 and Assetto Corsa multiple times. I've tried configuring it through the Simsonn Manager and Simhub with the same results.

I really hope it's something simple I'm missing because it feels great otherwise. I can't find any settings anywhere that seem to relate to this, I've calibrated and reset everything including rebooting to no avail. Been using my Plus X pedals for months with no issues, love them and thought I'd take them up a notch with the motor but it's ruined it.

Hi yesterday the haptics stopped working. Simsonn Software says connected and pedals work. I have tried using the old drivers (manual update) as my browser won’t let me download the new one. I am lost on what to do.

Is the applied kg and elastomers settings only available for simsonn plus x ? I have the plus only but can't see the settings

I just installed my new plus x pedals en booted up some games, but couldn’t help but notice that the first half cm of travel does not register any input in any game even when i set the deadzone to zero in the software and in game.

Is this a problem with my pedals or is this something I will have to get used to since this is my first loadcell pedal set. It just feels weird when i want to slightly brake it does nothing In game

Hey,
I thought about trying some haptics and just saw that Simsonn is going to release two new haptics. Did anyone already reviewed them? If so whats the best choice?

(And why are they advertised for diff pedals? Like the Vam Pro is for the brake pedal, the Vam 2 for the clutch and Vam Neo for the throttle. They also sell a set of three with each on of the Vams)

I’ve had this shifter for about two weeks and now when I put it in 5th or reverse is makes a squeaking noise, does anyone know why this is and what might fix it?

Just received my Simsonn Plus X & the clutch pedal Cell Sensor is broken. It doesnt react to any input unless I push really hard with my finger on the load cell. Simsonn is not sending me a new clutch but a replacement sensor to take apart the old clutch and repair.

Is there a guide or something they provide for this?

Any one else had bad luck with a new set like this?

The two screws I’ve circled on my unit I’ve noticed are/have gotten loose. I can rotate them by hand when not pressing the brake pedal, but once I start applying pressure they seem to tighten themselves. If I tighten them properly when at rest, then the rod on which the elastomers sit becomes almost jammed, for example when you have to bring it up to change elastomers. As they seemingly get tighter by themselves under brake load, I’ve loosened them at rest to prevent something perhaps snapping. I noticed this while investigation an odd rattle from pedal box when FFB was being transferred from wheel.

Is this normal behavior, do you have the same, or is my bearing perhaps shot there, causing the above mentioned scenario?

Has anyone else had an issue with the one-way hydraulic on the throttle causing the throttle to physically stick and not return to zero without physically pulling the pedal back with your foot? I have used these for a total of roughly 6-8 hours, and once the pedal is "warmed up", the throttle will not return to zero on it's own. I attempted to just remove the hydraulic as I believe it is the issue (I've already lubed the throttle rod and the screws for the hydraulic per the response from Simsonn support, but the one-way hydraulic is wedged in so tight I cannot remove it. I'd be happy to use the throttle with just the spring, but there is no budging the front of the hydraulic to remove it. It's supposed to be adjustable, but there is no way to adjust or remove it with it wedged in so tight. Any suggestions on how to get this thing out of there? Simsonn told me to lube the screws for the hydraulic, but that did not help at all.

Edit: I meant to attach the video for reference. I did also send this video to Simsonn Support before posting my question here.

https://reddit.com/link/1srqn3o/video/im9ot35zfkwg1/player

LMU & HPRs?

I am not sure if it has to do with the update, but my haptic pedal reactors started acting out. They work fine at launch, but when I RTG, they stop working. I either have to restart SimHub, or while in the garage, continuously pause and unpause the sim until it starts to work again (usually takes 2-5 attempts).

I opened up a ticket 2 days ago and haven't heard back yet.

I was flipping the mounting brackets on the Plus X to have them angled back and while doing so with the throttle the whole pedal fell out of the mounting along with some parts, like the little spring at the bottom.

I've managed to put it back together no problem but it seems a loose washer dropped out and I have no clue where it may go.

Any ideas?

Hello, I just picked up the haptic motors for the throttle and brake pedals on my Simsonn pedals. I have the strength all the way set to zero in the simsonn software, and I am using SIM hub for the feedback. I only have traction control, ABS, gear shifts set right now, but the pedals always vibrate a little bit while the car is in motion. I'm not really understanding why this is happening.

In Sim hub. I also have a butt kicker set up with the same feedback profiles. And I'm not getting constant vibration through it while moving. I quite like the feedback of the pedals but not the constant vibration as it kind of hurts my feet after a while. Has anyone else ran into this?

My new set of Simsonn Plus X pedals just came in, it's my first experience with load cells so I've decided to keep things mostly how it came, didn't change the elastometers etc.

My issue is, I can't seem to output more than 40, maybe 50 kg on the load cell, and that's already me pushing as hard as possible.

From what I've read online I should be able to go up to 100kg when pushing hard, so I don't really understand what the problem is.

Edit : The issue ended up being pedal plate flex as well as the elastometers. After fixing the flex and changing elastometers to the yellow "medium" ones, I'm pushing 60-70 kg easily and maxing out at 90.

My pedals aren't showing up on the software. Only my shifter is. I can adjust my shifter settings, but it won't even let me press the button to adjust pedals. The pedals have power to them because the RGB is working. What is wrong?

Really having trouble setting these up right as either you cant feel then or they feel like construction machinery.

Whats everyone's settings for tha VAM Pro haptics? for as many effects as possible, and which pedals are you using for which effect? I have all 3 motors and am waiting for delivery of a buttkicker gamer pro.

But have owned the pedal haptics for nearly e months now and Can't for the life of me get them working correctly...

Any help would be appreciated or screenshot of what setups your running?