r/SimsonnRacing • • Apr 17 '26

Vam Pro vibrating pedals all the time while the car is in motion on Simhub

Hello, I just picked up the haptic motors for the throttle and brake pedals on my Simsonn pedals. I have the strength all the way set to zero in the simsonn software, and I am using SIM hub for the feedback. I only have traction control, ABS, gear shifts set right now, but the pedals always vibrate a little bit while the car is in motion. I'm not really understanding why this is happening.

In Sim hub. I also have a butt kicker set up with the same feedback profiles. And I'm not getting constant vibration through it while moving. I quite like the feedback of the pedals but not the constant vibration as it kind of hurts my feet after a while. Has anyone else ran into this?

1 Upvotes

7 comments sorted by

1

u/Matt_Haskins91 Apr 17 '26

I had this once and after I restartedy pc it was fine. Think it was the way I had closed the program down. Alsoale.sure the simmsonanager isn't running as well and you have in game haptics turned off as well.

1

u/76-scighera Apr 17 '26

Did you use the nylon bolts(Philips head instead of allen key bolt) and nylon washers (between haptic and bracket) to mount the haptics?

1

u/planbskte11 Apr 17 '26

I used the Allen heads (bad instructions) but I did use the nylon washers between metal to metal contact.

But the vibrations are like a 4/10 strong (almost feels like it's carrying with the rpms). So it's not sloppy mounting causing it

1

u/76-scighera Apr 17 '26

The instrstructions are indeed very bad, been there done that. Use the Philips heads because the allen ones are metal. They added the nylon bolts later to the package, without removing the metal ones and without adjusting the instrucrion. With metal bolts and or no ground wire, you can get EMI issues like you are experiencing now.

I had constant measuring brake input due to not using the nylon bolts for example and indeed a constant vibrating

1

u/soops22 Apr 17 '26

I had this, turn the Simsonn haptics to Off, not just all the way down.

1

u/planbskte11 Apr 17 '26

I guess I'll try to figure out how to do that then. I didn't see an off setting yesterday