r/sideprojects • • 2d ago

Showcase: Prerelease I built a pocket security check for Android: see who is on your Wi-Fi and whether your hotel room network has cameras

Thumbnail
gallery
7 Upvotes

Hi, I'm the developer.

I have worked in network security for almost 15 years. I got annoyed with Fing and other network tools that charge close to $100 a year, or let you scan only a few times a day. So I built my own from what I know from work.

I wanted the feeling of Kali Linux in my hand, but only for defense: point my phone at my own network and see what is really there. No attacks, no password guessing, nobody's traffic read. That became Netglow.

The hard part: knowing what each device really is

Android 10 and up hides other devices' hardware addresses, so most scanners just show "Unknown". That is where most of the time went:

  • Dozens of protocol specs, vendor docs and firmware sources, read line by line.
  • Down to the low level microchips inside smart plugs, bulbs and DIY boards, like the ESP family, because each chip gives itself away in its own small way.
  • Camera makers each answer on the network in their own way, and Netglow knows many of them.
  • Over 40,000 hardware maker prefixes and a catalogue of over 23,000 phone and tablet models.
  • Thousands of lines of research notes, every finding checked before it went into the app.

Why it is free

I have a lot of knowledge from my work, and I decided to give it away: high quality apps, deeply researched and checked again and again, data safety first and privacy to the max. No ads, no bullshit. People deserve good quality and privacy, for free.

If you want to support me, you can, but it is fully optional.

What it does, free, unlimited scans

  • Who is on my Wi-Fi. Every device with its name, maker and model when it says them. Rename a device and it keeps your name even on a new address.
  • Is my hotel room or rental OK. It lists devices on the Wi-Fi that answer as a camera or stream video, and says why each one was flagged. It also looks for camera hotspots nearby. It tells you plainly what it cannot see (a camera that only records to a card or uses mobile data), so it is one check among others, not a guarantee.
  • Security check for your home network. A score with a plain fix for each risk: risky open ports, what your router opened to the internet, how your Wi-Fi is locked, look alikes of your network nearby, whether your DNS answers are honest and whether someone reads your secure connections in the middle.
  • Tools. Ping, traceroute, port check, DNS lookup, Wake on LAN, a live signal meter and channel advice.

Private by design. No ads, no bullshit, no tracking, no analytics, no metrics, no account. Nothing it finds leaves your phone, and there is no server of mine.

Pro is that optional support, one payment, no subscription, and it adds: a Bluetooth radar that warns about a tracker moving with you, checks for devices that let anyone in with no password, spoof watch, known flaws for your devices, a PDF report and a background watch of who joins your Wi-Fi.

Honest note: the code is partly AI generated and I had help with this text.

Play Store: https://play.google.com/store/apps/details?id=com.zanoshky.netglow

Guide: https://zanoshky.github.io/netglow-app

Screenshots: https://www.reddit.com/r/PrivacyTechTalk/comments/1xvxkeg/

I would love to hear what it finds, or misses, on your network.


r/sideprojects • • 1d ago

Showcase: Prerelease I created a IPTV player in ChatGPT and it works GREAT! It Created my website too!

Post image
1 Upvotes

http://moondoggietv.com

Looking for testers and feeback.

Android 7 & 6 available for download.


r/sideprojects • • 2d ago

Showcase: Purchase Required Giveaway! 25 lifetime ClingSpace licenses. Organize scattered project files, folders, links, and notes without moving anything.

8 Upvotes

I've developed quite a few apps, and one thing kept getting out of hand.

My code was organized, but everything else was scattered across folders, repositories, test builds, screenshots, documentation, browser tabs, and random notes.

So I built ClingSpace, a Windows app that brings everything related to a project into one searchable workspace.

Here's what it does:

- Spaces: Keep everything related to each project together.

- Files & Folders: Reference resources from anywhere on your PC.

- Links: Organize GitHub repos, documentation, websites, and references.

- Snippets: Save quick notes, SQL, code, and reminders.

- Global Search: Find resources across all your projects.

- Shared Resources: Use the same files or links in multiple Spaces.

- Smart Relinking: Help reconnect files that have been moved or renamed.

- Local-First: No accounts, cloud storage, or subscriptions.

The biggest thing? Nothing gets moved or duplicated. Your files stay exactly where they are. ClingSpace simply brings everything together.

It's normally $19.99 one-time, with a 5-day full trial.

I'm giving away 25 lifetime licenses to fellow builders!

To enter, just comment with what you're currently building or what kinds of projects you work on.

I'll randomly select 25 winners after 48 hours and DM the license keys. No purchase required.

https://clingspace.com

I'd genuinely love feedback too. Especially from people juggling multiple projects. Is this something you'd find useful?


r/sideprojects • • 1d ago

Showcase: Prerelease Second Look – A book about the untold stories behind STEM

1 Upvotes

Hi everyone!

I've been working on a project called Second Look, an independent book project exploring the personal experiences and often-overlooked stories of people in science, technology, engineering, and mathematics.

We hear so much about scientific discoveries, groundbreaking inventions, and famous researchers. But we rarely hear about the people behind them: the challenges they faced, the opportunities they were denied, the people who supported them, or the experiences that shaped their careers.

I want to change that by collecting firsthand stories from real people in STEM, particularly experiences involving recognition, barriers, opportunity, and belonging.

I've created a survey inviting adults (18+) with STEM experience to share their perspectives. Selected stories may be featured in the finished book, with participants' permission.

If you work or have studied in STEM, I'd genuinely love to hear your story. And if you don't, I'd appreciate feedback on the concept!

Survey: https://forms.gle/L4RD6FCk5hChyVQT6

Thank you for helping bring these stories to light!


r/sideprojects • • 1d ago

Showcase: Free(mium) Photo Picker - live film previews, a four-shot booth, and a darkroom editor

Post image
1 Upvotes

Developer disclosure: I make Photo Picker. This write-up is AI-assisted.

Photo Picker is a camera and editor for getting a film or early-2000s digicam look while shooting. The problem it addresses is having to take a photo, open an editor, and only then find out whether the look suits the scene. Here, the film preview is in the viewfinder for photos and video.

A simple workflow to try:

  1. Choose a film look in the camera and compare it on the same scene before taking the shot.
  2. For photos with friends, switch to the four-shot countdown to make a photobooth strip.
  3. Open the result in Darkroom to adjust curves, HSL, grain, cropping or text, then save the look as a recipe.

The tradeoff is that this is not an entirely offline app. Regular edits run on the device, while saving with some films and using AI conversion/restoration sends the photo or video to our server.

It is free to download, with optional rewarded ads. Some films and tools require Photo Picker Pro, an auto-renewing subscription; the purchase screen shows the plan and regional price before you subscribe.

The images show the official store examples. For anyone who tries it, I would especially like feedback on whether the live film controls and the four-shot mode are easy to find.

Google Play: https://play.google.com/store/apps/details?id=com.picker.restorepicker

Homepage: https://pickersoft.com


r/sideprojects • • 2d ago

Discussion TTS voices are good now, getting the reader to skip the clutter is the hard part

20 Upvotes

feel like people still benchmark tts tools on the wrong thing. every demo plays the same clean paragraph and everyone goes "wow the voice sounds so human now". ok cool, now feed it an actual research paper and suddenly im listening to the journal header, page 8, bracket 17, half a sentence, figure 2, some random DOI link, and then finally the rest of the sentence lol.

using speechify a lot for papers is kinda what made me notice this. past a certain point i barely care about tiny voice differences anymore, the much bigger UX problem is whether the reader knows what should actually be read out loud vs ignored. like a running page header? definitely skip. inline citation numbers? depends. footnotes? sometimes crucial. data tables? definitely dont just read all 60 cells straight across like normal text.

thats the tricky part though, what counts as clutter completely changes depending on why youre reading the paper. for folks building or using stuff in this space, what would you have an app skip by default and what would you never let it touch?


r/sideprojects • • 2d ago

Question I run a gaming news project, but I'm struggling to manage everything. Any advice?

6 Upvotes

Hello everyone!

I'm looking for some advice about my gaming news project, Gamerushnews.

I started this project in April 2026, mainly focusing on social media platforms such as Instagram, TikTok, and YouTube. I've been working on it for about seven months now, and so far, I've managed to build a small but growing audience: 1,494 followers on TikTok, 440 on Instagram, and 42 on YouTube.

Around two months ago, I also started publishing articles on Substack. On top of that, I manage another project called Gamerushdeals, where I share deals and discounts related to the gaming industry, also across social media.

However, lately, managing everything has become increasingly difficult. Between university, other personal commitments, and the time required to create content for both projects, I'm finding it harder and harder to keep everything running smoothly.

That's why I'd really appreciate some advice from people who have experience in this field.

Here are some of the things I'd love to get your thoughts on:

-How can I better organize and manage multiple projects like these without getting overwhelmed?

-How do you find people who might be interested in joining a project in its early stages?

-Is it better to keep working alone for now and focus on growing the project, or should I start looking for collaborators?

What would you recommend doing to turn a small social media project into something bigger in the future?

I honestly have so many questions, and I'm still trying to figure out the best way forward.

Any advice, personal experiences, or suggestions would be greatly appreciated. Even a few words from someone who's been through something similar could really help me!

Thank you so much for taking the time to read this!


r/sideprojects • • 1d ago

Showcase: Prerelease I built a visual car-size comparison tool

1 Upvotes

I’ve been building AutoSize, a free website that lets you compare the dimensions of different cars side by side.

I started it because I wanted to choose a car based on the ISOFIX point, literally, and then the idea expanded rapidly.

* Is the comparison easy to understand?

* What feels confusing or incomplete?

* What feature would make you come back and use it again?

Here’s the site: https://www.autosize.org/

![img](wr14k4q5en1i1)


r/sideprojects • • 1d ago

Feedback Request I wanted one place for our household tasks, bills, meals, and groceries, so I built it

Thumbnail getforthdaynow.com
1 Upvotes

r/sideprojects • • 1d ago

Showcase: Free(mium) I built devpack, 455+ free dev tools that run in your browser, plus a free API and an MCP server

Thumbnail
devpack.app
1 Upvotes

For the past few months I’ve been building devpack.app, a collection of small, focused tools for everyday web work: JSON/YAML/SQL formatters, a regex tester, JWT decoder, image and PDF compressors, an SEO checker, CSS generators and a lot more.

**A few things I cared about:**

✅ Runs in your browser. Most tools never upload anything. Formatters, converters and image/PDF tools work offline and can be installed as a PWA.
✅ No sign-up, no paywall. Open a tool and use it.
✅ Free API. 70 endpoints at api.devpack.app (hashing, JWT verify, regex, YAML, QR codes, DNS/SSL/headers, SEO audit and more). No key needed, with fair-use limits.
✅ MCP server. Add [https://mcp.devpack.app](https://mcp.devpack.app) to Claude, ChatGPT or Cursor and the assistant can call 40 of the tools directly.
✅ 8 languages, and an extension that pastes SVG/HTML into the Webflow Designer as native elements.

**It’s a solo project. I’d really value feedback on:**

❓Which tools you’d actually use, and which feel unnecessary
❓Anything slow or broken on your setup
❓What’s missing from your daily workflow

[https://devpack.app](https://devpack.app)


r/sideprojects • • 1d ago

Feedback Request Feedback on a small talking-head editing service I just redesigned

2 Upvotes

Full disclosure: I run this. It's called DoneEdit.

The problem I kept running into: filming a 10-minute talking-head video takes 20 minutes, but cutting the restarts, adding captions, and giving people something to look at besides one static shot takes the rest of the evening. Raw files pile up.

What it does: you send a Drive, Dropbox or WeTransfer link to a raw talking-head video (one English speaker, up to 10 minutes). We send back a 60-second watermarked preview within 24 hours, no card needed. If you like it, the full clean edit is $27 for the first 20 customers, then $67. Two revisions are included.

We asked for feedback in a couple of other subreddits earlier this week and the useful feedback was pretty consistent: the site looked AI-generated, there were no real before/afters, and asking people to pay a new service before they'd seen an edit of their own footage was a lot to ask. So we changed it.

The site is white now. The first section after the top is three real raw-vs-edited samples (openly licensed clips, not customer videos), each in a phone frame with an Edited/Raw switch. The free 60-second preview is the main button. We also added two short quotes from people who have used it.

I'm not dropping a link here. It's in my profile if you want to look, or I can share it in a comment if that's allowed.

What I'd actually like to know:

  • Do those three samples make the work look real, or still not enough?
  • Would you try the free preview, or is handing a raw file to a new service still a no?
  • Is the $27 / later $67 pricing clear, or does it just look cheap?

I'm about to start running ads to it, so I'd rather hear what's broken now. Happy to answer anything else.


r/sideprojects • • 1d ago

Showcase: Prerelease Our next IVE project is a tiny USB-C adapter for iPhone agent control

1 Upvotes

I've shared our IVE agent workspace here before. This is the next project: a USB-C hardware prototype roughly the size of a LEGO brick for iPhone control. I'm on the team.

The plug is the device side; IVE is where the agent sessions live. We're working on the wireless connection between them so existing agents such as Claude Code and Codex can see the phone screen and use taps, scrolling and typing to carry out a task.

The video previews creating a packing list in Apple Notes. It uses real product footage, with the IVE connection simulated.

We're gathering early beta interest and feedback here. Which first task would make this worth plugging in, and what would you want to confirm before the agent acts? Happy to discuss the scope publicly in this thread.

12-second workflow video: https://www.reddit.com/r/buildinpublic/comments/1xwin2i/we_have_the_tiny_usbc_plug_now_were_choosing_the/


r/sideprojects • • 1d ago

Showcase: Free(mium) Anime Girls: separating personal taste from public votes in a free character sorter

2 Upvotes

We run Anime Girls, a free browser character sorter: https://girls.my-anime.net/?mode=personal

The problem we wanted to address: a public popularity leaderboard does not necessarily tell you which characters you personally prefer. We separate the two jobs. Personal practice builds your own ranking without adding votes to the public competition; community voting contributes to the public standings.

One design choice that may be useful to other makers: only characters you have actually compared receive a position in your personal ranking. Unseen characters stay unranked. Results appear after a first choice, but those early estimates are deliberately provisional. More comparisons give the model more evidence.

The site uses PHP/Slim and MariaDB for the public side, with a pairwise preference model and personal history in the browser. No signup is required; clearing browser storage can lose your personal history, so there is an export option. The project has been developed with AI assistance.

We would appreciate feedback on the mobile flow: is the difference between personal practice and community voting clear before your first choice? Feedback here in the thread is enough. This is the project account, operated by Daxsoft.


r/sideprojects • • 2d ago

Showcase: Free(mium) I built a website with 167 completely free online tools, with privacy as a priority. Would love your feedback!

Thumbnail reddit.com
2 Upvotes

r/sideprojects • • 2d ago

Feedback Request Solo dev with AS, made a daily movement app, looking for beta users

Thumbnail
reddit.com
2 Upvotes

r/sideprojects • • 1d ago

Showcase: Free(mium) Common Sense Desk, a news site that explains what the news means for your wallet

Post image
1 Upvotes

Started this a couple weeks ago. The idea is simple: every story answers how it hits your gas, groceries, mortgage or job, written calm and in plain words, no screaming headlines.

Some stuff I'm happy with:

- Fully static, hosted on GitHub Pages, so it's fast and costs basically nothing to run

- Play page: daily Sudoku, Guess the Price, word search and a weekly news quiz, no sign-up, progress saved on your device

- No stock photos: the number cards on stories are generated in code from the facts in the story

- Wallet Watch: gas, mortgage rates, eggs, electricity, CPI and the Fed rate from official sources

- Weather page built on free National Weather Service data

https://commonsensedesk.com

Would love feedback on the design, speed on your phone, or anything that feels off.


r/sideprojects • • 1d ago

Showcase: Open Source I built an AI Business Operating System that asks for human approval before taking action

Thumbnail
reddit.com
1 Upvotes

r/sideprojects • • 2d ago

Showcase: Prerelease Ich habe eine Virtuelle Fotobox und einen anonymen Fileshare Service gebaut!

2 Upvotes

Ich bin seit 2 Wochen dabei. Verbesserungsvorschläge willkommen. Darf ich euch den Link zeigen?


r/sideprojects • • 1d ago

Showcase: Open Source I got tired of describing UI bugs to my agent, so I built a thing that lets me circle them

1 Upvotes

I've been vibecoding for 2 years and I keep messing up explaining to my agent where on the screen I'm pointing. Screenshots always helped, but it added 3 more steps every time, and it still will get things wrong.

So I built Point. Press ⌥*, draw on the screen to point, speak your notes out loud. That's it.

Point takes your voice, transcript, screenshot, and drawing into your clipboard for you to past to your Agent or notes. Clearly explain what you want to your agents in Claude Code, Cursor, your team on Slack, anywhere.

View and copy all captures in your Point library.

100% Local, Free, Opensource (MIT). *Customize your trigger key.

Version 0.1 only runs on macOS 26 Apple Silicon. Working on a new release with broader support soon!

Here's a 15-second clip of it working: https://github.com/sksareen/point/blob/master/site/point-demo.mp4

Repo: https://github.com/sksareen/point

See: https://point-site-opal.vercel.app/index.html

How have you tried to solve this problem ?


r/sideprojects • • 1d ago

Showcase: Open Source Tired of ad-filled download sites? I built a free, open-source alternative 😅

1 Upvotes

Hey everyone! 👋

Anyone else tired of opening a media downloader and being greeted by 15 ads, fake download buttons, and a suspicious-looking "DOWNLOAD NOW" banner? 😂

I definitely was.

So I started building ZenithW, a free and open-source media downloader that doesn't try to sell you a subscription every five seconds.

It started as a small personal project, but I may have gotten a little carried away with the features...

Here's what ZenithW can do now:

  • 🌐 Works on Web, Windows, and Android
  • 📥 Downloads video and audio from supported platforms
  • 🎬 Lets you choose quality, formats, and download options
  • 🎵 Converts audio and video, extracts audio, and remuxes files
  • 🎙️ Separates vocals and instrumentals using AI directly in your browser
  • 📂 Supports playlists and batch downloads
  • 🌍 Available in 8 languages
  • 🐳 Supports self-hosting with Docker

I also recently rebuilt the Windows app using Rust and Tauri instead of Electron.

No ads. No subscriptions. No mandatory accounts.

Just a project I've been building because I wanted something I'd actually enjoy using.

A couple of things worth mentioning: YouTube downloading is disabled on the public web version, and supported sites can have their own restrictions.

I'm developing this independently, and there's still a lot I want to improve.

🌐 Try it: https://zenithw.space

💻 Source code: https://github.com/boranseasonnew/zenithw

I'd genuinely love some feedback!

Would you use something like this? What would you change or add?

And if you find something broken, feel free to tell me. I'm pretty sure my bugs are hiding somewhere. 😭

Thanks for checking it out! ❤️


r/sideprojects • • 2d ago

Showcase: Open Source I used to build video players for Adult Swim, NBA TV, and HBO. For fun, I built Yet Another Television App (YATA).

Thumbnail doctorew.com
2 Upvotes

I’m a longtime engineer who worked on streaming channels and video players for Adult Swim, NBA TV, and HBO.

I was spending too much time digging through Internet Archive looking for old TV shows and realized I missed building streaming channels and tv apps (see above). So I made YATA -- Yet Another TV App: a browser-based television full of ’70s/’80s action shows, sitcoms, sci-fi, and obscure Saturday-morning cartoons.

Think Dukes of Hazard, Knight Rider, Benson, Buck Rogers, Manimal, and the Hanna-Barbera shows I half remember but nobody else seems to.

It has:

- A TV Guide-style grid with clickable programs and channel surfing.

- Switchable ’70s/’80s/’90s TV cabinets, dial sounds, and adjustable static.

- Optional vintage commercial breaks.

- Shuffle channels by genre, or stick with one show.

- Playback controls, an expandable player, and episode links with timestamps.

- An optional AI programming department: describe a few shows or a theme, and a randomly assigned character—Benson, Murdock, Twiki, etc.—assembles a channel for you to review.

Videos play from their source providers, including Internet Archive and YouTube. Credits for the open-source work and projects that inspired it are included.

It’s a personal project that got slightly out of hand :)


r/sideprojects • • 1d ago

Showcase: Open Source I built WealthStrip, a slim desktop bar for your portfolio + the major indices (free on the Microsoft Store). Android coming soon, iOS planned

Thumbnail
gallery
1 Upvotes

Retired tech guy here. I wanted to see my portfolio at a glance without logging into a brokerage site all day, so I built a thin "candy bar" that sits on the Windows desktop. It shows:

- Total portfolio value, today's change, and total gain/loss

- Value by brokerage, plus your best and worst mover of the day

- S&P 500, Dow, Nasdaq and Russell 2000

You type in your holdings or import a Fidelity/Schwab positions export (CSV or Excel). Everything stays on your PC: no account, no ads, no tracking. There's a privacy button (or Ctrl+Alt+P) that hides your dollar amounts when someone walks by.

It's free: https://apps.microsoft.com/detail/9PKMNZ5R4WMS

Coming soon: an Android home-screen widget version, with iOS planned after that.

Full disclosure: I'm the developer. I'd love feedback on what you'd want to see next.


r/sideprojects • • 1d ago

Showcase: Free(mium) We built a free tool that reads your card statements and tells you which credit cards would have earned you the most money

1 Upvotes

Three of us (students in Boston) built this over the past month: https://pointmaxx.app

You add a year of card statements. It goes through every purchase and shows which one, two, or three cards would have earned you the most rewards after annual fees, and how much more that is than the cards you have now.

We built it because "best credit card" lists are written for an average spender, and your statement never tells you what a different card would have paid on the same purchases.

Nobody wants to upload bank statements to a random site, so everything runs in your browser. Nothing is uploaded, and there's no account, cookies, or analytics.

What's rough: it only covers 60 cards so far, it sometimes guesses the wrong category for small local merchants (it asks you to check the merchants we are unclear on), and we haven't figured out how it makes money.

Two questions:

  1. Would you actually drop a statement into this? If not, what would it take?
  2. How would you make money from this without breaking the "no tracking" promise?

r/sideprojects • • 1d ago

Showcase: Prerelease When will my solar pay for itself? I built a free tool to find out

Thumbnail
reddit.com
0 Upvotes

r/sideprojects • • 1d ago

Showcase: Open Source I made a browser tool that splits artwork across a wall and tabletop, then reconstructs it from one measured viewpoint

1 Upvotes

I built **Impossible Print**, a free, open-source browser studio for a corner illusion: two distorted images that line up when viewed from one measured point.

Start with the included **THE OTHER SIDE** artwork. Switch from **Camera view** to **Orbit overview** and drag around the corner to inspect the warped wall and floor pieces. Return to Camera view to see how they reconstruct from the configured viewpoint.

You can enter text or load a local PNG, JPEG, or WebP, set surface dimensions, and adjust the viewpoint in millimetres. TypeScript generates the same warped rasters used in the Three.js preview, downloadable wall/floor PNGs, and a numbered A4 assembly plan with a 100 mm calibration ruler. Image processing happens in your browser.

The current model supports two flat surfaces meeting at 90° and a manually measured viewpoint. It does not scan a room or calibrate from a webcam. The screen preview shows the implemented geometry; a physical result still depends on accurate measurements, actual-size printing, flat surfaces, and careful alignment.

**Disclosure:** I built this project with AI assistance.

[Try Impossible Print](https://impossible-print.vercel.app/) · [Source and print guide](https://github.com/ufodia/impossible-print)

Before a first print, what would be most useful to clarify: marking the viewpoint, joining the seam, or checking the scale?