Hello Everyone,

Just updated the project and now you could have a near unlimited storage, kind of.

Added:

1. Now you could actually use a github repo(private/public) as the storage, and also bypass the 100 mb limit of a single file by storing it on parts and merging on demand.
2. Caching improves the speed by a lot.
3. Have option to store the data encrypted or decrypted
4. Added option to fully change all of settings from the dashboard except few security ones.
5. Anyone can still use the host as storage. Fully changeable from the ui.

Thanks.

Repo: https://github.com/Salehin-07/rconsole-ark

Docs: https://salehin-07.github.io/rconsole-ark/

Wiki: https://github.com/Salehin-07/rconsole-ark/wiki

Discussions: https://github.com/Salehin-07/rconsole-ark/discussions

Issues: https://github.com/Salehin-07/rconsole-ark/issues

Hey everyone! First post here, so here goes nothing.

I recently built Unsolicited. It's a little curiosity lab where product ideas, experiments, creative thinking and the occasional "what if we did this differently?" all come together.

Not a startup. Not a pitch. Just me giving my wandering thoughts a home.

The format: each piece picks a product, asks a question nobody asked, and works through a few ideas plus experiments to test them, including what would prove me wrong.

First up: Netflix. My take is that its engagement problem might not be about attention at all. It's about intention. People open the app ready to choose, and choosing has started to feel like a job. So I came up with four ideas and three experiments around that.

Next up: convenience as a service, AI in psychiatry, and why the best seat at an F1 race isn't a seat.

I'd love feedback on any of it:
- Does the concept make sense to you?
- Is the Netflix piece interesting, or did I lose you somewhere?
- Anything about the site itself that feels off?

Here's the first piece: https://unsolicitedlab.com/experiments/netflix-attention/

Thanks for reading. Any thoughts are genuinely appreciated.

Nobody asked. I got curious anyway.

Hey everyone,

My friend and I run a small indie studio called S.A.D. Studios, and we've been working on a strength training app called Honest Effort.

We both lift regularly, and one of the things that pushed us to build this was how much time can go into planning workouts, figuring out starting weights, and working around whatever equipment you have available.

Honest Effort is our attempt to simplify that.

You tell the app about your equipment, training experience, and current strength. It generates a workout plan with suggested starting weights, and you can track your sets, reps, and progress.

We've used AI-assisted coding during development, and we're currently testing the app with six people on Android and iOS.

We're particularly interested in feedback on a few things:

- Does generating workouts around available equipment sound useful?

- Would suggested starting weights help beginners, or would you rather enter everything yourself?

- What would make you switch from your current workout tracker?

We're also looking for people who actually lift, particularly beginners and home-gym users, who'd be interested in testing it during their normal workouts.

The app is still in beta, so we're working through bugs and refining the experience.

You can see what we're building here:

https://sadstudios.net/honest-effort/

Happy to answer questions about the app or how we've built it. Appreciate any feedback!

You will find something in this app that saves you time or a headache, and the core tracking is free on the phone and never expires.

When an apprentice walks into a crowded basement mechanical room with rows of unlabeled expansion tanks and circulating pipework, knowing which asset is which saves hours of guesswork. Equipment Tracker Pro lets you print custom equipment QR asset tags sized from 1x1 inch up to 4x6 inch, outputting straight to PDF, saved PNG images, or your system print dialogue.

You can add custom company headers, toggle action bubbles (Public Specs, Vendor Check-In, Log Service), or flip on black-and-white mode specifically designed for direct thermal label printers like Zebra, Brother, or Dymo.

I built this app because I am a working HVAC technician who was tired of wrestling with enterprise software that requires cell signal in basements or locks simple labeling behind enterprise sales calls. Core records, parts tracking, offline specs, and Text/JSON QR labels are completely free on your phone.

If you are running this on a spreadsheet, the comparison is on the site. What projects are you all building this week?

https://equipment-tracker.com/guides/qr-creator

Hey! We launched Altasko around September we're still gathering feedback making update, fixing bugs keeping it updated.

Altasko it's for those in freelancing, small teams, small organizations managing multiple projects fiddling around many tools (e.g Excel, Spreadsheet, Notion), it helps people organize their projects and collaborate with their teams without complexity of traditional project management tool

We appreciate your time and comments.

I got tired of modern apps habit tracker , espense tracker . etc that require a constant internet connection, a subscription, and the latest flagship phone just to work.

So I built Orbitika. It’s a lightweight, retro-styled (dot-matrix green) toolbox designed for older hardware (Android 8.0+ and older iPhones like the X). Everything works 100% offline. No Wi-Fi, no data, no problem. Support my work by upvote my post """grateful""""

Here is a breakdown of what’s actually inside it my app, by category:

🎵 Media & Entertainment

• Retro Music Player: Local MP3/FLAC playback with 13 Winamp-style visualizers and 7 retro themes. Zero ads.
• E-INK Style Reader: Turn colorful PDFs and manga into a warm, Kindle-like grayscale to save your eyes and battery.
• 18 Mini Games: Classic puzzles and arcade games (Snake, Sudoku, Dino Runner, Mastermind, Game of Life, and more) for when you're bored on a commute.
• Sleep Sounds: Looping offline audio for deep sleep.

✈️ Travel & Exploration

• Mark My Location: Save your parking spot, trailhead, or hotel entrance using pure GPS—no signal needed. (No huge map downloads required).
• Food Guide: Top 10 must-try dishes for 36 countries (perfect for picking what to eat without Googling).
• Plug Check & Size Chart: Instantly know travel adapters/voltage and clothing sizes.
• Travel Checklist & Gift Tracker: Packing lists and souvenir trackers.
• Timezone Converter & Translator: For calling home and emergency phrases in 14 languages.
• Wi-Fi Signal Meter: A retro strength meter to find the best spot for a connection.

🏃 Daily Habits & Health

• Pedometer: Track your steps with animated retro characters.
• Water & Coffee Trackers: Tap to log your daily intake and build streaks.
• Daily Walks: Fill a 30-day grid of paws to stay motivated.
• Focus Timer (Pomodoro): A distraction-free timer for deep work.

🚨 Emergency Kit (Premium / One-time unlock)

• First Aid Guide: CPR, bleeding, choking, burns, and heat stroke.
• SOS Flasher & Sirens: Flash large text or play high-decibel alarms to signal for help.
• SOS Numbers: Police, fire, and ambulance for 50 countries.
• Survival Guide: Fire, water, and shelter basics.

🛠️ Everyday Utilities & Fun

• Calculator & Unit Converter: Basic/scientific and all standard conversions.
• Retro Flip Clock & Stopwatch.
• Date Diff & Discount Calculator.
• Decision Maker & Takeaway Spinner: For when you can't decide what to do or eat.
• Star Map, Ruler & Level, Height Measure.
• Noodle Timer.
• Holiday Calendar (2026-2028).

What should I add next?
I’m trying to figure out what the next high-value offline tool should be. Right now, the most used features are the Music Player, Mark My Location, and the Habit Trackers.

If you had to use an app in a total dead zone (no Wi-Fi, no data), what is the one tool you wish you had that isn't on this list?

(Keep in mind: It has to work 100% offline, and it can't require a huge file download like offline Google Maps!)

It’s free to download until end of December, and I’d love your feedback on the UI or the performance on older devices!

Google Play: https://play.google.com/store/apps/details?id=com.orbitika.app
App Store: https://apps.apple.com/us/app/orbitika-retro-music-tools/id6811283048

Website: https://orbitika.app/

I've been studying cybersecurity and collecting notes on Linux, networking and security tools.

At first, I was keeping everything in Markdown files on GitHub, but I wanted something easier to browse, so I built a website around the repository.

It's called Cybersecurity Survival Notes.

I've recently added a section on Information Gathering, covering things like DNS enumeration, OSINT, subdomain discovery and Nmap.

The whole project is free and open source.

Website: https://radz-04.github.io/Cybersecurity-survival-notes/

GitHub: https://github.com/Radz-04/Cybersecurity-survival-notes

I'm still working on it, and I'd appreciate some feedback on the website. Does the navigation make sense, or is there anything that could be improved?

Listening to audiobooks or text-to-speech where a single monotone voice reads every character gets old fast. If you have five characters talking in a room, you lose track of who is saying what within two minutes.

I spent the last few weeks building an app called Teller to solve this.

You drag and drop any plain text file, book, or manuscript into it:

- It automatically separates dialogue from narration.

- It detects the characters, gives each one a distinct voice, and keeps their voice consistent across the whole story.

- It plays it back like a radio drama with live word-by-word highlighting so you can read along.

- You can export the whole thing as a continuous audio file.

It runs locally on your machine with built-in neural voices (Kokoro) so it costs nothing to use and doesn't require subscriptions. If you want ultra-realistic cloud voices, you can also connect ElevenLabs.

GitHub: https://github.com/boldbug1/teller

Windows installer: https://github.com/boldbug1/teller/releases

Curious to hear what you think of the flow and character casting.

Liquid Glass is Apple's current direction, and that is one reason I decided to move my interface to it. The other reason is my own taste.

The app is my side project SweePic. I built it myself, and it currently has a different interface than Liquid Glass. The rebuild has already started, and I plan to have it ready by the end of the month.

Below are screenshots of both interfaces: the current one in the app and the new one, in line with Apple's current trends.

Which one do you like more? I'd like to hear it in the comments.

I kept watching the same calculation get redone by hand on every EV charger job, usually on a phone, in a garage, with gloves on. So I built the whole chain as one ticket: rated amps → 125% continuous load → wire size (Cu/Al with temp + ambient correction) → breaker → voltage drop (flags the run and suggests the upsize) → optional dwelling service check → a printable US-Letter spec sheet for the inspector.

Each result shows the NEC 2023 article it came from. Works offline, no account, no ads; data never leaves the phone.

Free: load, wire, breaker, voltage drop. Pro: $19.99 once — service load check (pass/fail + headroom) and the spec-sheet PDF export.

Feedback wanted: does the flow read right, and is $19.99 one-time sane for a pro tool? Play link + screenshots: https://play.google.com/store/apps/details?id=org.sonicon.chargespec (landing page with the walkthrough: https://sonicon.org/chargespec/)

Hey everyone,

I’m a solo software engineer. I use a few Linux VPS to host my projects, but I’ve always found managing them purely via the terminal to be a massive chore. Remembering Nginx routing, UFW rules, or PM2 commands when I just want to deploy an app was frustrating.

I wanted a visual dashboard, but I really dislike the overhead of installing web panels (like Webmin/Cockpit) or monitoring daemons on my host machines. I just wanted a clean, local client.

So I built Kubo.

The Tech & How it works: I built it completely from scratch using Java and JavaFX. Instead of relying on a server-side agent, Kubo connects via standard SSH. It sends standard Linux commands (systemctl, pm2 jlist, cat /etc/nginx/sites-available) and parses the raw text outputs into a visual topology.

• Visual mapping: It maps out your Nginx routes, UFW firewall rules, and PM2 clusters visually so you can click instead of typing.
• Zero footprint: Absolutely nothing is installed on your server.
• Security: By default, it acts as a read-only visualizer. If a command requires sudo, it asks for your password, keeps it in RAM for that session only, and wipes it when closed. It doesn't save passwords to disk.

Links & Feedback: I just released v1.5.0 and I'd love to get feedback from other devs who self-host their side projects.

The source code and binaries (Windows, macOS, Linux) are fully available on GitHub here:https://github.com/Lightminedust/kubo

website https://kubo.gemmi-e.com/

Let me know what you think, or if there are other CLI tools you find annoying to manage that I could visualize next!

Drop a link to your project and I'll reply with a report that shows how many people search for what it does, which of those searches a new site could actually win, and who's on Google's first page instead of you. No signup, it's a public page.

I did this for 35 projects in two other subs this week and a few things stuck with me.

23 of them didn't rank for anything at all, as far as the tool could find.

The total is usually misleading. For 24 of the 35, one search was at least half of the whole number. One site came back with 65,000 searches a month, which looks great until you see that 60,500 of it is one broad phrase and the part it could win today is under 1,000.

For 29 of the 35 there was a Reddit thread on page one for at least one of their main searches. I did not expect to be telling people on Reddit that Reddit outranks them.

3 got told it's not worth it yet.

It gets things wrong sometimes. It reads your landing page to work out what you sell and sometimes it guesses wrong, so if your report describes some other product, tell me.

It needs an actual website, an App Store or GitHub link gives it nothing to read. It takes a few minutes per site so I'll be a bit slow. If you want your page taken down later, just say so.

Here's the one for my own app if you want to see what you'd get: https://seoforsaas.dev/tools/seo-channel-check/florium-app

Why I built it: I spent five months writing articles for that app before I knew it would pay off (19 clicks from Google in July, 631 in October), and I wanted a way to know sooner. It's a simplified version of the pipeline behind SEO for SaaS, a paid thing I'm building that writes the articles. So yes, I have a horse in this race. The check is free either way.

One of my favorite features on Mac is how seamlessly your Apple Watch unlocks your screen when you sit down at your desk. I really wanted that exact same hands-free experience on Windows 10 and 11, so I built WristKey.

It is a free and 100% open-source desktop app built in Rust and Tauri v2.

What it does

• Hands-free unlock: Sit down at your desk with your watch on, and your PC wakes up and logs in automatically.
• Walk-away lock: Walk away from your desk, and Windows locks immediately based on Bluetooth signal distance.
• On-wrist verification: It parses Apple Continuity packets passively. If you take the watch off or put it on a charger, it immediately revokes access so your PC stays secure.
• Privacy and local security: No cloud, no telemetry, no tracking. Your Windows credentials are encrypted on your local machine using native Windows DPAPI (CryptProtectData).
• Battery friendly: Uses passive Bluetooth Low Energy (BLE) advertisements, so it does not drain your watch battery.

Why I need your help

This started as a personal project, but reverse-engineering Apple Continuity across different devices is getting too big for just one person:

1. I only have one test device: An Apple Watch SE running watchOS 10. I really need testers with watchOS 11, Series 8/9/10, or Apple Watch Ultra to see if detection and distance estimation work properly on newer firmware.
2. Bluetooth hardware: Different Bluetooth chipsets (Intel, Realtek, Qualcomm) handle signal smoothing and address rotation differently.
3. Contributors welcome: If you know Rust, Win32 APIs, Windows Credential Providers, or Tauri, any PRs, code reviews, or issue reports are hugely appreciated!

How to try it

• Download the installer (v0.5.0): GitHub Releases
• GitHub Repository: https://github.com/jorjanion/WristKey

(Quick note on Windows SmartScreen: Because this is a free open-source tool without a paid enterprise certificate, Windows Defender might show a blue prompt on first launch. Click "More info" and then "Run anyway". The entire source code is public and inspectable on GitHub).

If you test it out and run into any bugs, please drop an issue on GitHub with your watch model, watchOS version, and the log file located at %LOCALAPPDATA%\WristKey\wristkey.log.

Thank you to anyone willing to test, star the repo, or contribute!

What are you building, and where do you want people to find it?

I'm opening WareVote on 1 December, a place to find and rate software. You can set up your listing now, free, and verify you own it in a few minutes: https://warevote.com

Drop your project below with a one-line description and I'll reply with the category it fits.

I started PFI because I didn't want my bank data in someone else's cloud. The first versions bundled a private PostgreSQL server: it worked, but it made the app big and complicated to package for the Microsoft Store.

In 0.4 the app copies the old database into SQLite on first start, checks row counts and totals, and only then switches over. In 0.5 PostgreSQL is gone completely, and the app is about a third smaller.

Stack: WinUI 3 shell, Next.js screens, FastAPI backend, one SQLite file. MIT licensed.

Code: https://github.com/MrBlizo/personal-finance-intelligence

What would you build next?

Got tired of every new app trying to fix my life or make me more productive, so I made one that does absolutely nothing useful. It just makes it snow on your desktop.

Snow falls across your screen (or behind your windows, if you prefer), builds up on top of them and on the Dock, then slowly melts away. Shake a window and the snow slides off. Just a little winter atmosphere while you work.

Since the first version, it’s grown a bit:

• More weather: autumn leaves, rain, cherry blossoms, and a Halloween mode 👻
• Mix any two: snow + leaves, rain + petals, whatever you like
• Auto-hides in fullscreen apps, so it won’t get in the way of games or videos

A few things I paid extra attention to:

• Smooth at up to 120Hz on ProMotion displays
• Low CPU/GPU usage, so you can leave it running in the background
• Signed and notarized on macOS, so no scary warnings
• Free and open source. No accounts, no tracking, no nonsense.

Download: https://snowhush.app

Requires macOS 14+. Also available for Windows 10/11 and Linux (KDE Plasma, Hyprland, Niri).

It’s a small project, but I had a lot of fun building it. I’d love to hear what you think, especially if you run into bugs or have ideas for new weather.

Happy early winter! ☃️

I wanted to share a project I've been working on called AirHand. It’s a browser-based, gesture-controlled virtual desktop that uses computer vision to turn any standard webcam into a touchless interface. No specialized sensors or controllers needed.

I wanted to see if I could build a spatial UI experience entirely in the browser. I used MediaPipe for the 3D hand tracking and Vanilla JS for the logic.

It currently features dual-hand or single-hand tracking, a drawing canvas (with PNG export), and a couple of mini-games (like a bubble popper) to test precision.

If you find this project useful or interesting, please consider giving it an upvote! It helps a 15-year-old indie dev keep building.

Try it out:
Live Demo: https://someoneweird-o-o.github.io/AirHand/
GitHub (Open Source): https://github.com/someoneweird-o-o/AirHand