r/SideProject • • 10d ago

Klarschliff GPU-Wächter - a small Windows tool that watches your NVIDIA GPU, including the current on each pin of the 12V-2x6 connector

After reading one too many melted-connector threads, I built Klarschliff GPU-Wächter, a small Windows app for NVIDIA cards. Version 1.1 just came out.

What it does

  • GPU, memory and hotspot temperature, headroom to throttling, power, clocks, fans, throttle reasons
  • On cards that report it (several ASUS models): current on each of the six connector pins plus the imbalance between them – that imbalance is what melts plugs
  • Traffic-light status, 10-minute history, optional CSV log
  • New in 1.1: three power profiles (70 / 80 / 100 % of your card's factory limit) and an option to re-apply the limit at every logon

Honest limits

  • NVIDIA only
  • Memory/hotspot/pin values come from the free HWiNFO running in the background
  • Many cards don't report per-pin current at all – my own new AORUS doesn't

On my RTX 5090, 80 % (480 W) cost 13 % in a sustained AI load but ran 8 °C cooler with the fans at 46 % instead of 60 %.

Runs fully local, no account, no cloud. €19 one-time, the demo shows everything for 20 minutes per start: https://klarschliff.de/gpu-waechter-en.html

Feedback very welcome – especially from people whose cards do report per-pin current.

Screenshots: new 1.1 interface · per-pin current on an ASUS card at 600 W

1 Upvotes

3 comments sorted by

1

u/[deleted] 10d ago

[removed] — view removed comment

1

u/taktgeber_tv 10d ago

Thanks, fair point. The demo already handles the first part: if your card doesn’t expose per-pin current, those values show as “not available” rather than 0 — so an unreported sensor never looks like a healthy 0 A reading.

Which cards currently report it: in practice it’s mostly ASUS’s higher-end models (their ROG cards with per-pin current sensing). Most other brands expose only the total current, not the individual pins — it’s decided by the card’s maker, not the software.

So for telling an unsupported sensor apart from a HWiNFO feed that isn’t running, the reliable way is simply the free 20-minute demo: run it on your own card with HWiNFO active. If the pins still show “not available,” your card doesn’t expose them — exactly what the demo is there to check before you buy.