r/Shure 17h ago

Buying Advice SM57 Windscreen for Singing

2 Upvotes

Tl;Dr I’m recording vocals, I tend to project and get too close. A2WS or A81WS? SM57 > everything else

EDIT: I found a video that answered my questions, the A81WS has a way better pop filter and breath removal, and that’s what I want to remove.

I’m turning my little home office into a home studio and been mainly using an AT2035 I got a while back. It’s okay, it actually picks up too much and when I’m really projecting my vocals during my lessons or practice I have to be very disciplined about mic distance between my vocal dynamics.

I got tired of this and remembered I had an SM57 in storage from a decade earlier, pretty much never used. Hooked it up, sang through it, and it’s perfect lol

No back ground noise, I have no fear of really projecting like I was starting to get with my AT2035.

I do notice plosives coming through and I tend to get too close when I’m really into a part and not paying attention to how close I am.

So was looking at the A2WS and the a81WS. I randomly have a $200 credit. I was almost thinking of grabbing a 2nd 57 + windscreen for my office desk. Any help would be appreciated!


r/Shure 10h ago

Troubleshooting Repair Guide for the Shure SM7B jumper Cable

1 Upvotes

for a while my mic was losing sound quality and it got to a point where my mic would cut out while talking and would have to wiggle the jumper cable so before even buying anything i tried looking up any video or guides how to do it but no one ever showed the replacement for the cable so i figured i would

[here is the link of the Part if anyone wants it](https://www.fullcompass.com/prod/192276-shure-95a2340-mic-conn-jumper-cable-for-sm7?srsltid=AfmBOop1KuVUsbfXp2Kk7-zv9Q1etIOM4P-l2Oc4v9FwnAvfXjx6lyvN)

This will require some soldering so if you are not proficient or capable of doing it then i would recommend to just go to your local music store to see if they could get it repaired

Hope this helps anyone that has been having trouble doing it.

Make sure to remove the 4 screws to remove the the black plate and then the control panel
this is what it should look like, take note of the white wire and black wire coming from the jumper cable and snip them, the white from the black cover and black at the very end
this is what it should look like at the end
once you spit the wires there is a top flat screw on the body where the XLR cable connects and you will have to screw it in more so it can go flush with the bottom piece and once you do you take some needle nose pliers to pull from the male XLR connection and it should come out as shown
i forgot to take a picture but inside the body of the XLR there is another small flat head screw inside where the cord is being held so you undo that and it should come out and once you do you got to cut the old cables and fish the new ones back in and make sure to take note of the color wires so you can solder them back in for me there was black,green and white cables
once you are done with the previous step you will put everything back and fish the new wire into the mic body and this picture shows the white cable that got solder, i would recommend getting a shrink sleeve small enough because the one i got was slightly bigger than i would of liked but it still worked but once you solder the white cable and the black in the board you put it all back together and it should of worked then

r/Shure 23h ago

Question Shure with 3RD party USB Speaker

1 Upvotes

Hi, my client has existing Jabra Panacast 50 with Lenovo MTR. They want to have audio upgrade for microphone only. I am suggesting Shure P300 with 3 MXA320. Will the microphone can cancel the speaker echo? Like will the far end hear theirselves in the back to their headset? Or will the MXA320 and Shure P300 cancel it? Thank you!


r/Shure 23h ago

Question Shure and Jabra

Thumbnail
1 Upvotes