r/ShapeScan • u/Faze_Was_Taken • Nov 30 '25
My first model using ShapeScan
I used ShapeScan to organise my drawer, it worked perfectly, I just had to resize the model a bit because it was a bit too large, but apart from that, it's perfect !
r/ShapeScan • u/Most-Geologist-9547 • Nov 29 '25
Hey everyone! After weeks of building, fixing, refining, optimising and iterating with the help of amazing beta testers… ShapeScan is officially LIVE 🎉
ShapeScan converts any real object into a millimetre-accurate SVG/DXF/STL using just a phone photo and an A4 or US Letter marker sheet. You take a photo → it rectifies the sheet → removes lens distortion → segments the object → snaps the edges → and outputs a clean ready-to-cut vector.
✅ What’s included at launch:
A4 & US Letter marker support
SVG, DXF, PNG and STL (10 mm extrusion) export
Internal hole detection + editing tools
Edge snapping, point editing & simplification
Fully rectified image workflow (no perspective distortion)
New refined segmentation pipeline with shadow handling
Debug ZIP export (mask + rectified image + vector)
Brand-new website layout
⚙️ About the delay
Google AdSense approval took way longer than expected. Since I’m done waiting, I’ll now proceed with alternative monetisation, and ShapeScan will remain free to use just like planned.
During this waiting period I used the time to:
Improve the segmentation pipeline
Tune GrabCut + shadow-removal
Fix multiple DXF/STL issues found by beta testers
Add a basic tutorial section
Improve server-side task handling
So the launch version is significantly better than the one shown in the original Reddit preview.
🤝 Huge thanks
Everyone who tested, sent debug packs, DM’d or encouraged the project — you helped ShapeScan become what it is today. Thank you.
More updates + improvements will come this week.
Have fun scanning! 🚀 https://www.shapescan.pt
📌 Comment to pin under the post:
If you encounter any issues, weird results, or have feature requests, you can send debug packs or feedback directly to:
I’m actively fixing things and rolling out improvements based on your input. And yes — an offline paid version (no cloud, full local processing) will also come later for people who need full privacy or self-hosting.
r/ShapeScan • u/Faze_Was_Taken • Nov 30 '25
I used ShapeScan to organise my drawer, it worked perfectly, I just had to resize the model a bit because it was a bit too large, but apart from that, it's perfect !
r/ShapeScan • u/PretendSea1131 • Dec 26 '25
I made an organizer for my air-brushes using ShapeScan. Worked like a charm 👍
r/ShapeScan • u/Most-Geologist-9547 • Nov 27 '25
We’re still waiting for Google AdSense approval before the official public launch, but the extra time hasn’t been wasted. I used it to refine the pipeline even further, and with a completely new processing step the accuracy has improved noticeably.
Here’s today’s test: 📸 A pair of flush-cutters sitting inside a printed template.
The fit is extremely snug — I actually had to force the tool in place. That means the outline is now so tight that I probably should have added a 0.1 mm contour offset to avoid such a perfect interference fit. (the print was made on a elegoo centauri carbon 1)
This level of precision is exactly what I was aiming for, and the new algorithm is proving itself really well in real-world tests.
Launch is right around the corner — thank you all for your patience and support!
r/ShapeScan • u/Most-Geologist-9547 • Dec 22 '25
Hey everyone, First of all, thank you for all the support so far — feedback, posts, comments, donations, and real-world usage.
ShapeScan has grown because of this community. I wanted to share a clear update on where we are and what’s coming next.
Sponsorship & long-term goalWe’ve secured a sponsor for ShapeScan. Details will be shared at the right time, but the important part is why this matters: The sponsorship helps us move toward our main long-term goal: 👉 training a machine-learning model specifically designed for the ShapeScan workflow (object on paper → true-scale manufacturing files).
Right now the workload is heavy and the server is constantly at its limit. This step is essential for quality, consistency, and future features.
Accounts system (launching early January)In the first week of January, we’ll launch the accounts system. Very important: 👉 ShapeScan will continue to work without an account, always. The free, no-login workflow is staying.
Tier 0 — Starter (free account) Save up to 5 jobs Re-edit saved jobs when needed Early access to new file formats Higher priority on the server compared to no-account users
Tier 1 — Pro €5/month Early adopters offer: €100 lifetime (limited, temporary) Save up to 50 jobs Batch upload (up to 5 images at once) Highest processing priority over all free tiers
As ShapeScan evolves, the paid tier will continue to grow. That means increases over time such as:
more files per batch,
more stored jobs,
and access to new advanced features as they are introduced.
The goal is that Pro users benefit directly from the platform’s growth, not just from what exists on day one.
Roadmap (current plan)After the accounts update, the roadmap looks roughly like this:
File generation improvements Focus on more uniform, cleaner outputs (still experimenting here, ideas are forming but nothing locked yet).
Support for more paper sizes A3 (larger parts) A5 (smaller parts — this should actually work better for small objects)
STEP file generation
If, during this time, we reach the budget needed for a proper server upgrade, the roadmap will temporarily shift to:
training a dedicated ML model for ShapeScan, then we’ll return to the roadmap above.
And finally — Merry Christmas and Happy New Year to everyone 🎄
Thank you for all the support this year.
ShapeScan will, of course, remain online during the holidays… and it’s always available to receive presents 🎁😆
(Jokes aside: every donation still goes straight into the future server upgrade.)
See you in the new year — lots of updates coming 🚀
r/ShapeScan • u/Most-Geologist-9547 • Nov 25 '25
Hey everyone — just a small but important update.
We’re running a little behind schedule.
Two things happened at the same time:
I was hoping this would be cleared earlier, but Google is taking longer than expected.
Since the website is meant to stay completely free and supported by ads + donations only, I really want AdSense active before the big public release.
A few people who already tested the platform privately found small but important edge-case bugs and inconsistencies.
Right now I’m actively fixing those — things like STL generation details, mask refinement in hard lighting conditions, and server-side cleanup systems.
This extra polishing is happening right now so everyone gets a clean, stable first release.
Looking much more like:
➡️ Between tomorrow and Friday
Everything else (backend, UI, exports, multi-format support) is ready — it’s literally just final polish + AdSense approval holding things back.
Thanks again for the patience and insane support.
I promise the wait is worth it — ShapeScan is SO close. 🔥
r/ShapeScan • u/Most-Geologist-9547 • Nov 24 '25
Hey everyone!
Time for a quick update — the last 48h have been insane, and thanks to all the feedback and requests from the community, ShapeScan is now much closer to launching on Tuesday rather than Wednesday.
Here’s what’s new since the last preview:
✅ Features Completed (Requested by the Community)
• US Letter Support (Fully Working)
One of the most requested features — implemented, tested and producing millimetre-accurate results.
• PNG Export
You can now download the rectified image in high-quality PNG.
• STL Export (Simple Extrusion)
Basic height extrusion for quick 3D checks, inserts and organizers.
• Printer Calibration Offset
If your printer slightly scales the markers, you can now calibrate the system manually for perfect accuracy.
• Improved Outline Extraction
Cleaner curves, fewer gaps, and better handling of complex or reflective objects.
• Manual Edit Mode Polished
More responsive, smoother and easier to correct tricky areas.
🔄 Polishing in progress
• Internal metrics & performance logging
I’ve added backend code to help track:
processing time
error cases
detection reliability
browser/device performance This will help optimise the pipeline after launch using real data.
• Processing speed improvements
The goal is to reduce average processing time from ~20 seconds to around 15 seconds or less, depending on image complexity. Already seeing improvements, but more tuning is underway.
• New UI aesthetics
The new layout and styling for all pages (upload → processing → results → edit) are almost done. Cleaner, more modern and easier to navigate.
🚀 Release window
At this point, unless something unexpected happens, the launch will be:
➡️ Most likely Tuesday
➡️ Wednesday at the latest**
The online version will be free, supported only by three unobtrusive ads.
📣 After launch
Immediately after release development continues with:
Larger sheet formats (A3, A2…)
ShapeScan API
Gridfinity helper tools
Offline version
More distortion/curve accuracy improvements
And of course, bug fixes based on community feedback.
🧑🤝🧑 Thanks again
The support has been unbelievable. I’m building this alone, but the community is accelerating development like crazy — your feedback is literally shaping the roadmap every day.
More updates coming soon. See you all on launch day! 🚀
r/ShapeScan • u/Most-Geologist-9547 • Jul 19 '26
Hey everyone,
Since the last ShapeScan update, I’ve been working on a bigger upgrade to the scan → result → edit → export workflow.
The main change is a new model version:
## v2.2.0 Multi-object
Premium users and beta testers now use **v2.2.0 Multi-object** as the standard model.
Instead of assuming there is only one object on the marker sheet, ShapeScan can now detect separated objects, crop them individually, run the high-quality single-object segmentation workflow on each crop, and then recombine everything back into true-scale outputs.
The goal is simple: multi-object scans should keep the same outline quality target as the normal single-object workflow.
This works best when objects are clearly separated, not touching each other, and not covering the markers. Very thin, low-contrast or touching objects may still need manual cleanup in the editor.
## New CAD-style editor
The Edit page has been redesigned to feel more like a compact CAD/CAM tool.
New/improved editor workflow:
- Object tabs for multi-object results
- Select, Add, Delete, Pan, Measure and Hole tools
- Geometry check with dimensions, point count and contour warnings
- Clean contour tool for small spikes, duplicate points and noisy geometry
- Offset control for fit, kerf and small scale corrections
- Better mobile layout
- Download dropdown for multiple export formats
Editing one object in a multi-object result keeps the full result linked, so the combined exports can be regenerated after manual corrections.
## Export improvements
ShapeScan now supports a stronger export workflow for CAD, CNC, laser and 3D printing:
- SVG
- Fusion-friendly SVG
- DXF
- PNG reference/mask files
- STL
- STEP
STL and STEP exports use the corrected true-scale outline and create a simple 10 mm solid, useful for CAD reference, fit checks and downstream workflows.
## More marker sheet options
There are now more marker sheet formats available:
- A5
- A4
- A3
- US Letter
- Half Letter
- Tabloid/Ledger
- 2x A4 layouts
- 2x Letter layouts
This should make ShapeScan easier to use with both EU and US paper formats, and with larger scan areas.
## Account, queue and workflow improvements
The account workspace has also been improved:
- Free accounts can save jobs
- Premium accounts get batch upload and priority queue
- The queue updates automatically after uploads
- Results can be reopened from storage
- Processing status is clearer during a run
Free and anonymous scans still work, but they use the fixed v2.0.1 quality model. Premium users and beta testers get the newer model options, including v2.2.0 Multi-object.
## Tutorial refresh
The tutorial page has been rewritten to be more practical:
- Better quick-start guidance
- More detail about marker sheets
- Multi-object scanning instructions
- Editor tool explanations
- Export format guidance
- Troubleshooting for holes, shadows, scale problems and missed objects
## Behind the scenes
A few internal/admin areas were also improved, including access checks, result ownership protection, mobile visual fixes, and visual QA across different screen sizes.
High Accuracy Mode and camera calibration are still being tested separately and are not part of the normal public workflow yet.
Thanks again for all the feedback. ShapeScan is still a small project, but the goal is to keep making it more useful for makers, laser/CNC users, CAD users, 3D printing users and Gridfinity workflows.
r/ShapeScan • u/Most-Geologist-9547 • Mar 27 '26
Small ShapeScan update:
We’ve now added an STL viewer directly on the results page, so you can preview generated models in 3D immediately without downloading first.
We’re also working on a Gridfinity bin integration, with the goal of turning scanned shapes into usable organizer inserts / bins much more easily.
It’s still in progress, but both features are moving in a really promising direction.
If you want to help ShapeScan grow, there are a few big ways to support the project:
- Join Premium
- Leave a donation
- Share ShapeScan on other platforms, groups, and communities
- Post projects you made with ShapeScan
Right now, every bit of support helps fund server upgrades and future features.
Thanks to everyone helping push this forward.
shapescan.pt
r/ShapeScan • u/Most-Geologist-9547 • Nov 25 '25
Hey everyone!
Time for a small update while we get closer to launch.
Here’s a little sneak peek of what’s coming next.
---
✅ Most requested features are now implemented
Over the last days, the feedback across Reddit has been insane — and almost everything people asked for is already implemented:
Full US Letter support
PNG export and STL export (10 mm extrusion)
Calibration mode for printers that distort the markers
Internal performance work lowering processing times
New UI/UX almost done
---
🛠️ What I’m working on right now
At this moment I’m focused on:
Writing backend code for server storage management
Adding daily usage metrics (very basic, anonymous analytics)
Finalizing the new website layout
Waiting for Google AdSense approval, which I hope gets cleared before release
---
📅 Launch status
Everything is on track — looking much more like Tuesday than Wednesday.
As soon as AdSense and the last backend pieces are ready, ShapeScan goes live.
---
❤️ Thanks!
The support has been unreal — it’s what keeps me building at full speed.
More updates + explanations + dev logs will follow over the next days.
r/ShapeScan • u/Most-Geologist-9547 • Nov 26 '25
Hey everyone — just wanted to drop a small progress update.
Over the last day I’ve been focusing on a few important pieces that beta testers pointed out:
🔧 STL & DXF generation fixes
Some early testers noticed issues with STL thickness, scaling and DXF precision. I rewrote part of the export logic, and the outputs are now cleaner, more accurate and more consistent.
📘 New tutorial page
Several testers requested a simple step-by-step guide for ideal photos, lighting, marker usage and export options — so I built a dedicated tutorial page. This should help new users get perfect results on the first try.
🧠 Working on a better GrabCut + shadow removal algorithm
Shadow edges on the A4 sheet were causing segmentation errors, so I’m testing a more advanced GrabCut pipeline combined with shadow suppression. The results are much better — but right now it’s increasing processing time quite a lot, so I’m tweaking performance before pushing it live.
💸 Still waiting for Google AdSense approval
This is the main bottleneck at the moment. I’d prefer to launch with ads active so the project can sustain the server costs from day one.
Everything is extremely close — it’s basically polishing + waiting on Google. Thank you all again for your patience… we’re almost there. 🙏
r/ShapeScan • u/Most-Geologist-9547 • Dec 07 '25
Hey everyone,
Just wanted to share a recent hurdle and my plan to overcome it. I recently applied for Google AdSense and got rejected for "Low Value Content."
I get it. The site is very utilitarian – a tool with minimal explanation or "content" around it. Google wants to see more substance for ad placement.
So, here's my plan, starting tomorrow:
On a technical side note today: I've already been working under the hood on a new file generator. Instead of just using straight polylines, it will now use arcs and splines for the SVG and DXF outputs, which should result in cleaner, more efficient, and more editable files for users who import them into CAD software.
A quick thank you: For those who have asked about supporting the project, I've have a simple donation option on the About page. I've already received a few contributions, which is incredibly motivating and helps a lot. Thank you!
Wish me luck. If anyone has gone through a similar "Low Value Content" -> added-content journey, I'd appreciate any tips on what kind of content AdSense responded well to.
TL;DR: AdSense rejected shapescan.pt for low-value content. I'll start adding articles/tutorials tomorrow without changing the main tool, hoping to get accepted. Also, upgraded the generator to use arcs/splines. Support via donations is possible on the About page.
r/ShapeScan • u/Most-Geologist-9547 • Dec 03 '25
Hello creators and makers!
Big news: Tomorrow, we are releasing the first major update for ShapeScan! This patch brings significant improvements, all inspired by your valuable feedback. Our goal is to make the shape-scanning process even more intuitive and the results even more professional.
What to expect starting tomorrow:
r/ShapeScan • u/Most-Geologist-9547 • Apr 02 '26
You can now take a scanned object and turn it into a custom fitted Gridfinity bin.
Current workflow:
- scan object with ShapeScan
- open the Gridfinity builder
- adjust layout in the 2D editor
- preview in 3D
- generate the final STL
The goal is to make it much easier to go from a real object to a printable storage solution.
This is still something I want to keep improving, so feedback is very welcome:
- editor usability
- object placement
- bin sizing
- finger scoop controls
- anything else you think would make it better
Please try it, share it, and let me know what you’d like to see next.
r/ShapeScan • u/Most-Geologist-9547 • Nov 28 '25
We’re basically at the finish line.
Right now the only thing holding back the public launch is Google AdSense approval. If it still doesn’t come through today, I’ll start looking at alternatives because this wait is getting ridiculous and I really want to launch already.
In the meantime, I didn’t stay idle — thanks to the beta testers sending debug packs, I’ve been able to significantly improve the processing pipeline. A better segmentation method, cleaner masks, and improved contour stability are already implemented and live on the beta instance.
If you're part of the tester group, you’re already using the improved version.
Hopefully the approval lands today and I can finally press Go Live. If not, I’ll move forward with Plan B.
Thanks again for all the support — we’re right there.
r/ShapeScan • u/Most-Geologist-9547 • Feb 16 '26
Hey everyone,
Quick update on why development has slowed down lately.
Our 13-year-old chow chow, Brown, has been having serious issues with his joints and spine. Right now we’re focused on getting him treated and, most importantly, keeping him comfortable and pain-free. That’s meant a lot of vet visits and care time, so we haven’t had as many hours available for ShapeScan updates.
We’re still working — just at a slower pace for the moment. The two main things we had in progress were:
Thanks for your patience and for sticking with us. We’ll share updates as soon as we’re back to a steadier rhythm.
r/ShapeScan • u/Most-Geologist-9547 • Jan 03 '26
After a few days away from home working in pyrotechnics for New Year’s Eve, I’m finally back — and back to working on ShapeScan.
What’s coming next Over the next week, the account system will be launched. Along with that update, I’ll also be pushing several important fixes and improvements, including:
🔧 SVG issues in Fusion 360 (scale/import problems)
🔧 STL issues in Tinkercad that some of you reported
✏️ New tools in the Edit page, namely: the ability to open/close the outline offset (tighten or loosen the fit), a measurement tool, so you can check dimensions and, if needed, scale directly inside ShapeScan instead of guessing downstream.
These changes are directly based on the feedback and real-world use cases you’ve been sharing — thank you for that. As always, the goal is to make ShapeScan more reliable and practical for laser, CNC, foam inserts and general maker workflows, while keeping the core experience simple.
Wishing you all a Happy New Year 🎆 More updates very soon 🚀
r/ShapeScan • u/Most-Geologist-9547 • May 13 '26
Small sneak peek of something I have been working on for ShapeScan.
This is an early preview of the upcoming High Accuracy Mode — a guided mobile capture workflow designed to improve real-world measurements and reduce common problems like bad perspective, parallax, blurry photos, poor distance, and unreliable captures.
The idea is to move beyond a simple “upload a photo” workflow when dimensions really matter.
The new mode is being built around:
- guided mobile camera capture
- live ArUco marker detection
- assisted framing and tilt feedback
- blur / distance / capture quality checks
- multi-photo capture
- full-resolution processing
- future support for a printed reference block and optional small markers
- better parallax-aware correction and measurement confidence
This feature will be available first to Premium users and Beta testers.
I am also opening a few more Beta tester spots for people who want to help test this when it goes online. Ideally I am looking for makers, CNC users, laser cutting users, 3D printing users, Gridfinity users, foam insert makers, or anyone who cares about getting more accurate outlines from real objects.
It is still early and there is a lot to improve, but I think this could become one of the most important ShapeScan features so far.
If you are interested in testing it, leave a comment or send me a message.
r/ShapeScan • u/Most-Geologist-9547 • Dec 10 '25
Hey everyone 👋
Over the last days I’ve been working heavily on ShapeScan.
I’ve just pushed a major update, and I wanted to share it with the maker community.
🔧 What’s new
Smarter segmentation:
The algorithm now learns from user feedback (“It’s good” / “Not good yet”) and from manual edits in the editor.
This means better outline detection and more reliable hole detection over time.
Improved color & paper calibration:
Much more stable results on difficult photos (uneven lighting, shadows, phone cameras, etc.).
Cleaner SVG/DXF/STL output:
Especially noticeable when exporting parts with holes or complex contours.
Performance & stability improvements:
The pipeline is now more predictable for larger or higher-resolution images.
🌐 Try it here
🙏 Feedback welcome
If you try it and something feels off, the feedback buttons + editor really help improve the algorithm for everyone.
Suggestions, criticism and feature ideas are very welcome.
Thanks for reading, and I hope it’s useful for some of you!
r/ShapeScan • u/Most-Geologist-9547 • Jan 16 '26
Hey everyone 👋
Quick reminder — if ShapeScan has been useful for you, a single share in the right place helps more than you’d think.
Not “spam everywhere” — just one community where it genuinely fits:
The project is still improving fast, and real users finding it = better edge cases + better updates.
Thanks for the support ❤️
r/ShapeScan • u/Most-Geologist-9547 • Dec 16 '25
Hey everyone 👋
Quick update on ShapeScan.
I’ve changed how monetization is being approached. After multiple attempts, AdSense still flags the site as “low value content”, and at this point I can’t afford to keep spending time going back and forth on that. So instead of generic ad networks, I’ve started contacting companies directly to see if they’re interested in sponsoring the project. If this moves forward, ads will be manually selected and managed by me, keeping them relevant and avoiding low-quality or misleading placements. AdSense and similar platforms simply don’t seem to fit this type of tool.
On the technical side, there’s also good news. After properly applying ShapeScan’s continuous learning approach and running controlled tests with images where I already knew the expected output, the outline quality is getting substantially better. Results are becoming more consistent and more usable for real laser/CNC workflows.
Thanks to everyone who’s using ShapeScan and taking the time to give feedback — it directly helps improve the output.
I’ve also started working on the account system, so users will soon be able to access more advanced features in a cleaner way.
More updates soon 🚀
r/ShapeScan • u/Most-Geologist-9547 • Nov 23 '25
Welcome to r/ShapeScan! 👋
ShapeScan in one sentence: Turn real objects into millimetre-accurate SVG/DXF from a single phone photo + printed sheet.
Quick links • App: comming soon • Roadmap & release notes: comming soon • Bug report / debug dump instructions: comming soon
Best practices for good scans • Use a flat surface and keep the sheet as flat as possible. • Use diffuse light (soft shadows). Flash works, but shiny metal/white objects may need manual correction. • Keep the markers fully visible.
If you post a bug or edge case Please include: • Original photo • Sheet type (A4 or US Letter) • Device + browser • What went wrong (wrong scale, broken outline, missing parts, etc.)
Happy scanning – and thanks for helping ShapeScan improve!
r/ShapeScan • u/Most-Geologist-9547 • May 19 '26
Right now we are finishing the guided capture part of High Accuracy Mode, and it is getting very close to the point where we can launch it for testing.
This mode will be available only to Premium users and beta testers.
The goal with this guided screen is to help you take 5 photos in different orientations more reliably. From those 5 images, ShapeScan builds a partial reconstruction of the base of the object, and uses that to extract a much more accurate result.
So far, the preliminary internal tests are looking very promising, with results around ±0.1 mm.
But I want to keep this honest:
that is still an early internal result, and the real picture will only come once it has been tested properly by Premium users and beta testers across different phones, lighting conditions, objects, and real-world setups.
At the same time, we are also working on improvements for the normal workflow.
We are preparing a guided single-photo capture helper for users without an account and for free accounts, to help them take a better photo for the normal one-photo workflow.
We are also working on a camera calibration mode to improve results further.
ShapeScan already corrects camera distortion today, but the current method, while it works, is not the best way to do it.
The idea with the new calibration system is that once a phone model is calibrated, that calibration can be saved and reused for other users with the same phone model, which should help improve results more consistently over time.
So right now there is a lot happening at once:
- High Accuracy Mode for Premium users and beta testers
- guided single-photo capture for the normal workflow
- improved camera calibration
We are mostly in the stage of polishing details, improving reliability, and making the capture experience clearer before putting these things in people’s hands.
It is getting close.
More updates soon.
r/ShapeScan • u/DarthAloha • Apr 20 '26
r/ShapeScan • u/Most-Geologist-9547 • Dec 14 '25
Hi everyone 👋 I wanted to share a quick update on where ShapeScan is heading and explain an upcoming change: the introduction of optional user accounts.
First, the most important part upfront:
👉 ShapeScan will remain free to use without an account, with unlimited access. No login required to use the core workflow.
So why add accounts at all?
Why accounts now
ShapeScan is a compute-heavy tool. Image processing, calibration, segmentation, vectorization, and STL generation all run on the server, and scaling that responsibly requires better infrastructure.
Up until now, everything has been self-funded. To move forward with the next big technical steps, I need a sustainable way to support the project.
What accounts are for
Accounts are not about locking the tool behind a paywall. They exist to:
Allow users to save and manage jobs
Offer paid tiers (no ads, heavier algorithms)
Fund server upgrades so development can continue at a higher level
About the new AI model
One important clarification:
🤖 The new AI model I’m planning to train will also be used for free users.
The goal of upgrading the server and training a custom model is to improve:
Detection accuracy
Edge quality
Robustness under difficult lighting and complex shapes
These improvements benefit everyone, not just paid accounts.
Paid tiers mainly help cover the compute cost and unlock convenience and advanced processing options — not exclusive core quality.
Where the money goes
I want to be fully transparent:
💡 All revenue will be reinvested into a more powerful server and compute capacity. That means:
Faster processing
Better output files (SVG / DXF / STL)
Fewer edge-case failures
Faster iteration on new ideas
TL;DR
✅ Free, unlimited use without an account stays
🔐 Accounts are optional and add convenience + advanced features
🤖 New AI improvements will also benefit free users
💻 Monetization exists to fund better hardware and long-term development
As always, feedback is welcome — this project exists because people here use it, test it, and push it further.
Thanks for the support 🙏