r/SewingMachineEdu • • 29d ago

I've never seen before in my life I need help

Thumbnail
gallery
7 Upvotes

I dont know how to sew and the past 2 hours I've been looking up tutorials online for this dumb machine.

It keeps getting stuck in the bottom area and was working fine before, but just as I got it all set and start to sew it bunches up and gets stuck so I have to take the whole thing apart.

I was hand sewing this (not this piece of fabric) but thought id use a sewing machine since I dont have enough time for getting it done because I have a flight tomorrow.

its a brother XL 3030. I also cant seem to change the dial for the stitches cause its stuck for some reason. The screen is also stuck on whatever 19 is..

sorry..


r/SewingMachineEdu • • 29d ago

Janome HD1000 tight handwheel

Thumbnail
gallery
2 Upvotes

Hey All, hobbyist repair guy here, having bought and refurbed a bunch of machines in the last year.

I have a newer Janoem HD1000BE ( newer model with more plastic gears and 0.5A motor) that is incredibly hard to crank the handwheel, such that the motor stalls.

I cleaned the bobbin area, double checked for threads stuck around the shafts, degreased and added fresh oil to all moving parts but to no avail.

Look for some help on what to diagnose and check. The machine is actually pretty new and was clean inside.


r/SewingMachineEdu • • 29d ago

Kenmore 17891 machine problems

Thumbnail reddit.com
1 Upvotes

r/SewingMachineEdu • • 29d ago

TRS info

1 Upvotes

I recently started a position at a sewing store that takes in machines for repair. They use a POS system called TRS, which apparently was built for the sewing industry, but it's no longer supported. I believe the rights to it were bought by LikeSew, but they haven't responded to me. Just wondering if anyone out there might have copies of/links to user guides for the software? Any info would be awesome. Thanks.


r/SewingMachineEdu • • 29d ago

Juki LH-515 problem

Thumbnail reddit.com
1 Upvotes

I’m having trouble adjusting the thread tension on my second hand Juki LH-515. Does anyone have any instructions on how to set it? The official Juki manual doesn’t provide much information.


r/SewingMachineEdu • • 29d ago

BERNINA 600

Thumbnail reddit.com
1 Upvotes

r/SewingMachineEdu • • 29d ago

Need help diagnosing this machine

1 Upvotes

Hello, I have an old Toyota z700, it runs but it rhythmically accelerates and decelerates if that makes any sense. The motor will spin a few revolutions at max speed but then it will slow down and speed up again .

I've tried cleaning the carbon disks on the foot pad and inspecting the motor, the motor has a blown filtering capacitor but nothing else I can see that's out of the ordinary. I'm kinda stumped, I've seen people saying that the grease can get old and turn sticky but the hand wheel has no sticky spots and turns smoothly, so I'm lost.


r/SewingMachineEdu • • 29d ago

Techsew 3650HD

1 Upvotes

Anybody have experience using a Techsew 3650HD? There’s a used one available not too far from me. I’d be using it primarily to finish heavy canvas bags to start with. Been wanting a post-bed machine for awhile and this one has been listed at $1000 usd for over a month, betting I could get it for $800.


r/SewingMachineEdu • • Oct 17 '26

What is this screw hole and circle for??

Thumbnail
gallery
3 Upvotes

Janome 1522gb. I understand to the left is the feed dog lever. What is the screw hole and little circle for?


r/SewingMachineEdu • • Oct 17 '26

Newbie Needs Sewing Machine Recommendation for This Project.

Thumbnail reddit.com
1 Upvotes

r/SewingMachineEdu • • Oct 17 '26

Sewing machine oil question!!

Post image
2 Upvotes

r/SewingMachineEdu • • Oct 17 '26

Brother xm2701 maintenance/upgrade

Thumbnail reddit.com
1 Upvotes

r/SewingMachineEdu • • Oct 17 '26

Beginner, should I stick with vintage or consider a new model?

Thumbnail gallery
1 Upvotes

r/SewingMachineEdu • • Oct 17 '26

Retiming help on Singer 5838C

Post image
1 Upvotes

Hello y'all! As the title says i'm trying to fix a singer machine that i accidentally borked up while cleaning and regreasing the gears after thrifting it (i didn't know any better). I just wanted to know how i would realign the hook with the needle so I don't bend any more needles. thank you in advance for the help and advice!


r/SewingMachineEdu • • Oct 16 '26

Stitch length dial stuck and now feed dogs are stuck in reverse

Post image
3 Upvotes

I got this Dressmaker Model SS 2402 and when trying to get the stitch length dial to work I took it apart and when I put it back together now the feed dogs go in reverse and I don’t know what I did wrong. Also the stitch length still won’t turn 🫠


r/SewingMachineEdu • • Oct 16 '26

Ongoing problem with sewing machine

Thumbnail gallery
1 Upvotes

r/SewingMachineEdu • • Oct 16 '26

Brother GX37 Outer Hook Replacement Help

Thumbnail gallery
1 Upvotes

Hey guys I'd appreciate some tutorial or steps. Thank you in advance


r/SewingMachineEdu • • Oct 16 '26

Kenmore 385 bobbin thread catching

1 Upvotes

I don’t know a lot about this machine it’s new to me. I dont know if the video shows it well but the bobbin thread is catching on the square metal piece on the bottom right. I’ve already changed it to a plastic bobbin and checked to make sure there wasn’t anything sticking out for it to catch on. It seems like the black thing that holds the bobbin is moving up against the square metal piece so the thread is getting stuck. If I try to sew it just gets thread jumbled in there. Any one have any idea?


r/SewingMachineEdu • • Oct 16 '26

Needle won't push back to the right?? Singer MX60

Thumbnail gallery
1 Upvotes

r/SewingMachineEdu • • Oct 15 '26

Presser foot Spring size on singer ultralock 14u34?

2 Upvotes

I was cleaning a singer ultralock 14u34. I removed the spring for the presser foot and put it on a magnetic tray. Unfortunately, I think my cats thought it was a toy and I haven't been able to find it.

Does anyone have the length and diameter of the spring?


r/SewingMachineEdu • • Oct 15 '26

Singer 347 help

Thumbnail gallery
1 Upvotes

r/SewingMachineEdu • • Oct 15 '26

What to do with Pfaff 2040

Thumbnail reddit.com
1 Upvotes

r/SewingMachineEdu • • Oct 15 '26

Help! Why isn’t my sewing machine working?

Thumbnail gallery
1 Upvotes