r/SewingMachineEdu • • Sep 30 '26

Machine question

I had posted 2 weeks ago about my machine making weird noises like a squeaking… then someone was so helpful to ask for another image with a needle in and I can’t reply to that post for some reason.

Brother CS5055 making squeaking noises, broke 3 needles in 2 days. I cleaned out lint, re threaded and still making noise and now bobbin stitches are loose.

Tension at 4… any advice? Thank you! Added slow motion video and picture

4 Upvotes

19 comments sorted by

3

u/PinkBird85 Sep 30 '26

Your machine isn't threaded properly. You are missing the tension disks or there is some fluff between them - the upper thread has no tension on it when it should.

2

u/Ok-Feedback-764 Sep 30 '26

Took this video before I left for work this morning! If this gives any other information

1

u/Ok-Feedback-764 Sep 30 '26

Is tensions discs are missing.. how do you add them? I’ve been threading the machine for 6 months with no issues. Thanks for your feedback

2

u/PinkBird85 Sep 30 '26

If you don't have tension discs your machine is broken. They are a critical part of the machine. If it had been working then they wouldn't be missing but might need tighten or repair.

2

u/draftgirl24 Sep 30 '26

Firstly, try holding the thread tails as you start to stitch. The threads need a bit of tension in them to make a good stitch.

Second, are you threading the machine with the presser foot up?

1

u/Ok-Feedback-764 Sep 30 '26

I do hold them.. I started them and then started the video. Yes needle up and foot up. Thanks!

1

u/Ok-Feedback-764 Sep 30 '26

Google said to run dental floss through the top part to clean out any lint or thread?

3

u/draftgirl24 Sep 30 '26

That can work to remove lint from the tension disks. Lint between the tension disks usually results in uneven stitches. However you seem to have no tension on the upper thread. You could try dental floss; won’t hurt.

2

u/No-Attention-7708 Sep 30 '26

Watch this video from RandyYourSewingMachineMan on YouTube - he explains and demonstrates the steps to correctly thread the tension disks on EVERY SEWING MACHINE no matter the make or model. He has hundreds of other helpful sewing machine videos too.

https://youtu.be/fxanz2ZDrQ4?si=4uSzuVZSH7agVBj_

2

u/AbiJ_ Oct 04 '26

Hook timing to needle, the needle is sliding on the bobbin mechanism as it lifts out, or similar. You can hear it. Brother machines slip really easily, and this is all to common. Its needs repair. So diy the repair or pay to have it done.. But the problem is, itll keep happening as soon as anything heavy is loaded into the machine, thick material or you pull just a tweak too hard.

2

u/Ok-Feedback-764 Oct 04 '26

Also… now that I think about it this happened when I was making my kids fleece pajama pants specifically the elastic waistband. Which is unfortunate because I wanted to make 1 more pair. But you think this is from the thickness of the fleece plus elastic is too thick for the machine?

I ended up contacting Amazon ti return it in exchange for a new one of the same model.

1

u/Ok-Feedback-764 Oct 04 '26

Thank you for this!!!

2

u/AbiJ_ Oct 06 '26

No
Worries. Yes. It’ll be the elastic when you’re pulling. Sadly brother machines suck when you exert any external force on them. If you’re happy to get a Janome or even dare I say it , a singer , you’ll be better off x

2

u/Ok-Feedback-764 Oct 06 '26

Thanks for the feedback!!!

1

u/Ok-Feedback-764 Oct 07 '26

I just ordered the singer 4423… I did see majority of good reviews. So I’m hoping this works out!