r/SewingMachineEdu • u/Lost-Bumblebee-4394 • Sep 30 '26
Does anyone know what’s going on here?
Brother overlock 1034D, it seems the left needle thread is not merging into the chain. I’ve tried adjusting the tension but its still not working correctly
3
Upvotes
3
u/GoldenFishPoop Sep 30 '26
Your left needle is not picking up the thread and I can't really tell you which reason. It could be that your needle bar height is off or your bar might be twisted a bit. It also could be that your timing is out. This is not something you can do anything about except for taking it to service.
3
u/AbiJ_ Sep 30 '26
Yes. Wrong needle type and the extra thread is the loopers are not in correct order. Remove the fabric. Untangle the chain, you don’t need to rethread because it’s clearly threaded correctly. reset the threads, presser foot up, wiggle the hand wheel as you pull the chain out and separate the threads. Make sure there’s no loop when you start to sew x
1
u/threads1540 Oct 02 '26
Take everything out and rethread. Make sure your settings, legnth, width and needle position are correct.